Add support for getting the interface (CMOS or LVDS) used by the AXI ADC
IP.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
no changes in v6.
 drivers/iio/adc/adi-axi-adc.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
index 5c8c87eb36d1..f6475bc93796 100644
--- a/drivers/iio/adc/adi-axi-adc.c
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -39,6 +39,9 @@
 #define   ADI_AXI_REG_RSTN_MMCM_RSTN		BIT(1)
 #define   ADI_AXI_REG_RSTN_RSTN			BIT(0)
 
+#define ADI_AXI_ADC_REG_CONFIG			0x000c
+#define   ADI_AXI_ADC_REG_CONFIG_CMOS_OR_LVDS_N	BIT(7)
+
 #define ADI_AXI_ADC_REG_CTRL			0x0044
 #define    ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK	BIT(1)
 
@@ -290,6 +293,25 @@ static int axi_adc_chan_disable(struct iio_backend *back, unsigned int chan)
 				 ADI_AXI_REG_CHAN_CTRL_ENABLE);
 }
 
+static int axi_adc_interface_type_get(struct iio_backend *back,
+				      enum iio_backend_interface_type *type)
+{
+	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADI_AXI_ADC_REG_CONFIG, &val);
+	if (ret)
+		return ret;
+
+	if (val & ADI_AXI_ADC_REG_CONFIG_CMOS_OR_LVDS_N)
+		*type = IIO_BACKEND_INTERFACE_SERIAL_CMOS;
+	else
+		*type = IIO_BACKEND_INTERFACE_SERIAL_LVDS;
+
+	return 0;
+}
+
 static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
 						 struct iio_dev *indio_dev)
 {
@@ -337,6 +359,7 @@ static const struct iio_backend_ops adi_axi_adc_ops = {
 	.iodelay_set = axi_adc_iodelays_set,
 	.test_pattern_set = axi_adc_test_pattern_set,
 	.chan_status = axi_adc_chan_status,
+	.interface_type_get = axi_adc_interface_type_get,
 	.debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
 	.debugfs_print_chan_status = iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
 };
-- 
2.47.0