From: Marcus Cooper <codekipper@gmail.com>
The X96Q-Pro is an STB based on the Allwinner H313 SoC with a SD
slot, 2 USB-2 ports, a 10/100M ethernet port using the SoC's
integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver,
a blue LED display, an audio video connector and an digital S/PDIF
connector.
Add the devicetree file describing the currently supported features,
namely IR, LEDs, SD card, PMIC, audio codec, SPDIF and USB.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun50i-h313-x96q-pro.dts | 176 ++++++++++++++++++
2 files changed, 177 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 00bed412ee31c..e0bcea1840c1f 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h64-remix-mini-pc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q-pro.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
new file mode 100644
index 0000000000000..4427545ea143c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "X96Q Pro";
+ compatible = "amediatech,x96q-pro", "allwinner,sun50i-h616";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC input */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ sound-spdif {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun50i-h616-spdif";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
+};
+
+&codec {
+ allwinner,audio-routing = "Line Out", "LINEOUT";
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_dldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <®_dldo1>;
+ vqmmc-supply = <®_aldo1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pc-supply = <®_dldo1>;
+ vcc-pf-supply = <®_dldo1>;
+ vcc-pg-supply = <®_aldo1>;
+ vcc-ph-supply = <®_dldo1>;
+ vcc-pi-supply = <®_dldo1>;
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp313: pmic@36 {
+ compatible = "x-powers,axp313a";
+ reg = <0x36>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&pio>;
+ interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */
+
+ vin1-supply = <®_vcc5v>;
+ vin2-supply = <®_vcc5v>;
+ vin3-supply = <®_vcc5v>;
+
+ regulators {
+ /* Supplies VCC-PLL, so needs to be always on. */
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8";
+ };
+
+ /* Supplies VCC-IO, so needs to be always on. */
+ reg_dldo1: dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3";
+ };
+
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <990000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-dram";
+ };
+ };
+ };
+};
+
+&spdif {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "host"; /* USB A type receptable */
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
--
2.47.0On Mon, 11 Nov 2024 17:25:06 +0100
codekipper@gmail.com wrote:
Hi Marcus,
many thanks for sending this!
> From: Marcus Cooper <codekipper@gmail.com>
>
> The X96Q-Pro is an STB based on the Allwinner H313 SoC with a SD
> slot, 2 USB-2 ports, a 10/100M ethernet port using the SoC's
> integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver,
> a blue LED display, an audio video connector and an digital S/PDIF
> connector.
>
> Add the devicetree file describing the currently supported features,
> namely IR, LEDs, SD card, PMIC, audio codec, SPDIF and USB.
This looks good on a first glance, but seems to miss the DVFS bits? So you
would need to #include "sun50i-h616-cpu-opp.dtsi" and specify the cpu0
power supply rail, otherwise you will be stuck at 1GHz.
Or is there any issue preventing you doing this?
Two more things below:
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> ---
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../dts/allwinner/sun50i-h313-x96q-pro.dts | 176 ++++++++++++++++++
> 2 files changed, 177 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
>
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index 00bed412ee31c..e0bcea1840c1f 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h64-remix-mini-pc.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q-pro.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
> new file mode 100644
> index 0000000000000..4427545ea143c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
> @@ -0,0 +1,176 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + */
Is this missing some copyright notice here?
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + model = "X96Q Pro";
> + compatible = "amediatech,x96q-pro", "allwinner,sun50i-h616";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + reg_vcc5v: vcc5v {
> + /* board wide 5V supply directly from the DC input */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc-5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + sound-spdif {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "sun50i-h616-spdif";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&spdif>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&spdif_out>;
> + };
> + };
> +
> + spdif_out: spdif-out {
> + #sound-dai-cells = <0>;
> + compatible = "linux,spdif-dit";
> + };
> +};
> +
> +&codec {
> + allwinner,audio-routing = "Line Out", "LINEOUT";
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci3 {
> + status = "okay";
> +};
> +
> +&ir {
> + status = "okay";
> +};
> +
> +&mmc0 {
> + vmmc-supply = <®_dldo1>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> + bus-width = <4>;
> + status = "okay";
> +};
Would it make sense to add the mmc1 node here, even if there is no driver
in Linux atm for the WiFi chip? Thanks to SDIO we wouldn't need a
compatible string, I think. This would also then allow us to describe the
connected GPIOs.
And does the box have Bluetooth?
