Add initialization of ptp for lan887x.

Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
---
v2 -> v3 -> v4
- No changes

v1 -> v2
Fixed below review comment
  Added ptp support only if interrupts are supported as interrupts are mandatory
  for ptp.
---
 drivers/net/phy/microchip_t1.c | 40 +++++++++++++++++++++++++++++++---
 1 file changed, 37 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index 71d6050b2833..63206ae8075d 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -10,11 +10,15 @@
 #include <linux/ethtool.h>
 #include <linux/ethtool_netlink.h>
 #include <linux/bitfield.h>
+#include "microchip_ptp.h"
 
 #define PHY_ID_LAN87XX				0x0007c150
 #define PHY_ID_LAN937X				0x0007c180
 #define PHY_ID_LAN887X				0x0007c1f0
 
+#define MCHP_PTP_LTC_BASE_ADDR			0xe000
+#define MCHP_PTP_PORT_BASE_ADDR			(MCHP_PTP_LTC_BASE_ADDR + 0x800)
+
 /* External Register Control Register */
 #define LAN87XX_EXT_REG_CTL                     (0x14)
 #define LAN87XX_EXT_REG_CTL_RD_CTL              (0x1000)
@@ -229,6 +233,7 @@
 
 #define LAN887X_INT_STS				0xf000
 #define LAN887X_INT_MSK				0xf001
+#define LAN887X_INT_MSK_P1588_MOD_INT_MSK	BIT(3)
 #define LAN887X_INT_MSK_T1_PHY_INT_MSK		BIT(2)
 #define LAN887X_INT_MSK_LINK_UP_MSK		BIT(1)
 #define LAN887X_INT_MSK_LINK_DOWN_MSK		BIT(0)
@@ -319,6 +324,8 @@ struct lan887x_regwr_map {
 
 struct lan887x_priv {
 	u64 stats[ARRAY_SIZE(lan887x_hw_stats)];
+	struct mchp_ptp_clock *clock;
+	bool init_done;
 };
 
 static int lan937x_dsp_workaround(struct phy_device *phydev, u16 ereg, u8 bank)
@@ -1269,8 +1276,19 @@ static int lan887x_get_features(struct phy_device *phydev)
 
 static int lan887x_phy_init(struct phy_device *phydev)
 {
+	struct lan887x_priv *priv = phydev->priv;
 	int ret;
 
+	if (!priv->init_done && phy_interrupt_is_valid(phydev)) {
+		priv->clock = mchp_ptp_probe(phydev, MDIO_MMD_VEND1,
+					     MCHP_PTP_LTC_BASE_ADDR,
+					     MCHP_PTP_PORT_BASE_ADDR);
+		if (IS_ERR(priv->clock))
+			return PTR_ERR(priv->clock);
+
+		priv->init_done = true;
+	}
+
 	/* Clear loopback */
 	ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
 				 LAN887X_MIS_CFG_REG2,
@@ -1470,6 +1488,7 @@ static int lan887x_probe(struct phy_device *phydev)
 	if (!priv)
 		return -ENOMEM;
 
+	priv->init_done = false;
 	phydev->priv = priv;
 
 	return lan887x_phy_setup(phydev);
@@ -1518,6 +1537,7 @@ static void lan887x_get_strings(struct phy_device *phydev, u8 *data)
 
 static int lan887x_config_intr(struct phy_device *phydev)
 {
+	struct lan887x_priv *priv = phydev->priv;
 	int rc;
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
@@ -1537,12 +1557,23 @@ static int lan887x_config_intr(struct phy_device *phydev)
 
 		rc = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_INT_STS);
 	}
+	if (rc < 0)
+		return rc;
 
-	return rc < 0 ? rc : 0;
+	if (phy_is_default_hwtstamp(phydev)) {
+		return mchp_config_ptp_intr(priv->clock, LAN887X_INT_MSK,
+					    LAN887X_INT_MSK_P1588_MOD_INT_MSK,
+					    (phydev->interrupts ==
+					     PHY_INTERRUPT_ENABLED));
+	}
+
+	return 0;
 }
 
 static irqreturn_t lan887x_handle_interrupt(struct phy_device *phydev)
 {
+	struct lan887x_priv *priv = phydev->priv;
+	int rc = IRQ_NONE;
 	int irq_status;
 
 	irq_status = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_INT_STS);
@@ -1553,10 +1584,13 @@ static irqreturn_t lan887x_handle_interrupt(struct phy_device *phydev)
 
 	if (irq_status & LAN887X_MX_CHIP_TOP_LINK_MSK) {
 		phy_trigger_machine(phydev);
-		return IRQ_HANDLED;
+		rc = IRQ_HANDLED;
 	}
 
-	return IRQ_NONE;
+	if (irq_status & LAN887X_INT_MSK_P1588_MOD_INT_MSK)
+		rc = mchp_ptp_handle_interrupt(priv->clock);
+
+	return rc;
 }
 
 static int lan887x_cd_reset(struct phy_device *phydev,
-- 
2.17.1