This is the third iteration of this series which enables sensors support
for the Congatec Board Controller.
The cgbc_hwmon_compute_curr_channel() macro which computed the channel for
current sensor was removed. To get the channel id of a currrent sensor
(from the Board Controller point of view) we just have to add a constant.
Regards,
Thomas
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
Changes in v3:
- remove the cgbc_hwmon_compute_curr_channel() macro.
- Link to v2: https://lore.kernel.org/r/20241108-congatec-board-controller-hwmon-v2-0-16e337398527@bootlin.com
Changes in v2:
- hwmon: use unsigned int type instead of u8 in struct cgbc_hwmon_sensor
and struct cgbc_hwmon_data.
- hwmon: in cgbc_hwmon_probe_sensors() no need to request data for the
first sensor as the Board Controller returns data of the first sensors
with the number of sensors.
- hwmon: fix typos in comments and improve them.
- hwmon: remove dead code in cgbc_hwmon_read() and in
cgbc_hwmon_read_string() (deadcode was the 'return -ENODEV').
- hwmon: remove useless platform_set_drvdata().
- hwmon: channel id always refers to the same sensor.
- hwmon: add a enum cgbc_sensor_types.
- Link to v1: https://lore.kernel.org/r/20241104-congatec-board-controller-hwmon-v1-0-871e4cd59d8e@bootlin.com
---
Thomas Richard (2):
hwmon: Add Congatec Board Controller monitoring driver
mfd: cgbc: add a hwmon cell
MAINTAINERS | 1 +
drivers/hwmon/Kconfig | 9 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/cgbc-hwmon.c | 304 +++++++++++++++++++++++++++++++++++++++++++++
drivers/mfd/cgbc-core.c | 1 +
5 files changed, 316 insertions(+)
---
base-commit: 1ffec08567f426a1c593e038cadc61bdc38cb467
change-id: 20240809-congatec-board-controller-hwmon-e9e63d957d33
Best regards,
--
Thomas Richard <thomas.richard@bootlin.com>