From: Heiko Stuebner <heiko.stuebner@cherry.de>

The RK3588 comes with two DSI2 controllers based on a new Synopsis IP.
Add the necessary nodes for them.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index 8c95c56e8097..6d31de2a6930 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -1414,6 +1414,62 @@ i2s9_8ch: i2s@fddfc000 {
 		status = "disabled";
 	};
 
+	dsi0: dsi@fde20000 {
+		compatible = "rockchip,rk3588-mipi-dsi2";
+		reg = <0x0 0xfde20000 0x0 0x10000>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+		clock-names = "pclk", "sys";
+		resets = <&cru SRST_P_DSIHOST0>;
+		reset-names = "apb";
+		power-domains = <&power RK3588_PD_VOP>;
+		phys = <&mipidcphy0>;
+		phy-names = "dcphy";
+		rockchip,grf = <&vop_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi0_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	dsi1: dsi@fde30000 {
+		compatible = "rockchip,rk3588-mipi-dsi2";
+		reg = <0x0 0xfde30000 0x0 0x10000>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_DSIHOST1>, <&cru CLK_DSIHOST1>;
+		clock-names = "pclk", "sys";
+		resets = <&cru SRST_P_DSIHOST1>;
+		reset-names = "apb";
+		power-domains = <&power RK3588_PD_VOP>;
+		phys = <&mipidcphy1>;
+		phy-names = "dcphy";
+		rockchip,grf = <&vop_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi1_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	hdmi0: hdmi@fde80000 {
 		compatible = "rockchip,rk3588-dw-hdmi-qp";
 		reg = <0x0 0xfde80000 0x0 0x20000>;
-- 
2.45.2