The f81604_handle_can_bus_errors() function only incremented the receive
error counter and never the transmit error counter, even if the ECC_DIR
flag reported that an error had occurred during transmission. The patch
increments the receive/transmit error counter based on the value of the
ECC_DIR flag.

Fixes: 88da17436973 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

 drivers/net/can/usb/f81604.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/usb/f81604.c b/drivers/net/can/usb/f81604.c
index bc0c8903fe77..8463e00517c9 100644
--- a/drivers/net/can/usb/f81604.c
+++ b/drivers/net/can/usb/f81604.c
@@ -526,7 +526,6 @@ static void f81604_handle_can_bus_errors(struct f81604_port_priv *priv,
 		netdev_dbg(netdev, "bus error interrupt\n");
 
 		priv->can.can_stats.bus_error++;
-		stats->rx_errors++;
 
 		if (skb) {
 			cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
@@ -550,8 +549,12 @@ static void f81604_handle_can_bus_errors(struct f81604_port_priv *priv,
 			cf->data[3] = data->ecc & F81604_SJA1000_ECC_SEG;
 
 			/* Error occurred during transmission? */
-			if ((data->ecc & F81604_SJA1000_ECC_DIR) == 0)
+			if ((data->ecc & F81604_SJA1000_ECC_DIR) == 0) {
 				cf->data[2] |= CAN_ERR_PROT_TX;
+				stats->tx_errors++;
+			} else {
+				stats->rx_errors++;
+			}
 		}
 
 		set_bit(F81604_CLEAR_ECC, &priv->clear_flags);
-- 
2.43.0