drivers/gpu/drm/vkms/vkms_drv.c | 2 +- drivers/gpu/drm/vkms/vkms_drv.h | 8 ++----- drivers/gpu/drm/vkms/vkms_output.c | 49 +++++++++++++------------------------- drivers/gpu/drm/vkms/vkms_plane.c | 4 ++-- 4 files changed, 21 insertions(+), 42 deletions(-)
VKMS currently supports only one CRTC, so it make no sense to have this
index configurable. To avoid issues, replace this hardcoded index by
drm_crtc_mask when applicable.
There is no need to manually set a crtc mask on primary and cursor plane
as it is automatically set by drmm_crtc_alloc_with_planes.
In addition, this will remove the use of an uninitialized structure in
vkms_add_overlay_plane. This currently works by chance because two things:
- vkms_plane_init always set a possible_crtcs value, so the problematic
branch is never used;
- drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
always have this id.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
---
Changes in v3:
- Rebased on drm-misc-next
- Link to v2: https://lore.kernel.org/r/20241010-vkms-remove-index-v2-1-6b8d6cfd5a15@bootlin.com
Changes in v2:
- Applied comments from José
- Link to v1: https://lore.kernel.org/r/20240906-vkms-remove-index-v1-1-3cfedd8ccb2f@bootlin.com
---
drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
drivers/gpu/drm/vkms/vkms_drv.h | 8 ++-----
drivers/gpu/drm/vkms/vkms_output.c | 49 +++++++++++++-------------------------
drivers/gpu/drm/vkms/vkms_plane.c | 4 ++--
4 files changed, 21 insertions(+), 42 deletions(-)
diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
index bab13943d8e0085bed85092d7bc8727d834768a9..e4ae69d9ef871c9ce436ad0bd8c6551d8fe7f55c 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.c
+++ b/drivers/gpu/drm/vkms/vkms_drv.c
@@ -174,7 +174,7 @@ static int vkms_modeset_init(struct vkms_device *vkmsdev)
dev->mode_config.preferred_depth = 0;
dev->mode_config.helper_private = &vkms_mode_config_helpers;
- return vkms_output_init(vkmsdev, 0);
+ return vkms_output_init(vkmsdev);
}
static int vkms_create(struct vkms_config *config)
diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
index 672fe191e239c03e7358d43eb19215361417a781..036101ee4ea1cb0a335cd2ea78a8ca9da87fbe93 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.h
+++ b/drivers/gpu/drm/vkms/vkms_drv.h
@@ -212,21 +212,17 @@ int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
* vkms_output_init() - Initialize all sub-components needed for a VKMS device.
*
* @vkmsdev: VKMS device to initialize
- * @index: CRTC which can be attached to the planes. The caller must ensure that
- * @index is positive and less or equals to 31.
*/
-int vkms_output_init(struct vkms_device *vkmsdev, int index);
+int vkms_output_init(struct vkms_device *vkmsdev);
/**
* vkms_plane_init() - Initialize a plane
*
* @vkmsdev: VKMS device containing the plane
* @type: type of plane to initialize
- * @index: CRTC which can be attached to the plane. The caller must ensure that
- * @index is positive and less or equals to 31.
*/
struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
- enum drm_plane_type type, int index);
+ enum drm_plane_type type);
/* CRC Support */
const char *const *vkms_get_crc_sources(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
index 25a99fde126c7402941954015287ab0887484139..8f4bd5aef087b459d37d0cbbf90fe0145090917a 100644
--- a/drivers/gpu/drm/vkms/vkms_output.c
+++ b/drivers/gpu/drm/vkms/vkms_output.c
@@ -32,29 +32,14 @@ static const struct drm_connector_helper_funcs vkms_conn_helper_funcs = {
.get_modes = vkms_conn_get_modes,
};
-static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
- struct drm_crtc *crtc)
-{
- struct vkms_plane *overlay;
-
- overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
- if (IS_ERR(overlay))
- return PTR_ERR(overlay);
-
- if (!overlay->base.possible_crtcs)
- overlay->base.possible_crtcs = drm_crtc_mask(crtc);
-
- return 0;
-}
-
-int vkms_output_init(struct vkms_device *vkmsdev, int index)
+int vkms_output_init(struct vkms_device *vkmsdev)
{
struct vkms_output *output = &vkmsdev->output;
struct drm_device *dev = &vkmsdev->drm;
struct drm_connector *connector = &output->connector;
struct drm_encoder *encoder = &output->encoder;
struct drm_crtc *crtc = &output->crtc;
- struct vkms_plane *primary, *cursor = NULL;
+ struct vkms_plane *primary, *overlay, *cursor = NULL;
int ret;
int writeback;
unsigned int n;
@@ -65,29 +50,31 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
* The overlay and cursor planes are not mandatory, but can be used to perform complex
* composition.
