Remove the binding for the generic Mercury+ AA1 on PE1 carrier board.

The removed Mercury+ AA1 on PE1 carrier board is just a particular
setup case, which is actually replaced by the set of generic Mercury+
AA1 combinations patch.

In other words a combination of a Mercury+ AA1 on a PE1 base board,
with boot mode SD card is already covered by the generic AA1
combinations. There is no further reason to keep this particular case
now in a redundantly. Thus the redundant DT setup is removed.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/arm/altera.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
index 51f10ff8e..1561f0164 100644
--- a/Documentation/devicetree/bindings/arm/altera.yaml
+++ b/Documentation/devicetree/bindings/arm/altera.yaml
@@ -31,7 +31,6 @@ properties:
       - description: Mercury+ AA1 boards
         items:
           - enum:
-              - enclustra,mercury-pe1
               - enclustra,mercury-aa1-pe1
               - enclustra,mercury-aa1-pe3
               - enclustra,mercury-aa1-st1
-- 
2.39.2