From: Tony Luck <tony.luck@intel.com>
Split each vendor specific part into its own helper function.
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
---
Changes in v4:
- Add necessary blank lines in apply_quirks_amd() (Yazen).
- Use 'mca_cfg' instead of 'cfg' in apply_quirks_*(). (Yazen).
Changes in v3:
- New patch.
arch/x86/kernel/cpu/mce/core.c | 192 ++++++++++++++++++---------------
1 file changed, 104 insertions(+), 88 deletions(-)
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index ce6fe5e20805..3855ec2ed0e0 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1910,101 +1910,117 @@ static void __mcheck_cpu_check_banks(void)
}
}
+static void apply_quirks_amd(struct cpuinfo_x86 *c)
+{
+ struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
+
+ /* This should be disabled by the BIOS, but isn't always */
+ if (c->x86 == 15 && this_cpu_read(mce_num_banks) > 4) {
+ /*
+ * disable GART TBL walk error reporting, which
+ * trips off incorrectly with the IOMMU & 3ware
+ * & Cerberus:
+ */
+ clear_bit(10, (unsigned long *)&mce_banks[4].ctl);
+ }
+
+ if (c->x86 < 0x11 && mca_cfg.bootlog < 0) {
+ /*
+ * Lots of broken BIOS around that don't clear them
+ * by default and leave crap in there. Don't log:
+ */
+ mca_cfg.bootlog = 0;
+ }
+
+ /*
+ * Various K7s with broken bank 0 around. Always disable
+ * by default.
+ */
+ if (c->x86 == 6 && this_cpu_read(mce_num_banks) > 0)
+ mce_banks[0].ctl = 0;
+
+ /*
+ * overflow_recov is supported for F15h Models 00h-0fh
+ * even though we don't have a CPUID bit for it.
+ */
+ if (c->x86 == 0x15 && c->x86_model <= 0xf)
+ mce_flags.overflow_recov = 1;
+
+ if (c->x86 >= 0x17 && c->x86 <= 0x1A)
+ mce_flags.zen_ifu_quirk = 1;
+}
+
+static void apply_quirks_intel(struct cpuinfo_x86 *c)
+{
+ struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
+
+ /*
+ * SDM documents that on family 6 bank 0 should not be written
+ * because it aliases to another special BIOS controlled
+ * register.
+ * But it's not aliased anymore on model 0x1a+
+ * Don't ignore bank 0 completely because there could be a
+ * valid event later, merely don't write CTL0.
+ */
+ if (c->x86 == 6 && c->x86_model < 0x1A && this_cpu_read(mce_num_banks) > 0)
+ mce_banks[0].init = false;
+
+ /*
+ * All newer Intel systems support MCE broadcasting. Enable
+ * synchronization with a one second timeout.
+ */
+ if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
+ mca_cfg.monarch_timeout < 0)
+ mca_cfg.monarch_timeout = USEC_PER_SEC;
+
+ /*
+ * There are also broken BIOSes on some Pentium M and
+ * earlier systems:
+ */
+ if (c->x86 == 6 && c->x86_model <= 13 && mca_cfg.bootlog < 0)
+ mca_cfg.bootlog = 0;
+
+ if (c->x86_vfm == INTEL_SANDYBRIDGE_X)
+ mce_flags.snb_ifu_quirk = 1;
+
+ /*
+ * Skylake, Cascacde Lake and Cooper Lake require a quirk on
+ * rep movs.
+ */
+ if (c->x86_vfm == INTEL_SKYLAKE_X)
+ mce_flags.skx_repmov_quirk = 1;
+}
+
+static void apply_quirks_zhaoxin(struct cpuinfo_x86 *c)
+{
+ /*
+ * All newer Zhaoxin CPUs support MCE broadcasting. Enable
+ * synchronization with a one second timeout.