Cheers,
Andre
> +
> +&mmc2 {
> + vmmc-supply = <®_dldo1>;
> + vqmmc-supply = <®_aldo1>;
> + bus-width = <8>;
> + non-removable;
> + cap-mmc-hw-reset;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci3 {
> + status = "okay";
> +};
> +
> +&pio {
> + vcc-pc-supply = <®_dldo1>;
> + vcc-pf-supply = <®_dldo1>;
> + vcc-pg-supply = <®_aldo1>;
> + vcc-ph-supply = <®_dldo1>;
> + vcc-pi-supply = <®_dldo1>;
> +};
> +
> +&r_i2c {
> + status = "okay";
> +
> + axp313: pmic@36 {
> + compatible = "x-powers,axp313a";
> + reg = <0x36>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + interrupt-parent = <&pio>;
> + interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */
> +
> + vin1-supply = <®_vcc5v>;
> + vin2-supply = <®_vcc5v>;
> + vin3-supply = <®_vcc5v>;
> +
> + regulators {
> + /* Supplies VCC-PLL, so needs to be always on. */
> + reg_aldo1: aldo1 {
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc1v8";
> + };
> +
> + /* Supplies VCC-IO, so needs to be always on. */
> + reg_dldo1: dldo1 {
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc3v3";
> + };
> +
> + reg_dcdc1: dcdc1 {
> + regulator-always-on;
> + regulator-min-microvolt = <810000>;
> + regulator-max-microvolt = <990000>;
> + regulator-name = "vdd-gpu-sys";
> + };
> +
> + reg_dcdc2: dcdc2 {
> + regulator-always-on;
> + regulator-min-microvolt = <810000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-name = "vdd-cpu";
> + };
> +
> + reg_dcdc3: dcdc3 {
> + regulator-always-on;
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-name = "vdd-dram";
> + };
> + };
> + };
> +};
> +
> +&spdif {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_ph_pins>;
> + status = "okay";
> +};
> +
> +&usbotg {
> + dr_mode = "host"; /* USB A type receptable */
> + status = "okay";
> +};
> +
> +&usbphy {
> + status = "okay";
> +};
d
On Mon, 11 Nov 2024 at 18:27, Andre Przywara <andre.przywara@arm.com> wrote:
>
> On Mon, 11 Nov 2024 17:25:06 +0100
> codekipper@gmail.com wrote:
>
> Hi Marcus,
>
> many thanks for sending this!
>
> > From: Marcus Cooper <codekipper@gmail.com>
> >
> > The X96Q-Pro is an STB based on the Allwinner H313 SoC with a SD
> > slot, 2 USB-2 ports, a 10/100M ethernet port using the SoC's
> > integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver,
> > a blue LED display, an audio video connector and an digital S/PDIF
> > connector.
> >
> > Add the devicetree file describing the currently supported features,
> > namely IR, LEDs, SD card, PMIC, audio codec, SPDIF and USB.
>
> This looks good on a first glance, but seems to miss the DVFS bits? So you
> would need to #include "sun50i-h616-cpu-opp.dtsi" and specify the cpu0
> power supply rail, otherwise you will be stuck at 1GHz.
Hi Andre,
thanks for the speedy review. I'll add the cpu0 rail but I can't get
the device to clock more than 1GHz. Isn't that the case with the H313
chipset?, your Tanix TX1 device doesn't reference the opp.dtsi,
although I do see from the wiki that it's clocked at 1.3GHz
>
> Or is there any issue preventing you doing this?
>
> Two more things below:
>
> > Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> > ---
> > arch/arm64/boot/dts/allwinner/Makefile | 1 +
> > .../dts/allwinner/sun50i-h313-x96q-pro.dts | 176 ++++++++++++++++++
> > 2 files changed, 177 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> > index 00bed412ee31c..e0bcea1840c1f 100644
> > --- a/arch/arm64/boot/dts/allwinner/Makefile
> > +++ b/arch/arm64/boot/dts/allwinner/Makefile
> > @@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
> > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
> > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h64-remix-mini-pc.dtb
> > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
> > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q-pro.dtb
> > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
> > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
> > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
> > new file mode 100644
> > index 0000000000000..4427545ea143c
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
> > @@ -0,0 +1,176 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > +/*
> > + */
>
> Is this missing some copyright notice here?
