.../rk3588-friendlyelec-cm3588-nas.dts | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+)
Add the necessary DT changes to enable HDMI0 on FriendlyElec CM3588 NAS.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
Tested and working with video=1920x1080@60 cmdline on a CM3588 NAS
---
.../rk3588-friendlyelec-cm3588-nas.dts | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
index 411007cb8118..b3a04ca370bb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
@@ -11,6 +11,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588-friendlyelec-cm3588.dtsi"
@@ -89,6 +90,17 @@ button-user {
};
};
+ hdmi0-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con_in: endpoint {
+ remote-endpoint = <&hdmi0_out_con>;
+ };
+ };
+ };
+
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
@@ -307,6 +319,26 @@ &gpio4 {
"", "", "", "";
};
+&hdmi0 {
+ status = "okay";
+};
+
+&hdmi0_in {
+ hdmi0_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi0>;
+ };
+};
+
+&hdmi0_out {
+ hdmi0_out_con: endpoint {
+ remote-endpoint = <&hdmi0_con_in>;
+ };
+};
+
+&hdptxphy_hdmi0 {
+ status = "okay";
+};
+
/* Connected to MIPI-DSI0 */
&i2c5 {
pinctrl-names = "default";
@@ -776,3 +808,18 @@ usbdp_phy0_dp_altmode_mux: endpoint@1 {
&usbdp_phy1 {
status = "okay";
};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi0_in_vp0>;
+ };
+};
--
2.46.2
On Fri, 8 Nov 2024 17:14:19 +0000, Jonas Karlman wrote: > Add the necessary DT changes to enable HDMI0 on FriendlyElec CM3588 NAS. > > Applied, thanks! [1/1] arm64: dts: rockchip: Enable HDMI0 on FriendlyElec CM3588 NAS commit: 6f846fe4d07a1b16e769754c5101c2e5a039d729 Best regards, -- Heiko Stuebner <heiko@sntech.de>
© 2016 - 2024 Red Hat, Inc.