*/
- primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
+ primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY);
if (IS_ERR(primary))
return PTR_ERR(primary);
- if (vkmsdev->config->overlay) {
- for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
- ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
- if (ret)
- return ret;
- }
- }
-
if (vkmsdev->config->cursor) {
- cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
+ cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR);
if (IS_ERR(cursor))
return PTR_ERR(cursor);
}
- /* [1]: Allocation of a CRTC, its index will be BIT(0) = 1 */
ret = vkms_crtc_init(dev, crtc, &primary->base, &cursor->base);
if (ret)
return ret;
+ if (vkmsdev->config->overlay) {
+ for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
+ overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY);
+ if (IS_ERR(overlay)) {
+ DRM_DEV_ERROR(dev->dev, "Failed to init vkms plane\n");
+ return PTR_ERR(overlay);
+ }
+ overlay->base.possible_crtcs = drm_crtc_mask(crtc);
+ }
+ }
+
ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
DRM_MODE_CONNECTOR_VIRTUAL);
if (ret) {
@@ -103,11 +90,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
DRM_ERROR("Failed to init encoder\n");
goto err_encoder;
}
- /*
- * This is a hardcoded value to select crtc for the encoder.
- * BIT(0) here designate the first registered CRTC, the one allocated in [1]
- */
- encoder->possible_crtcs = BIT(0);
+ encoder->possible_crtcs = drm_crtc_mask(crtc);
ret = drm_connector_attach_encoder(connector, encoder);
if (ret) {
diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
index e5c625ab8e3e06cb95f468c59bc3b06ef85eab6f..ad137c9a75f5e9ee3bb62e7bb2c5e3684a6ecbb6 100644
--- a/drivers/gpu/drm/vkms/vkms_plane.c
+++ b/drivers/gpu/drm/vkms/vkms_plane.c
@@ -198,12 +198,12 @@ static const struct drm_plane_helper_funcs vkms_plane_helper_funcs = {
};
struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
- enum drm_plane_type type, int index)
+ enum drm_plane_type type)
{
struct drm_device *dev = &vkmsdev->drm;
struct vkms_plane *plane;
- plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 << index,
+ plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 0,
&vkms_plane_funcs,
vkms_formats, ARRAY_SIZE(vkms_formats),
NULL, type, NULL);
---
base-commit: 7d2faa8dbb7055a115fe0cd6068d7090094a573d
change-id: 20240906-vkms-remove-index-3a6e04c38e02
Best regards,
--
Louis Chauvet <louis.chauvet@bootlin.com>
On 19/11/24 - 14:34, Louis Chauvet wrote:
> VKMS currently supports only one CRTC, so it make no sense to have this
> index configurable. To avoid issues, replace this hardcoded index by
> drm_crtc_mask when applicable.
>
> There is no need to manually set a crtc mask on primary and cursor plane
> as it is automatically set by drmm_crtc_alloc_with_planes.
>
> In addition, this will remove the use of an uninitialized structure in
> vkms_add_overlay_plane. This currently works by chance because two things:
> - vkms_plane_init always set a possible_crtcs value, so the problematic
> branch is never used;
> - drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
> always have this id.
>
> Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Applied on drm-misc-next:
https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/12e755103f2404fa87bd1d7af93100ec45b43feb
> ---
> Changes in v3:
> - Rebased on drm-misc-next
> - Link to v2: https://lore.kernel.org/r/20241010-vkms-remove-index-v2-1-6b8d6cfd5a15@bootlin.com
>
> Changes in v2:
> - Applied comments from José
> - Link to v1: https://lore.kernel.org/r/20240906-vkms-remove-index-v1-1-3cfedd8ccb2f@bootlin.com
> ---
> drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
> drivers/gpu/drm/vkms/vkms_drv.h | 8 ++-----
> drivers/gpu/drm/vkms/vkms_output.c | 49 +++++++++++++-------------------------
> drivers/gpu/drm/vkms/vkms_plane.c | 4 ++--
> 4 files changed, 21 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> index bab13943d8e0085bed85092d7bc8727d834768a9..e4ae69d9ef871c9ce436ad0bd8c6551d8fe7f55c 100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.c
> +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> @@ -174,7 +174,7 @@ static int vkms_modeset_init(struct vkms_device *vkmsdev)
> dev->mode_config.preferred_depth = 0;
> dev->mode_config.helper_private = &vkms_mode_config_helpers;
>
> - return vkms_output_init(vkmsdev, 0);
> + return vkms_output_init(vkmsdev);
> }
>
> static int vkms_create(struct vkms_config *config)
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> index 672fe191e239c03e7358d43eb19215361417a781..036101ee4ea1cb0a335cd2ea78a8ca9da87fbe93 100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.h
> +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> @@ -212,21 +212,17 @@ int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> * vkms_output_init() - Initialize all sub-components needed for a VKMS device.
