Fix unintentional word repetitions in devicetree binding documentation:
- usb.txt: Fix repeated "two"
- mvebu-devbus.txt: Fix repeated "from"
- gpio.txt: Fix repeated "Both"
- pinctrl-bindings.txt: Fix repeated "device"
- cavium/bootbus.txt: Fix repeated "one"

These issues were identified using the checkpatch.pl script.

Signed-off-by: Abhinav Saxena <xandfury@gmail.com>
---
 Documentation/devicetree/bindings/gpio/gpio.txt                 | 2 +-
 .../devicetree/bindings/memory-controllers/mvebu-devbus.txt     | 2 +-
 Documentation/devicetree/bindings/mips/cavium/bootbus.txt       | 2 +-
 Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt  | 2 +-
 Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt     | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index d82c32217fff..530420475a4f 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -304,7 +304,7 @@ pins 50..69.
 It is also possible to use pin groups for gpio ranges when pin groups are the
 easiest and most convenient mapping.
 
-Both both <pinctrl-base> and <count> must set to 0 when using named pin groups
+Both <pinctrl-base> and <count> must set to 0 when using named pin groups
 names.
 
 The property gpio-ranges-group-names must contain exactly one string for each
diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
index 8b9388cc1ccc..1983d7eabd2b 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
@@ -43,7 +43,7 @@ Read parameters:
  - devbus,bus-width:    Defines the bus width, in bits (e.g. <16>).
                         Mandatory, except if devbus,keep-config is used.
 
- - devbus,badr-skew-ps: Defines the time delay from from A[2:0] toggle,
+ - devbus,badr-skew-ps: Defines the time delay from A[2:0] toggle,
                         to read data sample. This parameter is useful for
                         synchronous pipelined devices, where the address
                         precedes the read data by one or two cycles.
diff --git a/Documentation/devicetree/bindings/mips/cavium/bootbus.txt b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
index 6581478225a2..1bc655d285ce 100644
--- a/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
+++ b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
@@ -15,7 +15,7 @@ Properties:
 
 - #size-cells: Must be <1>.
 
-- ranges: There must be one one triplet of (child-bus-address,
+- ranges: There must be one triplet of (child-bus-address,
   parent-bus-address, length) for each active chip select.  If the
   length element for any triplet is zero, the chip select is disabled,
   making it inactive.
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index 6904072d3944..500b76ba2ab3 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -18,7 +18,7 @@ states. The number and names of those states is defined by the client device's
 own binding.
 
 The common pinctrl bindings defined in this file provide an infrastructure
-for client device device tree nodes to map those state names to the pin
+for client device tree nodes to map those state names to the pin
 configuration used by those states.
 
 Note that pin controllers themselves may also be client devices of themselves.
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
index da13999337a4..682db2b561bb 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
@@ -3,7 +3,7 @@ Freescale QUICC Engine USB Controller
 Required properties:
 - compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb".
 - reg : the first two cells should contain usb registers location and
-  length, the next two two cells should contain PRAM location and
+  length, the next two cells should contain PRAM location and
   length.
 - interrupts : should contain USB interrupt.
 - fsl,fullspeed-clock : specifies the full speed USB clock source:
-- 
2.34.1

On Wed, Nov 06, 2024 at 11:11:23PM -0700, Abhinav Saxena wrote:
> Fix unintentional word repetitions in devicetree binding documentation:
> - usb.txt: Fix repeated "two"
> - mvebu-devbus.txt: Fix repeated "from"
> - gpio.txt: Fix repeated "Both"
> - pinctrl-bindings.txt: Fix repeated "device"
> - cavium/bootbus.txt: Fix repeated "one"
> 
> These issues were identified using the checkpatch.pl script.
> 
> Signed-off-by: Abhinav Saxena <xandfury@gmail.com>
> ---
>  Documentation/devicetree/bindings/gpio/gpio.txt                 | 2 +-

This and...

>  .../devicetree/bindings/memory-controllers/mvebu-devbus.txt     | 2 +-
>  Documentation/devicetree/bindings/mips/cavium/bootbus.txt       | 2 +-
>  Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt  | 2 +-

...this I'll take. The others need to be converted to schema.

>  Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt     | 2 +-
>  5 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
> index d82c32217fff..530420475a4f 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio.txt
> @@ -304,7 +304,7 @@ pins 50..69.
>  It is also possible to use pin groups for gpio ranges when pin groups are the
>  easiest and most convenient mapping.
>  
> -Both both <pinctrl-base> and <count> must set to 0 when using named pin groups
> +Both <pinctrl-base> and <count> must set to 0 when using named pin groups
>  names.
>  
>  The property gpio-ranges-group-names must contain exactly one string for each
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
> index 8b9388cc1ccc..1983d7eabd2b 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
> +++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
> @@ -43,7 +43,7 @@ Read parameters:
>   - devbus,bus-width:    Defines the bus width, in bits (e.g. <16>).
>                          Mandatory, except if devbus,keep-config is used.
>  
> - - devbus,badr-skew-ps: Defines the time delay from from A[2:0] toggle,
> + - devbus,badr-skew-ps: Defines the time delay from A[2:0] toggle,
>                          to read data sample. This parameter is useful for
>                          synchronous pipelined devices, where the address
>                          precedes the read data by one or two cycles.
> diff --git a/Documentation/devicetree/bindings/mips/cavium/bootbus.txt b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
> index 6581478225a2..1bc655d285ce 100644
> --- a/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
> +++ b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
> @@ -15,7 +15,7 @@ Properties:
>  
>  - #size-cells: Must be <1>.
>  
> -- ranges: There must be one one triplet of (child-bus-address,
> +- ranges: There must be one triplet of (child-bus-address,
>    parent-bus-address, length) for each active chip select.  If the
>    length element for any triplet is zero, the chip select is disabled,
>    making it inactive.
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> index 6904072d3944..500b76ba2ab3 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> @@ -18,7 +18,7 @@ states. The number and names of those states is defined by the client device's
>  own binding.
>  
>  The common pinctrl bindings defined in this file provide an infrastructure
> -for client device device tree nodes to map those state names to the pin
> +for client device tree nodes to map those state names to the pin

Actually I think this was correct. See "client device" used above. 
Maybe "client device Devicetree nodes" would be a bit clearer and use 
the right form of Devicetree.

Rob

On Wed, Nov 06, 2024 at 11:11:23PM -0700, Abhinav Saxena wrote:
> Fix unintentional word repetitions in devicetree binding documentation:
> - usb.txt: Fix repeated "two"
> - mvebu-devbus.txt: Fix repeated "from"
> - gpio.txt: Fix repeated "Both"
> - pinctrl-bindings.txt: Fix repeated "device"
> - cavium/bootbus.txt: Fix repeated "one"

This we see from the diff. This is trivial commit, so rather write
concise commit msg.

Please use subject prefixes matching the subsystem. You can get them for
example with 'git log --oneline -- DIRECTORY_OR_FILE' on the directory
your patch is touching. For bindings, the preferred subjects are
explained here:
https://www.kernel.org/doc/html/latest/devicetree/bindings/submitting-patches.html#i-for-patch-submitters

With changes above:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof