The driver uses a static CSI-2 virtual channel mapping where all virtual
channels from an RX port are mapped to a virtual channel number matching
the RX port number.

The UB960 and UB9702 have different registers for the purpose, and the
UB9702 version is not correct. Each of the VC_ID_MAP registers do not
contain a single mapping, as the driver currently thinks, but two.

This can cause received VCs other than 0 to be mapped in a wrong way.

Fix this by writing both mappings to each register.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
---
 drivers/media/i2c/ds90ub960.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index 2273e79430c0..98d815526341 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -2534,7 +2534,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
 				for (i = 0; i < 8; i++)
 					ub960_rxport_write(priv, nport,
 							   UB960_RR_VC_ID_MAP(i),
-							   nport);
+							   (nport << 4) | nport);
 			}
 
 			break;

-- 
2.43.0