[v2] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

[PATCH v2 0/1] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

E Shattow posted 1 patch 5 days, 22 hours ago

Diff against v3 v4
Download series mbox

There is a newer version of this series

.../boot/dts/starfive/jh7110-milkv-mars.dts    | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)

Expand all Fold all

[PATCH v2 0/1] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

Posted by E Shattow 5 days, 22 hours ago

Enable host mode JH7110 on-chip USB for Milk-V Mars by setting host mode
and connect vbus pinctrl.

This functionality depends on:

1. commit e10c52e7e064038d9bd67b20bf4ce92077d7d84e
"phy: starfive: jh7110-usb: Fix link configuration to controller"

2. Setting the USB over-current register to disable. This is done at
bootloader phase, for example U-Boot:
https://patchwork.ozlabs.org/project/uboot/patch/20241012031328.4268-6-minda.chen@starfivetech.com/

If the over-current register is not prepared for us then the result is no
change in functional outcome with this patch applied; there is an error
visible to the user and this additional usb configuration fails (same as
it is now). The existing three VL805 connected USB ports via PCIe on 
Milk-V Mars are not affected.

Changes since v1:
 - series name (was "[PATCH] riscv: dts: starfive: jh7110-milkv-mars: set host mode and vbus pin for on-chip USB 2.0")
 - adjust pin label to obey dtschema
 - use cover letter

E Shattow (1):
  riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

 .../boot/dts/starfive/jh7110-milkv-mars.dts    | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

-- 
2.45.2