From: Leonard Göhrs <l.goehrs@pengutronix.de>

Some of the userspace software and tests depend on the can/i2c/spi
devices having the same name on every boot. This may not always be the
case based on e.g. parallel probe order.

Assign static device numbers to all can/i2c/spi devices.

Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
index abe4c7fe7678f2801683e0995dadbfecce434e81..a97708423ec8f2ee2c471b07ff9dfac19e605b3b 100644
--- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
@@ -16,12 +16,20 @@
 
 / {
 	aliases {
+		can0 = &m_can1;
+		can1 = &m_can2;
 		ethernet0 = &ethernet0;
 		ethernet1 = &port_uplink;
 		ethernet2 = &port_dut;
+		i2c0 = &i2c1;
+		i2c1 = &i2c4;
+		i2c2 = &i2c5;
 		mmc1 = &sdmmc2;
 		serial0 = &uart4;
 		serial1 = &usart3;
+		spi0 = &spi2;
+		spi1 = &spi4;
+		spi2 = &spi5;
 	};
 
 	chosen {

-- 
2.45.2