+ */
+ if (c->x86 > 6 || (c->x86_model == 0x19 || c->x86_model == 0x1f)) {
+ if (mca_cfg.monarch_timeout < 0)
+ mca_cfg.monarch_timeout = USEC_PER_SEC;
+ }
+}
+
/* Add per CPU specific workarounds here */
static bool __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
{
- struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
struct mca_config *cfg = &mca_cfg;
- if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
+ switch (c->x86_vendor) {
+ case X86_VENDOR_UNKNOWN:
pr_info("unknown CPU type - not enabling MCE support\n");
return false;
- }
-
- /* This should be disabled by the BIOS, but isn't always */
- if (c->x86_vendor == X86_VENDOR_AMD) {
- if (c->x86 == 15 && this_cpu_read(mce_num_banks) > 4) {
- /*
- * disable GART TBL walk error reporting, which
- * trips off incorrectly with the IOMMU & 3ware
- * & Cerberus:
- */
- clear_bit(10, (unsigned long *)&mce_banks[4].ctl);
- }
- if (c->x86 < 0x11 && cfg->bootlog < 0) {
- /*
- * Lots of broken BIOS around that don't clear them
- * by default and leave crap in there. Don't log:
- */
- cfg->bootlog = 0;
- }
- /*
- * Various K7s with broken bank 0 around. Always disable
- * by default.
- */
- if (c->x86 == 6 && this_cpu_read(mce_num_banks) > 0)
- mce_banks[0].ctl = 0;
-
- /*
- * overflow_recov is supported for F15h Models 00h-0fh
- * even though we don't have a CPUID bit for it.
- */
- if (c->x86 == 0x15 && c->x86_model <= 0xf)
- mce_flags.overflow_recov = 1;
-
- if (c->x86 >= 0x17 && c->x86 <= 0x1A)
- mce_flags.zen_ifu_quirk = 1;
-
- }
-
- if (c->x86_vendor == X86_VENDOR_INTEL) {
- /*
- * SDM documents that on family 6 bank 0 should not be written
- * because it aliases to another special BIOS controlled
- * register.
- * But it's not aliased anymore on model 0x1a+
- * Don't ignore bank 0 completely because there could be a
- * valid event later, merely don't write CTL0.
- */
-
- if (c->x86 == 6 && c->x86_model < 0x1A && this_cpu_read(mce_num_banks) > 0)
- mce_banks[0].init = false;
-
- /*
- * All newer Intel systems support MCE broadcasting. Enable
- * synchronization with a one second timeout.
- */
- if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
- cfg->monarch_timeout < 0)
- cfg->monarch_timeout = USEC_PER_SEC;
-
- /*
- * There are also broken BIOSes on some Pentium M and
- * earlier systems:
- */
- if (c->x86 == 6 && c->x86_model <= 13 && cfg->bootlog < 0)
- cfg->bootlog = 0;
-
- if (c->x86_vfm == INTEL_SANDYBRIDGE_X)
- mce_flags.snb_ifu_quirk = 1;
-
- /*
- * Skylake, Cascacde Lake and Cooper Lake require a quirk on
- * rep movs.
- */
- if (c->x86_vfm == INTEL_SKYLAKE_X)
- mce_flags.skx_repmov_quirk = 1;
- }
-
- if (c->x86_vendor == X86_VENDOR_ZHAOXIN) {
- /*
- * All newer Zhaoxin CPUs support MCE broadcasting. Enable
- * synchronization with a one second timeout.
- */
- if (c->x86 > 6 || (c->x86_model == 0x19 || c->x86_model == 0x1f)) {
- if (cfg->monarch_timeout < 0)
- cfg->monarch_timeout = USEC_PER_SEC;
- }
+ case X86_VENDOR_AMD:
+ apply_quirks_amd(c);
+ break;
+ case X86_VENDOR_INTEL:
+ apply_quirks_intel(c);
+ break;
+ case X86_VENDOR_ZHAOXIN:
+ apply_quirks_zhaoxin(c);
+ break;
}
if (cfg->monarch_timeout < 0)
--
2.17.1On 11/10/2024 10:04 PM, Qiuxu Zhuo wrote: > From: Tony Luck <tony.luck@intel.com> > > Split each vendor specific part into its own helper function. > > Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> > Signed-off-by: Tony Luck <tony.luck@intel.com> > Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> > --- Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
© 2016 - 2024 Red Hat, Inc.