Ack
>
> > +
> > +/dts-v1/;
> > +
> > +#include "sun50i-h616.dtsi"
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +/ {
> > + model = "X96Q Pro";
> > + compatible = "amediatech,x96q-pro", "allwinner,sun50i-h616";
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +
> > + reg_vcc5v: vcc5v {
> > + /* board wide 5V supply directly from the DC input */
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc-5v";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-always-on;
> > + };
> > +
> > + sound-spdif {
> > + compatible = "simple-audio-card";
> > + simple-audio-card,name = "sun50i-h616-spdif";
> > +
> > + simple-audio-card,cpu {
> > + sound-dai = <&spdif>;
> > + };
> > +
> > + simple-audio-card,codec {
> > + sound-dai = <&spdif_out>;
> > + };
> > + };
> > +
> > + spdif_out: spdif-out {
> > + #sound-dai-cells = <0>;
> > + compatible = "linux,spdif-dit";
> > + };
> > +};
> > +
> > +&codec {
> > + allwinner,audio-routing = "Line Out", "LINEOUT";
> > + status = "okay";
> > +};
> > +
> > +&ehci0 {
> > + status = "okay";
> > +};
> > +
> > +&ehci3 {
> > + status = "okay";
> > +};
> > +
> > +&ir {
> > + status = "okay";
> > +};
> > +
> > +&mmc0 {
> > + vmmc-supply = <®_dldo1>;
> > + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> > + bus-width = <4>;
> > + status = "okay";
> > +};
>
> Would it make sense to add the mmc1 node here, even if there is no driver
> in Linux atm for the WiFi chip? Thanks to SDIO we wouldn't need a
> compatible string, I think. This would also then allow us to describe the
> connected GPIOs.
Ack
>
> And does the box have Bluetooth?
No it doesn't just the XR819 for wifi.
I'll spin a V2 after a few days,
BR,
CK
>
> Cheers,
> Andre
>
> > +
> > +&mmc2 {
> > + vmmc-supply = <®_dldo1>;
> > + vqmmc-supply = <®_aldo1>;
> > + bus-width = <8>;
> > + non-removable;
> > + cap-mmc-hw-reset;
> > + mmc-ddr-1_8v;
> > + mmc-hs200-1_8v;
> > + status = "okay";
> > +};
> > +
> > +&ohci0 {
> > + status = "okay";
> > +};
> > +
> > +&ohci3 {
> > + status = "okay";
> > +};
> > +
> > +&pio {
> > + vcc-pc-supply = <®_dldo1>;
> > + vcc-pf-supply = <®_dldo1>;
> > + vcc-pg-supply = <®_aldo1>;
> > + vcc-ph-supply = <®_dldo1>;
> > + vcc-pi-supply = <®_dldo1>;
> > +};
> > +
> > +&r_i2c {
> > + status = "okay";
> > +
> > + axp313: pmic@36 {
> > + compatible = "x-powers,axp313a";
> > + reg = <0x36>;
> > + #interrupt-cells = <1>;
> > + interrupt-controller;
> > + interrupt-parent = <&pio>;
> > + interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */
> > +
> > + vin1-supply = <®_vcc5v>;
> > + vin2-supply = <®_vcc5v>;
> > + vin3-supply = <®_vcc5v>;
> > +
> > + regulators {
> > + /* Supplies VCC-PLL, so needs to be always on. */
> > + reg_aldo1: aldo1 {
> > + regulator-always-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-name = "vcc1v8";
> > + };
> > +
> > + /* Supplies VCC-IO, so needs to be always on. */
> > + reg_dldo1: dldo1 {
> > + regulator-always-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcc3v3";
> > + };
> > +
> > + reg_dcdc1: dcdc1 {
> > + regulator-always-on;
> > + regulator-min-microvolt = <810000>;
> > + regulator-max-microvolt = <990000>;
> > + regulator-name = "vdd-gpu-sys";
> > + };
> > +
> > + reg_dcdc2: dcdc2 {
> > + regulator-always-on;
> > + regulator-min-microvolt = <810000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-name = "vdd-cpu";
> > + };
> > +
> > + reg_dcdc3: dcdc3 {
> > + regulator-always-on;
> > + regulator-min-microvolt = <1100000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-name = "vdd-dram";
> > + };
> > + };
> > + };
> > +};
> > +
> > +&spdif {
> > + status = "okay";
> > +};
> > +
> > +&uart0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&uart0_ph_pins>;
> > + status = "okay";
> > +};
> > +
> > +&usbotg {
> > + dr_mode = "host"; /* USB A type receptable */
> > + status = "okay";
> > +};
> > +
> > +&usbphy {
> > + status = "okay";
> > +};
>
> d
On Tue, 12 Nov 2024 11:42:17 +0100
Code Kipper <codekipper@gmail.com> wrote:
Hi,
> On Mon, 11 Nov 2024 at 18:27, Andre Przywara <andre.przywara@arm.com> wrote:
> >
> > On Mon, 11 Nov 2024 17:25:06 +0100
> > codekipper@gmail.com wrote:
> >
> > Hi Marcus,
> >
> > many thanks for sending this!