> *
> * @vkmsdev: VKMS device to initialize
> - * @index: CRTC which can be attached to the planes. The caller must ensure that
> - * @index is positive and less or equals to 31.
> */
> -int vkms_output_init(struct vkms_device *vkmsdev, int index);
> +int vkms_output_init(struct vkms_device *vkmsdev);
>
> /**
> * vkms_plane_init() - Initialize a plane
> *
> * @vkmsdev: VKMS device containing the plane
> * @type: type of plane to initialize
> - * @index: CRTC which can be attached to the plane. The caller must ensure that
> - * @index is positive and less or equals to 31.
> */
> struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> - enum drm_plane_type type, int index);
> + enum drm_plane_type type);
>
> /* CRC Support */
> const char *const *vkms_get_crc_sources(struct drm_crtc *crtc,
> diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
> index 25a99fde126c7402941954015287ab0887484139..8f4bd5aef087b459d37d0cbbf90fe0145090917a 100644
> --- a/drivers/gpu/drm/vkms/vkms_output.c
> +++ b/drivers/gpu/drm/vkms/vkms_output.c
> @@ -32,29 +32,14 @@ static const struct drm_connector_helper_funcs vkms_conn_helper_funcs = {
> .get_modes = vkms_conn_get_modes,
> };
>
> -static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
> - struct drm_crtc *crtc)
> -{
> - struct vkms_plane *overlay;
> -
> - overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
> - if (IS_ERR(overlay))
> - return PTR_ERR(overlay);
> -
> - if (!overlay->base.possible_crtcs)
> - overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> -
> - return 0;
> -}
> -
> -int vkms_output_init(struct vkms_device *vkmsdev, int index)
> +int vkms_output_init(struct vkms_device *vkmsdev)
> {
> struct vkms_output *output = &vkmsdev->output;
> struct drm_device *dev = &vkmsdev->drm;
> struct drm_connector *connector = &output->connector;
> struct drm_encoder *encoder = &output->encoder;
> struct drm_crtc *crtc = &output->crtc;
> - struct vkms_plane *primary, *cursor = NULL;
> + struct vkms_plane *primary, *overlay, *cursor = NULL;
> int ret;
> int writeback;
> unsigned int n;
> @@ -65,29 +50,31 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> * The overlay and cursor planes are not mandatory, but can be used to perform complex
> * composition.
> */
> - primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
> + primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY);
> if (IS_ERR(primary))
> return PTR_ERR(primary);
>
> - if (vkmsdev->config->overlay) {
> - for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> - ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
> - if (ret)
> - return ret;
> - }
> - }
> -
> if (vkmsdev->config->cursor) {
> - cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
> + cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR);
> if (IS_ERR(cursor))
> return PTR_ERR(cursor);
> }
>
> - /* [1]: Allocation of a CRTC, its index will be BIT(0) = 1 */
> ret = vkms_crtc_init(dev, crtc, &primary->base, &cursor->base);
> if (ret)
> return ret;
>
> + if (vkmsdev->config->overlay) {
> + for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> + overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY);
> + if (IS_ERR(overlay)) {
> + DRM_DEV_ERROR(dev->dev, "Failed to init vkms plane\n");
> + return PTR_ERR(overlay);
> + }
> + overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> + }
> + }
> +
> ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
> DRM_MODE_CONNECTOR_VIRTUAL);
> if (ret) {
> @@ -103,11 +90,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> DRM_ERROR("Failed to init encoder\n");
> goto err_encoder;
> }
> - /*
> - * This is a hardcoded value to select crtc for the encoder.
> - * BIT(0) here designate the first registered CRTC, the one allocated in [1]
> - */
> - encoder->possible_crtcs = BIT(0);
> + encoder->possible_crtcs = drm_crtc_mask(crtc);
>
> ret = drm_connector_attach_encoder(connector, encoder);
> if (ret) {
> diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
> index e5c625ab8e3e06cb95f468c59bc3b06ef85eab6f..ad137c9a75f5e9ee3bb62e7bb2c5e3684a6ecbb6 100644
> --- a/drivers/gpu/drm/vkms/vkms_plane.c
> +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> @@ -198,12 +198,12 @@ static const struct drm_plane_helper_funcs vkms_plane_helper_funcs = {
> };
>
> struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> - enum drm_plane_type type, int index)
> + enum drm_plane_type type)
> {
> struct drm_device *dev = &vkmsdev->drm;
> struct vkms_plane *plane;
>
> - plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 << index,
> + plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 0,
> &vkms_plane_funcs,
> vkms_formats, ARRAY_SIZE(vkms_formats),
> NULL, type, NULL);
>
> ---
> base-commit: 7d2faa8dbb7055a115fe0cd6068d7090094a573d
> change-id: 20240906-vkms-remove-index-3a6e04c38e02
>
> Best regards,
> --
> Louis Chauvet <louis.chauvet@bootlin.com>
>
On 19/11/24 - 14:34, Louis Chauvet wrote:
> VKMS currently supports only one CRTC, so it make no sense to have this
> index configurable. To avoid issues, replace this hardcoded index by
> drm_crtc_mask when applicable.
