The sja1000_err() function only incremented the receive error counter
and never the transmit error counter, even if the ECC_DIR flag reported
that an error had occurred during transmission. The patch increments the
receive/transmit error counter based on the value of the ECC_DIR flag.

Fixes: 429da1cc841b ("can: Driver for the SJA1000 CAN controller")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

 drivers/net/can/sja1000/sja1000.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index ddb3247948ad..706ee8f6b7db 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -460,7 +460,6 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 	if (isrc & IRQ_BEI) {
 		/* bus error interrupt */
 		priv->can.can_stats.bus_error++;
-		stats->rx_errors++;
 
 		ecc = priv->read_reg(priv, SJA1000_ECC);
 
@@ -485,8 +484,12 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 		cf->data[3] = ecc & ECC_SEG;
 
 		/* Error occurred during transmission? */
-		if ((ecc & ECC_DIR) == 0)
+		if ((ecc & ECC_DIR) == 0) {
 			cf->data[2] |= CAN_ERR_PROT_TX;
+			stats->tx_errors++;
+		} else {
+			stats->rx_errors++;
+		}
 	}
 	if (isrc & IRQ_EPI) {
 		/* error passive interrupt */
-- 
2.43.0