[PATCH v3 2/3] can: flexcan: add NXP S32G2/S32G3 SoC support

Ciprian Costea posted 3 patches 4 days, 7 hours ago
Only 2 patches received!
[PATCH v3 2/3] can: flexcan: add NXP S32G2/S32G3 SoC support
Posted by Ciprian Costea 4 days, 7 hours ago
From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>

Add device type data for S32G2/S32G3 SoC.

FlexCAN module from S32G2/S32G3 is similar with i.MX SoCs, but interrupt
management is different. This initial S32G2/S32G3 SoC FlexCAN support
paves the road to address such differences.

Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
---
 drivers/net/can/flexcan/flexcan-core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
index ac1a860986df..f0dee04800d3 100644
--- a/drivers/net/can/flexcan/flexcan-core.c
+++ b/drivers/net/can/flexcan/flexcan-core.c
@@ -386,6 +386,15 @@ static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = {
 		FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR,
 };
 
+static const struct flexcan_devtype_data nxp_s32g2_devtype_data = {
+	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
+		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+		FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_SUPPORT_FD |
+		FLEXCAN_QUIRK_SUPPORT_ECC |
+		FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR,
+};
+
 static const struct can_bittiming_const flexcan_bittiming_const = {
 	.name = DRV_NAME,
 	.tseg1_min = 4,
@@ -2041,6 +2050,7 @@ static const struct of_device_id flexcan_of_match[] = {
 	{ .compatible = "fsl,vf610-flexcan", .data = &fsl_vf610_devtype_data, },
 	{ .compatible = "fsl,ls1021ar2-flexcan", .data = &fsl_ls1021a_r2_devtype_data, },
 	{ .compatible = "fsl,lx2160ar1-flexcan", .data = &fsl_lx2160a_r1_devtype_data, },
+	{ .compatible = "nxp,s32g2-flexcan", .data = &nxp_s32g2_devtype_data, },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, flexcan_of_match);
-- 
2.45.2