1. Patchew
  2. linux
  3. [PATCH 0/2] arm64: dts: ti: introduce basic support for the AM62L
  4. View patch

[PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file

Bryan Brattlof posted 2 patches 1 year, 2 months ago
There is a newer version of this series
[PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file
Posted by Bryan Brattlof 1 year, 2 months ago 
From: Vignesh Raghavendra <vigneshr@ti.com>

Add the initial board file for the AM62L3's Evaluation Module.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 54 ++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
new file mode 100644
index 0000000000000..2d59389765cab
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-only or MIT
+/*
+ * Device Tree file for the AM62L3 Evaluation Module
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Technical Reference Manual: https://www.ti.com/lit/ug/sprujb4/sprujb4.pdf
+ */
+
+/dts-v1/;
+
+#include "k3-am62l3.dtsi"
+
+/ {
+	compatible = "ti,am62l3-evm", "ti,am62l3";
+	model = "Texas Instruments AM62L3 Evaluation Module";
+
+	aliases {
+		serial2 = &main_uart0;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	memory@80000000 {
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		device_type = "memory";
+		bootph-all;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+};
+
+&pmx0 {
+	main_uart0_pins_default: main_uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x01d4, PIN_INPUT, 1)	  /* (D7)  UART0_RXD */
+			AM62LX_IOPAD(0x01d8, PIN_OUTPUT, 1)	  /* (A6)  UART0_TXD */
+		>;
+		bootph-all;
+	};
+};
+
+&main_uart0 {
+	current-speed = <115200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+	bootph-all;
+};

-- 
2.46.0
Re: [PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file
Posted by Wadim Egorov 1 year, 2 months ago 

Am 18.11.24 um 06:34 schrieb Bryan Brattlof:
> From: Vignesh Raghavendra <vigneshr@ti.com>
> 
> Add the initial board file for the AM62L3's Evaluation Module.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> Signed-off-by: Bryan Brattlof <bb@ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 54 ++++++++++++++++++++++++++++++++
>   1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> new file mode 100644
> index 0000000000000..2d59389765cab
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> @@ -0,0 +1,54 @@
> +// SPDX-License-Identifier: GPL-2.0-only or MIT
> +/*
> + * Device Tree file for the AM62L3 Evaluation Module
> + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
> + *
> + * Technical Reference Manual: https://www.ti.com/lit/ug/sprujb4/sprujb4.pdf
> + */
> +
> +/dts-v1/;
> +
> +#include "k3-am62l3.dtsi"
> +
> +/ {
> +	compatible = "ti,am62l3-evm", "ti,am62l3";
> +	model = "Texas Instruments AM62L3 Evaluation Module";
> +
> +	aliases {
> +		serial2 = &main_uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = &main_uart0;
> +	};
> +
> +	memory@80000000 {
> +		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
> +		device_type = "memory";
> +		bootph-all;
> +	};
> +
> +	reserved-memory {
> +		ranges;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +	};
> +};
> +
> +&pmx0 {
> +	main_uart0_pins_default: main_uart0-default-pins {
> +		pinctrl-single,pins = <
> +			AM62LX_IOPAD(0x01d4, PIN_INPUT, 1)	  /* (D7)  UART0_RXD */
> +			AM62LX_IOPAD(0x01d8, PIN_OUTPUT, 1)	  /* (A6)  UART0_TXD */

Looking at other IOPAD definitions it seems that for any mux mode which 
is not 0, the comment typically includes the ball name.


> +		>;
> +		bootph-all;
> +	};
> +};
> +
> +&main_uart0 {
> +	current-speed = <115200>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_uart0_pins_default>;
> +	status = "okay";
> +	bootph-all;
> +};
>
Re: [PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file
Posted by Bryan Brattlof 1 year, 2 months ago 
On November 19, 2024 thus sayeth Wadim Egorov:
> 
> 
> Am 18.11.24 um 06:34 schrieb Bryan Brattlof:
> > From: Vignesh Raghavendra <vigneshr@ti.com>
> > 
> > Add the initial board file for the AM62L3's Evaluation Module.
> > 
> > Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> > Signed-off-by: Bryan Brattlof <bb@ti.com>
> > ---
> >   arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 54 ++++++++++++++++++++++++++++++++
> >   1 file changed, 54 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> > new file mode 100644
> > index 0000000000000..2d59389765cab
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> > @@ -0,0 +1,54 @@
> > +// SPDX-License-Identifier: GPL-2.0-only or MIT
> > +/*
> > + * Device Tree file for the AM62L3 Evaluation Module
> > + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
> > + *
> > + * Technical Reference Manual: https://www.ti.com/lit/ug/sprujb4/sprujb4.pdf
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "k3-am62l3.dtsi"
> > +
> > +/ {
> > +	compatible = "ti,am62l3-evm", "ti,am62l3";
> > +	model = "Texas Instruments AM62L3 Evaluation Module";
> > +
> > +	aliases {
> > +		serial2 = &main_uart0;
> > +	};
> > +
> > +	chosen {
> > +		stdout-path = &main_uart0;
> > +	};
> > +
> > +	memory@80000000 {
> > +		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
> > +		device_type = "memory";
> > +		bootph-all;
> > +	};
> > +
> > +	reserved-memory {
> > +		ranges;
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +	};
> > +};
> > +
> > +&pmx0 {
> > +	main_uart0_pins_default: main_uart0-default-pins {
> > +		pinctrl-single,pins = <
> > +			AM62LX_IOPAD(0x01d4, PIN_INPUT, 1)	  /* (D7)  UART0_RXD */
> > +			AM62LX_IOPAD(0x01d8, PIN_OUTPUT, 1)	  /* (A6)  UART0_TXD */
> 
> Looking at other IOPAD definitions it seems that for any mux mode which is
> not 0, the comment typically includes the ball name.
> 

Good point. All add those for the next round.