>
> There is no need to manually set a crtc mask on primary and cursor plane
> as it is automatically set by drmm_crtc_alloc_with_planes.
>
> In addition, this will remove the use of an uninitialized structure in
> vkms_add_overlay_plane. This currently works by chance because two things:
> - vkms_plane_init always set a possible_crtcs value, so the problematic
> branch is never used;
> - drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
> always have this id.
>
> Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Hi Maíra, José,
You told me "LGTM" for the v2, but without leaving a Acked/Reviewed-by,
should I add them? Or maybe you prefer to formally send them now?
Thanks,
Louis Chauvet
> ---
> Changes in v3:
> - Rebased on drm-misc-next
> - Link to v2: https://lore.kernel.org/r/20241010-vkms-remove-index-v2-1-6b8d6cfd5a15@bootlin.com
>
> Changes in v2:
> - Applied comments from José
> - Link to v1: https://lore.kernel.org/r/20240906-vkms-remove-index-v1-1-3cfedd8ccb2f@bootlin.com
> ---
> drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
> drivers/gpu/drm/vkms/vkms_drv.h | 8 ++-----
> drivers/gpu/drm/vkms/vkms_output.c | 49 +++++++++++++-------------------------
> drivers/gpu/drm/vkms/vkms_plane.c | 4 ++--
> 4 files changed, 21 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> index bab13943d8e0085bed85092d7bc8727d834768a9..e4ae69d9ef871c9ce436ad0bd8c6551d8fe7f55c 100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.c
> +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> @@ -174,7 +174,7 @@ static int vkms_modeset_init(struct vkms_device *vkmsdev)
> dev->mode_config.preferred_depth = 0;
> dev->mode_config.helper_private = &vkms_mode_config_helpers;
>
> - return vkms_output_init(vkmsdev, 0);
> + return vkms_output_init(vkmsdev);
> }
>
> static int vkms_create(struct vkms_config *config)
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> index 672fe191e239c03e7358d43eb19215361417a781..036101ee4ea1cb0a335cd2ea78a8ca9da87fbe93 100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.h
> +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> @@ -212,21 +212,17 @@ int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> * vkms_output_init() - Initialize all sub-components needed for a VKMS device.
> *
> * @vkmsdev: VKMS device to initialize
> - * @index: CRTC which can be attached to the planes. The caller must ensure that
> - * @index is positive and less or equals to 31.
> */
> -int vkms_output_init(struct vkms_device *vkmsdev, int index);
> +int vkms_output_init(struct vkms_device *vkmsdev);
>
> /**
> * vkms_plane_init() - Initialize a plane
> *
> * @vkmsdev: VKMS device containing the plane
> * @type: type of plane to initialize
> - * @index: CRTC which can be attached to the plane. The caller must ensure that
> - * @index is positive and less or equals to 31.
> */
> struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> - enum drm_plane_type type, int index);
> + enum drm_plane_type type);
>
> /* CRC Support */
> const char *const *vkms_get_crc_sources(struct drm_crtc *crtc,
> diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
> index 25a99fde126c7402941954015287ab0887484139..8f4bd5aef087b459d37d0cbbf90fe0145090917a 100644
> --- a/drivers/gpu/drm/vkms/vkms_output.c
> +++ b/drivers/gpu/drm/vkms/vkms_output.c
> @@ -32,29 +32,14 @@ static const struct drm_connector_helper_funcs vkms_conn_helper_funcs = {
> .get_modes = vkms_conn_get_modes,
> };
>
> -static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
> - struct drm_crtc *crtc)
> -{
> - struct vkms_plane *overlay;
> -
> - overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
> - if (IS_ERR(overlay))
> - return PTR_ERR(overlay);
> -
> - if (!overlay->base.possible_crtcs)
> - overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> -
> - return 0;
> -}
> -
> -int vkms_output_init(struct vkms_device *vkmsdev, int index)
> +int vkms_output_init(struct vkms_device *vkmsdev)
> {
> struct vkms_output *output = &vkmsdev->output;
> struct drm_device *dev = &vkmsdev->drm;
> struct drm_connector *connector = &output->connector;
> struct drm_encoder *encoder = &output->encoder;
> struct drm_crtc *crtc = &output->crtc;
> - struct vkms_plane *primary, *cursor = NULL;
> + struct vkms_plane *primary, *overlay, *cursor = NULL;
> int ret;
> int writeback;
> unsigned int n;
> @@ -65,29 +50,31 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> * The overlay and cursor planes are not mandatory, but can be used to perform complex
> * composition.
