Add compatible string 'nxp,p3t1085' since p3t1085's register layout is the
same as tmp108.
The p3t1085 supports I3C interface.
Update document tmp108.rst and Kconfig's help context.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v2 to v3
- new patch
- update documment
---
Documentation/hwmon/tmp108.rst | 8 ++++++++
drivers/hwmon/Kconfig | 2 +-
drivers/hwmon/tmp108.c | 1 +
3 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/Documentation/hwmon/tmp108.rst b/Documentation/hwmon/tmp108.rst
index 6df7cf1b42f49..bc4941d982681 100644
--- a/Documentation/hwmon/tmp108.rst
+++ b/Documentation/hwmon/tmp108.rst
@@ -3,6 +3,14 @@ Kernel driver tmp108
Supported chips:
+ * NXP P3T1085
+
+ Prefix: 'p3t1085'
+
+ Addresses scanned: none
+
+ Datasheet: https://www.nxp.com/docs/en/data-sheet/P3T1085UK.pdf
+
* Texas Instruments TMP108
Prefix: 'tmp108'
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index cfb4e9314c62a..d43ca7aa4a548 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2300,7 +2300,7 @@ config SENSORS_TMP108
select REGMAP_I2C
help
If you say yes here you get support for Texas Instruments TMP108
- sensor chips.
+ sensor chips and NXP P3T1085.
This driver can also be built as a module. If so, the module
will be called tmp108.
diff --git a/drivers/hwmon/tmp108.c b/drivers/hwmon/tmp108.c
index a82bbc959eb15..b561b452d8d39 100644
--- a/drivers/hwmon/tmp108.c
+++ b/drivers/hwmon/tmp108.c
@@ -420,6 +420,7 @@ MODULE_DEVICE_TABLE(i2c, tmp108_i2c_ids);
#ifdef CONFIG_OF
static const struct of_device_id tmp108_of_ids[] = {
+ { .compatible = "nxp,p3t1085", },
{ .compatible = "ti,tmp108", },
{}
};
--
2.34.1