The sun4i_can_err() function only incremented the receive error counter
and never the transmit error counter, even if the STA_ERR_DIR flag
reported that an error had occurred during transmission. The patch
increments the receive/transmit error counter based on the value of the
STA_ERR_DIR flag.

Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

 drivers/net/can/sun4i_can.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c
index 360158c295d3..40939141749d 100644
--- a/drivers/net/can/sun4i_can.c
+++ b/drivers/net/can/sun4i_can.c
@@ -579,7 +579,6 @@ static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status)
 		/* bus error interrupt */
 		netdev_dbg(dev, "bus error interrupt\n");
 		priv->can.can_stats.bus_error++;
-		stats->rx_errors++;
 
 		if (likely(skb)) {
 			ecc = readl(priv->base + SUN4I_REG_STA_ADDR);
@@ -602,8 +601,12 @@ static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status)
 				break;
 			}
 			/* error occurred during transmission? */
-			if ((ecc & SUN4I_STA_ERR_DIR) == 0)
+			if ((ecc & SUN4I_STA_ERR_DIR) == 0) {
 				cf->data[2] |= CAN_ERR_PROT_TX;
+				stats->tx_errors++;
+			} else {
+				stats->rx_errors++;
+			}
 		}
 	}
 	if (isrc & SUN4I_INT_ERR_PASSIVE) {
-- 
2.43.0