1. Patchew
  2. linux
  3. [PATCH v2 0/5] arm64: qcom: Add support for QCS9075 boards
  4. View patch

[PATCH v2 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3

Wasim Nazir posted 5 patches 6 days, 12 hours ago
There is a newer version of this series
[PATCH v2 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
Posted by Wasim Nazir 6 days, 12 hours ago 
Add device tree support for QCS9075 Ride & Ride-r3 boards.
QCS9075 Ride & Ride-r3 are similar to QCS9100 Ride and Ride-r3
boards but without safety monitoring feature of SAfety-IsLand
subsystem.

Difference between ride and ride-r3 is the ethernet phy.
Ride uses 1G ethernet phy while ride-r3 uses 2.5G ethernet phy.

Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile            |  2 ++
 arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts | 12 ++++++++++++
 arch/arm64/boot/dts/qcom/qcs9075-ride.dts    | 12 ++++++++++++
 3 files changed, 26 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
 create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5d9847119f2e..91c811aca2ca 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -116,6 +116,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-rb8.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-ride-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
new file mode 100644
index 000000000000..a04c8d1fa258
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "sa8775p-ride-r3.dts"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS9075 Ride Rev3";
+	compatible = "qcom,qcs9075-ride-r3", "qcom,qcs9075", "qcom,sa8775p";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts
new file mode 100644
index 000000000000..9ffab74fb1a8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "sa8775p-ride.dts"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS9075 Ride";
+	compatible = "qcom,qcs9075-ride", "qcom,qcs9075", "qcom,sa8775p";
+};
--
2.47.0
Re: [PATCH v2 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
Posted by Dmitry Baryshkov 6 days, 11 hours ago 
On Sat, Nov 16, 2024 at 04:21:52AM +0530, Wasim Nazir wrote:
> Add device tree support for QCS9075 Ride & Ride-r3 boards.
> QCS9075 Ride & Ride-r3 are similar to QCS9100 Ride and Ride-r3
> boards but without safety monitoring feature of SAfety-IsLand
> subsystem.

Why do we need another set of DTS files? Should we expect more changes
to these DTS files?

> 
> Difference between ride and ride-r3 is the ethernet phy.
> Ride uses 1G ethernet phy while ride-r3 uses 2.5G ethernet phy.
> 
> Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile            |  2 ++
>  arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts | 12 ++++++++++++
>  arch/arm64/boot/dts/qcom/qcs9075-ride.dts    | 12 ++++++++++++
>  3 files changed, 26 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 5d9847119f2e..91c811aca2ca 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -116,6 +116,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-rb8.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-ride.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-ride-r3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
> new file mode 100644
> index 000000000000..a04c8d1fa258
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
> @@ -0,0 +1,12 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +/dts-v1/;
> +
> +#include "sa8775p-ride-r3.dts"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. QCS9075 Ride Rev3";
> +	compatible = "qcom,qcs9075-ride-r3", "qcom,qcs9075", "qcom,sa8775p";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts
> new file mode 100644
> index 000000000000..9ffab74fb1a8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts
> @@ -0,0 +1,12 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +/dts-v1/;
> +
> +#include "sa8775p-ride.dts"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. QCS9075 Ride";
> +	compatible = "qcom,qcs9075-ride", "qcom,qcs9075", "qcom,sa8775p";
> +};
> --
> 2.47.0
> 

-- 
With best wishes
Dmitry
Re: [PATCH v2 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
Posted by Wasim Nazir 2 days, 17 hours ago 
On Sat, Nov 16, 2024 at 01:54:23AM +0200, Dmitry Baryshkov wrote:
> On Sat, Nov 16, 2024 at 04:21:52AM +0530, Wasim Nazir wrote:
> > Add device tree support for QCS9075 Ride & Ride-r3 boards.
> > QCS9075 Ride & Ride-r3 are similar to QCS9100 Ride and Ride-r3
> > boards but without safety monitoring feature of SAfety-IsLand
> > subsystem.
> 
> Why do we need another set of DTS files? Should we expect more changes
> to these DTS files?

Ride/r3 based on qcs9075 and qcs9100 are 4 different boards with different
SoCs, so different file is used to represent all the 4 boards.

> 
> > 
> > Difference between ride and ride-r3 is the ethernet phy.
> > Ride uses 1G ethernet phy while ride-r3 uses 2.5G ethernet phy.
> > 
> > Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
> > ---
> >  arch/arm64/boot/dts/qcom/Makefile            |  2 ++
> >  arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts | 12 ++++++++++++
> >  arch/arm64/boot/dts/qcom/qcs9075-ride.dts    | 12 ++++++++++++
> >  3 files changed, 26 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
> >  create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride.dts
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > index 5d9847119f2e..91c811aca2ca 100644
> > --- a/arch/arm64/boot/dts/qcom/Makefile
> > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > @@ -116,6 +116,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-rb8.dtb
> > +dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-ride.dtb
> > +dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-ride-r3.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
> > diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
> > new file mode 100644
> > index 000000000000..a04c8d1fa258
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
> > @@ -0,0 +1,12 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +/*
> > + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
> > + */
> > +/dts-v1/;
> > +
> > +#include "sa8775p-ride-r3.dts"
> > +
> > +/ {
> > +	model = "Qualcomm Technologies, Inc. QCS9075 Ride Rev3";
> > +	compatible = "qcom,qcs9075-ride-r3", "qcom,qcs9075", "qcom,sa8775p";
> > +};
> > diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts
> > new file mode 100644
> > index 000000000000..9ffab74fb1a8
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts
> > @@ -0,0 +1,12 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +/*
> > + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
> > + */
> > +/dts-v1/;
> > +
> > +#include "sa8775p-ride.dts"
> > +
> > +/ {
> > +	model = "Qualcomm Technologies, Inc. QCS9075 Ride";
> > +	compatible = "qcom,qcs9075-ride", "qcom,qcs9075", "qcom,sa8775p";
> > +};
> > --
> > 2.47.0
> > 
> 
> -- 
> With best wishes
> Dmitry

Thanks & Regards,
Wasim

Patchew 2.1-devel-b67e4c2

© 2016 - 2024 Red Hat, Inc.