> */
> - primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
> + primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY);
> if (IS_ERR(primary))
> return PTR_ERR(primary);
>
> - if (vkmsdev->config->overlay) {
> - for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> - ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
> - if (ret)
> - return ret;
> - }
> - }
> -
> if (vkmsdev->config->cursor) {
> - cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
> + cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR);
> if (IS_ERR(cursor))
> return PTR_ERR(cursor);
> }
>
> - /* [1]: Allocation of a CRTC, its index will be BIT(0) = 1 */
> ret = vkms_crtc_init(dev, crtc, &primary->base, &cursor->base);
> if (ret)
> return ret;
>
> + if (vkmsdev->config->overlay) {
> + for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> + overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY);
> + if (IS_ERR(overlay)) {
> + DRM_DEV_ERROR(dev->dev, "Failed to init vkms plane\n");
> + return PTR_ERR(overlay);
> + }
> + overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> + }
> + }
> +
> ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
> DRM_MODE_CONNECTOR_VIRTUAL);
> if (ret) {
> @@ -103,11 +90,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> DRM_ERROR("Failed to init encoder\n");
> goto err_encoder;
> }
> - /*
> - * This is a hardcoded value to select crtc for the encoder.
> - * BIT(0) here designate the first registered CRTC, the one allocated in [1]
> - */
> - encoder->possible_crtcs = BIT(0);
> + encoder->possible_crtcs = drm_crtc_mask(crtc);
>
> ret = drm_connector_attach_encoder(connector, encoder);
> if (ret) {
> diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
> index e5c625ab8e3e06cb95f468c59bc3b06ef85eab6f..ad137c9a75f5e9ee3bb62e7bb2c5e3684a6ecbb6 100644
> --- a/drivers/gpu/drm/vkms/vkms_plane.c
> +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> @@ -198,12 +198,12 @@ static const struct drm_plane_helper_funcs vkms_plane_helper_funcs = {
> };
>
> struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> - enum drm_plane_type type, int index)
> + enum drm_plane_type type)
> {
> struct drm_device *dev = &vkmsdev->drm;
> struct vkms_plane *plane;
>
> - plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 << index,
> + plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 0,
> &vkms_plane_funcs,
> vkms_formats, ARRAY_SIZE(vkms_formats),
> NULL, type, NULL);
>
> ---
> base-commit: 7d2faa8dbb7055a115fe0cd6068d7090094a573d
> change-id: 20240906-vkms-remove-index-3a6e04c38e02
>
> Best regards,
> --
> Louis Chauvet <louis.chauvet@bootlin.com>
>
On 19/11/24 10:56, Louis Chauvet wrote:
> On 19/11/24 - 14:34, Louis Chauvet wrote:
>> VKMS currently supports only one CRTC, so it make no sense to have this
>> index configurable. To avoid issues, replace this hardcoded index by
>> drm_crtc_mask when applicable.
>>
>> There is no need to manually set a crtc mask on primary and cursor plane
>> as it is automatically set by drmm_crtc_alloc_with_planes.
>>
>> In addition, this will remove the use of an uninitialized structure in
>> vkms_add_overlay_plane. This currently works by chance because two things:
>> - vkms_plane_init always set a possible_crtcs value, so the problematic
>> branch is never used;
>> - drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
>> always have this id.
>>
>> Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
>
> Hi Maíra, José,
>
> You told me "LGTM" for the v2, but without leaving a Acked/Reviewed-by,
> should I add them? Or maybe you prefer to formally send them now?
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Best Regards,
- Maíra
>
> Thanks,
> Louis Chauvet
>
>> ---
>> Changes in v3:
>> - Rebased on drm-misc-next
>> - Link to v2: https://lore.kernel.org/r/20241010-vkms-remove-index-v2-1-6b8d6cfd5a15@bootlin.com
>>
>> Changes in v2:
>> - Applied comments from José
>> - Link to v1: https://lore.kernel.org/r/20240906-vkms-remove-index-v1-1-3cfedd8ccb2f@bootlin.com
>> ---
>> drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
>> drivers/gpu/drm/vkms/vkms_drv.h | 8 ++-----
>> drivers/gpu/drm/vkms/vkms_output.c | 49 +++++++++++++-------------------------
>> drivers/gpu/drm/vkms/vkms_plane.c | 4 ++--
>> 4 files changed, 21 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
>> index bab13943d8e0085bed85092d7bc8727d834768a9..e4ae69d9ef871c9ce436ad0bd8c6551d8fe7f55c 100644
>> --- a/drivers/gpu/drm/vkms/vkms_drv.c
>> +++ b/drivers/gpu/drm/vkms/vkms_drv.c
>> @@ -174,7 +174,7 @@ static int vkms_modeset_init(struct vkms_device *vkmsdev)
>> dev->mode_config.preferred_depth = 0;
>> dev->mode_config.helper_private = &vkms_mode_config_helpers;
>>
>> - return vkms_output_init(vkmsdev, 0);
>> + return vkms_output_init(vkmsdev);
>> }
>>
>> static int vkms_create(struct vkms_config *config)
>> diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
>> index 672fe191e239c03e7358d43eb19215361417a781..036101ee4ea1cb0a335cd2ea78a8ca9da87fbe93 100644
>> --- a/drivers/gpu/drm/vkms/vkms_drv.h
>> +++ b/drivers/gpu/drm/vkms/vkms_drv.h
>> @@ -212,21 +212,17 @@ int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
>> * vkms_output_init() - Initialize all sub-components needed for a VKMS device.