~Bryan
Re: [PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file
Posted by Andrew Davis 1 year, 2 months ago 
On 11/17/24 11:34 PM, Bryan Brattlof wrote:
> From: Vignesh Raghavendra <vigneshr@ti.com>
> 
> Add the initial board file for the AM62L3's Evaluation Module.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> Signed-off-by: Bryan Brattlof <bb@ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 54 ++++++++++++++++++++++++++++++++
>   1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> new file mode 100644
> index 0000000000000..2d59389765cab
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> @@ -0,0 +1,54 @@
> +// SPDX-License-Identifier: GPL-2.0-only or MIT
> +/*
> + * Device Tree file for the AM62L3 Evaluation Module
> + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
> + *
> + * Technical Reference Manual: https://www.ti.com/lit/ug/sprujb4/sprujb4.pdf
> + */
> +
> +/dts-v1/;
> +
> +#include "k3-am62l3.dtsi"
> +
> +/ {
> +	compatible = "ti,am62l3-evm", "ti,am62l3";
> +	model = "Texas Instruments AM62L3 Evaluation Module";
> +
> +	aliases {
> +		serial2 = &main_uart0;

We usually have WKUP and MCU UARTs as serial0 and serial1, we don't
have that many, so we would never have serial1, only 0 and 2. Might
be time we drop this odd numbering convention, at least for AM62L
class parts..

> +	};
> +
> +	chosen {
> +		stdout-path = &main_uart0;
> +	};
> +
> +	memory@80000000 {
> +		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
> +		device_type = "memory";
> +		bootph-all;
> +	};
> +
> +	reserved-memory {

Not needed until you have something to reserve.

> +		ranges;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +	};
> +};
> +
> +&pmx0 {
> +	main_uart0_pins_default: main_uart0-default-pins {
> +		pinctrl-single,pins = <
> +			AM62LX_IOPAD(0x01d4, PIN_INPUT, 1)	  /* (D7)  UART0_RXD */
> +			AM62LX_IOPAD(0x01d8, PIN_OUTPUT, 1)	  /* (A6)  UART0_TXD */
> +		>;
> +		bootph-all;
> +	};
> +};
> +
> +&main_uart0 {
> +	current-speed = <115200>;

current-speed is only for UARTs that can't detect their current speed,
our UART and driver can, so this line isn't needed.

Andrew

> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_uart0_pins_default>;
> +	status = "okay";
> +	bootph-all;
> +};
>
Re: [PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file
Posted by Bryan Brattlof 1 year, 2 months ago 
On November 18, 2024 thus sayeth Andrew Davis:
> On 11/17/24 11:34 PM, Bryan Brattlof wrote:
> > From: Vignesh Raghavendra <vigneshr@ti.com>
> > 
> > Add the initial board file for the AM62L3's Evaluation Module.
> > 
> > Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> > Signed-off-by: Bryan Brattlof <bb@ti.com>
> > ---
> >   arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 54 ++++++++++++++++++++++++++++++++
> >   1 file changed, 54 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> > new file mode 100644
> > index 0000000000000..2d59389765cab
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> > @@ -0,0 +1,54 @@
> > +// SPDX-License-Identifier: GPL-2.0-only or MIT
> > +/*
> > + * Device Tree file for the AM62L3 Evaluation Module
> > + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
> > + *
> > + * Technical Reference Manual: https://www.ti.com/lit/ug/sprujb4/sprujb4.pdf
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "k3-am62l3.dtsi"
> > +
> > +/ {
> > +	compatible = "ti,am62l3-evm", "ti,am62l3";
> > +	model = "Texas Instruments AM62L3 Evaluation Module";
> > +
> > +	aliases {
> > +		serial2 = &main_uart0;
> 
> We usually have WKUP and MCU UARTs as serial0 and serial1, we don't
> have that many, so we would never have serial1, only 0 and 2. Might
> be time we drop this odd numbering convention, at least for AM62L
> class parts..
> 

Good point. I'll see what I can come up with

> > +	};
> > +
> > +	chosen {
> > +		stdout-path = &main_uart0;
> > +	};
> > +
> > +	memory@80000000 {
> > +		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
> > +		device_type = "memory";
> > +		bootph-all;
> > +	};
> > +
> > +	reserved-memory {
> 
> Not needed until you have something to reserve.
> 

Ah I agree. I'll drop this next time.

> > +		ranges;
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +	};
> > +};
> > +
> > +&pmx0 {
> > +	main_uart0_pins_default: main_uart0-default-pins {
> > +		pinctrl-single,pins = <
> > +			AM62LX_IOPAD(0x01d4, PIN_INPUT, 1)	  /* (D7)  UART0_RXD */
> > +			AM62LX_IOPAD(0x01d8, PIN_OUTPUT, 1)	  /* (A6)  UART0_TXD */
> > +		>;
> > +		bootph-all;
> > +	};
> > +};
> > +
> > +&main_uart0 {
> > +	current-speed = <115200>;
> 
> current-speed is only for UARTs that can't detect their current speed,
> our UART and driver can, so this line isn't needed.
> 

Nice! I'll drop this property as well

~Bryan

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.