Remove "ti,(rx|tx)-fifo-depth" properties which are both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.

There are similar properties, but DP83867_PHYCR_FIFO_DEPTH_4_B_NIB
represents the default value so adding them is not necessary.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index e06a3b178b34..8f64d6272b1b 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -201,8 +201,6 @@ cpsw3g_phy0: ethernet-phy@0 {
 		reset-gpios = <&main_gpio0 44 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <1000>;
 		reset-deassert-us = <1000>;
-		ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 	};
@@ -230,8 +228,6 @@ icssg1_phy03: ethernet-phy@3 {
 		reset-gpios = <&main_gpio1 47 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <1000>;
 		reset-deassert-us = <1000>;
-		ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 	};
@@ -242,8 +238,6 @@ icssg1_phy0c: ethernet-phy@c {
 		reset-gpios = <&main_gpio1 51 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <1000>;
 		reset-deassert-us = <1000>;
-		ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 	};
-- 
2.45.2

Hi Rob Herring (Arm),

On Fri, 15 Nov 2024 13:33:59 -0600, Rob Herring (Arm) wrote:
> Remove "ti,(rx|tx)-fifo-depth" properties which are both unused in the
> kernel and undocumented. Most likely they are leftovers from downstream.
> 
> There are similar properties, but DP83867_PHYCR_FIFO_DEPTH_4_B_NIB
> represents the default value so adding them is not necessary.
> 
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties
      commit: 09b428453219d470475d0d6447c954bf63b95705

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D