>> *
>> * @vkmsdev: VKMS device to initialize
>> - * @index: CRTC which can be attached to the planes. The caller must ensure that
>> - * @index is positive and less or equals to 31.
>> */
>> -int vkms_output_init(struct vkms_device *vkmsdev, int index);
>> +int vkms_output_init(struct vkms_device *vkmsdev);
>>
>> /**
>> * vkms_plane_init() - Initialize a plane
>> *
>> * @vkmsdev: VKMS device containing the plane
>> * @type: type of plane to initialize
>> - * @index: CRTC which can be attached to the plane. The caller must ensure that
>> - * @index is positive and less or equals to 31.
>> */
>> struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
>> - enum drm_plane_type type, int index);
>> + enum drm_plane_type type);
>>
>> /* CRC Support */
>> const char *const *vkms_get_crc_sources(struct drm_crtc *crtc,
>> diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
>> index 25a99fde126c7402941954015287ab0887484139..8f4bd5aef087b459d37d0cbbf90fe0145090917a 100644
>> --- a/drivers/gpu/drm/vkms/vkms_output.c
>> +++ b/drivers/gpu/drm/vkms/vkms_output.c
>> @@ -32,29 +32,14 @@ static const struct drm_connector_helper_funcs vkms_conn_helper_funcs = {
>> .get_modes = vkms_conn_get_modes,
>> };
>>
>> -static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
>> - struct drm_crtc *crtc)
>> -{
>> - struct vkms_plane *overlay;
>> -
>> - overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
>> - if (IS_ERR(overlay))
>> - return PTR_ERR(overlay);
>> -
>> - if (!overlay->base.possible_crtcs)
>> - overlay->base.possible_crtcs = drm_crtc_mask(crtc);
>> -
>> - return 0;
>> -}
>> -
>> -int vkms_output_init(struct vkms_device *vkmsdev, int index)
>> +int vkms_output_init(struct vkms_device *vkmsdev)
>> {
>> struct vkms_output *output = &vkmsdev->output;
>> struct drm_device *dev = &vkmsdev->drm;
>> struct drm_connector *connector = &output->connector;
>> struct drm_encoder *encoder = &output->encoder;
>> struct drm_crtc *crtc = &output->crtc;
>> - struct vkms_plane *primary, *cursor = NULL;
>> + struct vkms_plane *primary, *overlay, *cursor = NULL;
>> int ret;
>> int writeback;
>> unsigned int n;
>> @@ -65,29 +50,31 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
>> * The overlay and cursor planes are not mandatory, but can be used to perform complex
>> * composition.
>> */
>> - primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
>> + primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY);
>> if (IS_ERR(primary))
>> return PTR_ERR(primary);
>>
>> - if (vkmsdev->config->overlay) {
>> - for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
>> - ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
>> - if (ret)
>> - return ret;
>> - }
>> - }
>> -
>> if (vkmsdev->config->cursor) {
>> - cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
>> + cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR);
>> if (IS_ERR(cursor))
>> return PTR_ERR(cursor);
>> }
>>
>> - /* [1]: Allocation of a CRTC, its index will be BIT(0) = 1 */
>> ret = vkms_crtc_init(dev, crtc, &primary->base, &cursor->base);
>> if (ret)
>> return ret;
>>
>> + if (vkmsdev->config->overlay) {
>> + for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
>> + overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY);
>> + if (IS_ERR(overlay)) {
>> + DRM_DEV_ERROR(dev->dev, "Failed to init vkms plane\n");
>> + return PTR_ERR(overlay);
>> + }
>> + overlay->base.possible_crtcs = drm_crtc_mask(crtc);
>> + }
>> + }
>> +
>> ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
>> DRM_MODE_CONNECTOR_VIRTUAL);
>> if (ret) {
>> @@ -103,11 +90,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
>> DRM_ERROR("Failed to init encoder\n");
>> goto err_encoder;
>> }
>> - /*
>> - * This is a hardcoded value to select crtc for the encoder.