> >
> > > From: Marcus Cooper <codekipper@gmail.com>
> > >
> > > The X96Q-Pro is an STB based on the Allwinner H313 SoC with a SD
> > > slot, 2 USB-2 ports, a 10/100M ethernet port using the SoC's
> > > integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver,
> > > a blue LED display, an audio video connector and an digital S/PDIF
> > > connector.
> > >
> > > Add the devicetree file describing the currently supported features,
> > > namely IR, LEDs, SD card, PMIC, audio codec, SPDIF and USB.
> >
> > This looks good on a first glance, but seems to miss the DVFS bits? So you
> > would need to #include "sun50i-h616-cpu-opp.dtsi" and specify the cpu0
> > power supply rail, otherwise you will be stuck at 1GHz.
> Hi Andre,
> thanks for the speedy review. I'll add the cpu0 rail but I can't get
> the device to clock more than 1GHz. Isn't that the case with the H313
> chipset?,
> your Tanix TX1 device doesn't reference the opp.dtsi,
> although I do see from the wiki that it's clocked at 1.3GHz
It's "do as I say, not do as I do" :-D
Just kidding, actually many thanks for the heads up: you are right, it's
missing there! I think it was just the case of both being merged at the
same time, and the -cpu-opp.dtsi not being in the branch where I based the
.dts on. Will test and fix it!
Regarding the OPPs: If you look at the table in
sun50i_h616_efuse_xlate()[1], and then compare this to those SID numbers collected
in our wiki[2], you will see that the "bins" are actually the packages:
All H616s we have seen use 0x5000 (that's the low 16 bits of the first SID
register value), the H618s uses 0x2000, and presumably all H313s use
0x5c00, and so on. I think BSP code confirms that.
So the H313 uses a separate set of OPPs already (set 4), which is indeed
the worst of them all: is requires higher voltages, and only provides up
to 1.3GHz. So I *think* we should be covered. But please test this and
report back if you have any issues.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/cpufreq/sun50i-cpufreq-nvmem.c#n67
[2] https://linux-sunxi.org/SID_Register_Guide#Currently_known_SID.27s
> > Or is there any issue preventing you doing this?
> >
> > Two more things below:
> >
> > > Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> > > ---
> > > arch/arm64/boot/dts/allwinner/Makefile | 1 +
> > > .../dts/allwinner/sun50i-h313-x96q-pro.dts | 176 ++++++++++++++++++
> > > 2 files changed, 177 insertions(+)
> > > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
> > >
> > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> > > index 00bed412ee31c..e0bcea1840c1f 100644
> > > --- a/arch/arm64/boot/dts/allwinner/Makefile
> > > +++ b/arch/arm64/boot/dts/allwinner/Makefile
> > > @@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
> > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
> > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h64-remix-mini-pc.dtb
> > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
> > > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q-pro.dtb
> > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
> > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
> > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
> > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
> > > new file mode 100644
> > > index 0000000000000..4427545ea143c
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-pro.dts
> > > @@ -0,0 +1,176 @@
> > > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > > +/*
> > > + */
> >
> > Is this missing some copyright notice here?
> Ack
> >
> > > +
> > > +/dts-v1/;
> > > +
> > > +#include "sun50i-h616.dtsi"
> > > +
> > > +#include <dt-bindings/gpio/gpio.h>
> > > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > > +
> > > +/ {
> > > + model = "X96Q Pro";
> > > + compatible = "amediatech,x96q-pro", "allwinner,sun50i-h616";
> > > +
> > > + aliases {
> > > + serial0 = &uart0;
> > > + };
> > > +
> > > + chosen {
> > > + stdout-path = "serial0:115200n8";
> > > + };
> > > +
> > > + reg_vcc5v: vcc5v {
> > > + /* board wide 5V supply directly from the DC input */
> > > + compatible = "regulator-fixed";
> > > + regulator-name = "vcc-5v";
> > > + regulator-min-microvolt = <5000000>;
> > > + regulator-max-microvolt = <5000000>;
> > > + regulator-always-on;
> > > + };
> > > +
> > > + sound-spdif {
> > > + compatible = "simple-audio-card";
> > > + simple-audio-card,name = "sun50i-h616-spdif";
> > > +
> > > + simple-audio-card,cpu {
> > > + sound-dai = <&spdif>;
> > > + };
> > > +
> > > + simple-audio-card,codec {
> > > + sound-dai = <&spdif_out>;
> > > + };
> > > + };
> > > +
> > > + spdif_out: spdif-out {
> > > + #sound-dai-cells = <0>;
> > > + compatible = "linux,spdif-dit";
> > > + };
> > > +};
> > > +
> > > +&codec {
> > > + allwinner,audio-routing = "Line Out", "LINEOUT";
> > > + status = "okay";
> > > +};
> > > +
> > > +&ehci0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&ehci3 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&ir {
> > > + status = "okay";
> > > +};
> > > +
> > > +&mmc0 {
> > > + vmmc-supply = <®_dldo1>;
> > > + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> > > + bus-width = <4>;
> > > + status = "okay";
> > > +};
> >
> > Would it make sense to add the mmc1 node here, even if there is no driver
> > in Linux atm for the WiFi chip? Thanks to SDIO we wouldn't need a
> > compatible string, I think. This would also then allow us to describe the
> > connected GPIOs.
