Introduce support for Enclustra's Mercury SA1 SoM based on Intel Cyclone5
technology as a .dtsi file.

Signed-off-by: Andreas Buerkler <andreas.buerkler@enclustra.com>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 .../socfpga/socfpga_cyclone5_mercury_sa1.dtsi | 143 ++++++++++++++++++
 1 file changed, 143 insertions(+)
 create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi

diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi
new file mode 100644
index 000000000..2041088b7
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	/* Adjusted the i2c labels to use generic base-board dtsi files for
+	 * Enclustra Arria10 and Cyclone5 SoMs.
+	 *
+	 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
+	 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
+	 * fragments. Thus define generic labels here to match the correct i2c
+	 * bus in a generic base-board .dtsi file.
+	 */
+	soc {
+		i2c_encl: i2c@ffc04000 {
+		};
+		i2c_encl_fpga: i2c@ffc05000 {
+		};
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&osc1 {
+	clock-frequency = <50000000>;
+};
+
+&i2c_encl {
+	i2c-sda-hold-time-ns = <300>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	isl12020: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+&i2c_encl_fpga {
+	i2c-sda-hold-time-ns = <300>;
+	status = "disabled";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+};
+
+&mmc0 {
+	status = "okay";
+	/delete-property/ cap-mmc-highspeed;
+	/delete-property/ cap-sd-highspeed;
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <10000000>;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@raw {
+			label = "Flash Raw";
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	/delete-property/ mac-address;
+	phy-mode = "rgmii";
+	phy-handle = <&phy3>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+
+			/* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
+			rxc-skew-ps = <1680>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+			rxdv-skew-ps = <420>;
+
+			/* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
+			txc-skew-ps = <1860>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
-- 
2.39.2