>> - * BIT(0) here designate the first registered CRTC, the one allocated in [1]
>> - */
>> - encoder->possible_crtcs = BIT(0);
>> + encoder->possible_crtcs = drm_crtc_mask(crtc);
>>
>> ret = drm_connector_attach_encoder(connector, encoder);
>> if (ret) {
>> diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
>> index e5c625ab8e3e06cb95f468c59bc3b06ef85eab6f..ad137c9a75f5e9ee3bb62e7bb2c5e3684a6ecbb6 100644
>> --- a/drivers/gpu/drm/vkms/vkms_plane.c
>> +++ b/drivers/gpu/drm/vkms/vkms_plane.c
>> @@ -198,12 +198,12 @@ static const struct drm_plane_helper_funcs vkms_plane_helper_funcs = {
>> };
>>
>> struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
>> - enum drm_plane_type type, int index)
>> + enum drm_plane_type type)
>> {
>> struct drm_device *dev = &vkmsdev->drm;
>> struct vkms_plane *plane;
>>
>> - plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 << index,
>> + plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 0,
>> &vkms_plane_funcs,
>> vkms_formats, ARRAY_SIZE(vkms_formats),
>> NULL, type, NULL);
>>
>> ---
>> base-commit: 7d2faa8dbb7055a115fe0cd6068d7090094a573d
>> change-id: 20240906-vkms-remove-index-3a6e04c38e02
>>
>> Best regards,
>> --
>> Louis Chauvet <louis.chauvet@bootlin.com>
>>
On Tue, Nov 19, 2024 at 02:56:57PM +0100, Louis Chauvet wrote:
> On 19/11/24 - 14:34, Louis Chauvet wrote:
> > VKMS currently supports only one CRTC, so it make no sense to have this
> > index configurable. To avoid issues, replace this hardcoded index by
> > drm_crtc_mask when applicable.
> >
> > There is no need to manually set a crtc mask on primary and cursor plane
> > as it is automatically set by drmm_crtc_alloc_with_planes.
> >
> > In addition, this will remove the use of an uninitialized structure in
> > vkms_add_overlay_plane. This currently works by chance because two things:
> > - vkms_plane_init always set a possible_crtcs value, so the problematic
> > branch is never used;
> > - drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
> > always have this id.
> >
> > Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
>
> Hi Maíra, José,
>
> You told me "LGTM" for the v2, but without leaving a Acked/Reviewed-by,
> should I add them? Or maybe you prefer to formally send them now?
Yes, feel free to add:
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Thanks for rebasing the patch and fixing the conflict!
Jose
> Thanks,
> Louis Chauvet
>
> > ---
> > Changes in v3:
> > - Rebased on drm-misc-next
> > - Link to v2: https://lore.kernel.org/r/20241010-vkms-remove-index-v2-1-6b8d6cfd5a15@bootlin.com
> >
> > Changes in v2:
> > - Applied comments from José
> > - Link to v1: https://lore.kernel.org/r/20240906-vkms-remove-index-v1-1-3cfedd8ccb2f@bootlin.com
> > ---
> > drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
> > drivers/gpu/drm/vkms/vkms_drv.h | 8 ++-----
> > drivers/gpu/drm/vkms/vkms_output.c | 49 +++++++++++++-------------------------
> > drivers/gpu/drm/vkms/vkms_plane.c | 4 ++--
> > 4 files changed, 21 insertions(+), 42 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> > index bab13943d8e0085bed85092d7bc8727d834768a9..e4ae69d9ef871c9ce436ad0bd8c6551d8fe7f55c 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.c
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> > @@ -174,7 +174,7 @@ static int vkms_modeset_init(struct vkms_device *vkmsdev)
> > dev->mode_config.preferred_depth = 0;
> > dev->mode_config.helper_private = &vkms_mode_config_helpers;
> >
> > - return vkms_output_init(vkmsdev, 0);
> > + return vkms_output_init(vkmsdev);
> > }
> >
> > static int vkms_create(struct vkms_config *config)
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> > index 672fe191e239c03e7358d43eb19215361417a781..036101ee4ea1cb0a335cd2ea78a8ca9da87fbe93 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.h
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> > @@ -212,21 +212,17 @@ int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> > * vkms_output_init() - Initialize all sub-components needed for a VKMS device.
> > *
> > * @vkmsdev: VKMS device to initialize
> > - * @index: CRTC which can be attached to the planes. The caller must ensure that
> > - * @index is positive and less or equals to 31.
> > */
> > -int vkms_output_init(struct vkms_device *vkmsdev, int index);
> > +int vkms_output_init(struct vkms_device *vkmsdev);
> >
> > /**
> > * vkms_plane_init() - Initialize a plane
> > *
> > * @vkmsdev: VKMS device containing the plane
> > * @type: type of plane to initialize
> > - * @index: CRTC which can be attached to the plane. The caller must ensure that
> > - * @index is positive and less or equals to 31.