> Ack
> >
> > And does the box have Bluetooth?
> No it doesn't just the XR819 for wifi.
Ah, right, bummer, same with the TX1, which is a bit annoying, because
having BT would make this a bit more useful.
> I'll spin a V2 after a few days,
Thanks!
Cheers,
Andre
> BR,
> CK
> >
> > Cheers,
> > Andre
> >
> > > +
> > > +&mmc2 {
> > > + vmmc-supply = <®_dldo1>;
> > > + vqmmc-supply = <®_aldo1>;
> > > + bus-width = <8>;
> > > + non-removable;
> > > + cap-mmc-hw-reset;
> > > + mmc-ddr-1_8v;
> > > + mmc-hs200-1_8v;
> > > + status = "okay";
> > > +};
> > > +
> > > +&ohci0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&ohci3 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&pio {
> > > + vcc-pc-supply = <®_dldo1>;
> > > + vcc-pf-supply = <®_dldo1>;
> > > + vcc-pg-supply = <®_aldo1>;
> > > + vcc-ph-supply = <®_dldo1>;
> > > + vcc-pi-supply = <®_dldo1>;
> > > +};
> > > +
> > > +&r_i2c {
> > > + status = "okay";
> > > +
> > > + axp313: pmic@36 {
> > > + compatible = "x-powers,axp313a";
> > > + reg = <0x36>;
> > > + #interrupt-cells = <1>;
> > > + interrupt-controller;
> > > + interrupt-parent = <&pio>;
> > > + interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */
> > > +
> > > + vin1-supply = <®_vcc5v>;
> > > + vin2-supply = <®_vcc5v>;
> > > + vin3-supply = <®_vcc5v>;
> > > +
> > > + regulators {
> > > + /* Supplies VCC-PLL, so needs to be always on. */
> > > + reg_aldo1: aldo1 {
> > > + regulator-always-on;
> > > + regulator-min-microvolt = <1800000>;
> > > + regulator-max-microvolt = <1800000>;
> > > + regulator-name = "vcc1v8";
> > > + };
> > > +
> > > + /* Supplies VCC-IO, so needs to be always on. */
> > > + reg_dldo1: dldo1 {
> > > + regulator-always-on;
> > > + regulator-min-microvolt = <3300000>;
> > > + regulator-max-microvolt = <3300000>;
> > > + regulator-name = "vcc3v3";
> > > + };
> > > +
> > > + reg_dcdc1: dcdc1 {
> > > + regulator-always-on;
> > > + regulator-min-microvolt = <810000>;
> > > + regulator-max-microvolt = <990000>;
> > > + regulator-name = "vdd-gpu-sys";
> > > + };
> > > +
> > > + reg_dcdc2: dcdc2 {
> > > + regulator-always-on;
> > > + regulator-min-microvolt = <810000>;
> > > + regulator-max-microvolt = <1100000>;
> > > + regulator-name = "vdd-cpu";
> > > + };
> > > +
> > > + reg_dcdc3: dcdc3 {
> > > + regulator-always-on;
> > > + regulator-min-microvolt = <1100000>;
> > > + regulator-max-microvolt = <1100000>;
> > > + regulator-name = "vdd-dram";
> > > + };
> > > + };
> > > + };
> > > +};
> > > +
> > > +&spdif {
> > > + status = "okay";
> > > +};
> > > +
> > > +&uart0 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&uart0_ph_pins>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&usbotg {
> > > + dr_mode = "host"; /* USB A type receptable */
> > > + status = "okay";
> > > +};
> > > +
> > > +&usbphy {
> > > + status = "okay";
> > > +};
> >
> > d
© 2016 - 2024 Red Hat, Inc.