> > */
> > struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> > - enum drm_plane_type type, int index);
> > + enum drm_plane_type type);
> >
> > /* CRC Support */
> > const char *const *vkms_get_crc_sources(struct drm_crtc *crtc,
> > diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
> > index 25a99fde126c7402941954015287ab0887484139..8f4bd5aef087b459d37d0cbbf90fe0145090917a 100644
> > --- a/drivers/gpu/drm/vkms/vkms_output.c
> > +++ b/drivers/gpu/drm/vkms/vkms_output.c
> > @@ -32,29 +32,14 @@ static const struct drm_connector_helper_funcs vkms_conn_helper_funcs = {
> > .get_modes = vkms_conn_get_modes,
> > };
> >
> > -static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
> > - struct drm_crtc *crtc)
> > -{
> > - struct vkms_plane *overlay;
> > -
> > - overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
> > - if (IS_ERR(overlay))
> > - return PTR_ERR(overlay);
> > -
> > - if (!overlay->base.possible_crtcs)
> > - overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> > -
> > - return 0;
> > -}
> > -
> > -int vkms_output_init(struct vkms_device *vkmsdev, int index)
> > +int vkms_output_init(struct vkms_device *vkmsdev)
> > {
> > struct vkms_output *output = &vkmsdev->output;
> > struct drm_device *dev = &vkmsdev->drm;
> > struct drm_connector *connector = &output->connector;
> > struct drm_encoder *encoder = &output->encoder;
> > struct drm_crtc *crtc = &output->crtc;
> > - struct vkms_plane *primary, *cursor = NULL;
> > + struct vkms_plane *primary, *overlay, *cursor = NULL;
> > int ret;
> > int writeback;
> > unsigned int n;
> > @@ -65,29 +50,31 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> > * The overlay and cursor planes are not mandatory, but can be used to perform complex
> > * composition.
> > */
> > - primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
> > + primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY);
> > if (IS_ERR(primary))
> > return PTR_ERR(primary);
> >
> > - if (vkmsdev->config->overlay) {
> > - for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> > - ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
> > - if (ret)
> > - return ret;
> > - }
> > - }
> > -
> > if (vkmsdev->config->cursor) {
> > - cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
> > + cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR);
> > if (IS_ERR(cursor))
> > return PTR_ERR(cursor);
> > }
> >
> > - /* [1]: Allocation of a CRTC, its index will be BIT(0) = 1 */
> > ret = vkms_crtc_init(dev, crtc, &primary->base, &cursor->base);
> > if (ret)
> > return ret;
> >
> > + if (vkmsdev->config->overlay) {
> > + for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> > + overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY);
> > + if (IS_ERR(overlay)) {
> > + DRM_DEV_ERROR(dev->dev, "Failed to init vkms plane\n");
> > + return PTR_ERR(overlay);
> > + }
> > + overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> > + }
> > + }
> > +
> > ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
> > DRM_MODE_CONNECTOR_VIRTUAL);
> > if (ret) {
> > @@ -103,11 +90,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> > DRM_ERROR("Failed to init encoder\n");
> > goto err_encoder;
> > }
> > - /*
> > - * This is a hardcoded value to select crtc for the encoder.
> > - * BIT(0) here designate the first registered CRTC, the one allocated in [1]
> > - */
> > - encoder->possible_crtcs = BIT(0);
> > + encoder->possible_crtcs = drm_crtc_mask(crtc);
> >
> > ret = drm_connector_attach_encoder(connector, encoder);
> > if (ret) {
> > diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
> > index e5c625ab8e3e06cb95f468c59bc3b06ef85eab6f..ad137c9a75f5e9ee3bb62e7bb2c5e3684a6ecbb6 100644
> > --- a/drivers/gpu/drm/vkms/vkms_plane.c
> > +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> > @@ -198,12 +198,12 @@ static const struct drm_plane_helper_funcs vkms_plane_helper_funcs = {
> > };
> >
> > struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> > - enum drm_plane_type type, int index)
> > + enum drm_plane_type type)
> > {
> > struct drm_device *dev = &vkmsdev->drm;
> > struct vkms_plane *plane;
> >
> > - plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 << index,
> > + plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 0,
> > &vkms_plane_funcs,
> > vkms_formats, ARRAY_SIZE(vkms_formats),
> > NULL, type, NULL);
> >
> > ---
> > base-commit: 7d2faa8dbb7055a115fe0cd6068d7090094a573d
> > change-id: 20240906-vkms-remove-index-3a6e04c38e02
> >
> > Best regards,
> > --
> > Louis Chauvet <louis.chauvet@bootlin.com>
> >
© 2016 - 2026 Red Hat, Inc.