Hello Heiko,
> This series adds a bridge and glue driver for the DSI2 controller found
> in the rk3588 soc from Rockchip, that is based on a Synopsis IP block.
>
> As the manual states:
> The Display Serial Interface 2 (DSI-2) is part of a group of communication
> protocols defined by the MIPI Alliance. The MIPI DSI-2 Host Controller is
> a digital core that implements all protocol functions defined in the
> MIPI DSI-2 Specification.
>
>
> While the driver structure is very similar to the previous DSI controller,
> the programming model of the core is quite different, with a completely
> new register set.
>
> Another notable difference is that the phy interface is variable now too
> in its width and some other settings.
>
>
> Heiko Stuebner (3):
> drm/bridge/synopsys: Add MIPI DSI2 host controller bridge
> dt-bindings: display: rockchip: Add schema for RK3588 DW DSI2
> controller
> drm/rockchip: Add MIPI DSI2 glue driver for RK3588
>
> .../rockchip/rockchip,rk3588-mipi-dsi2.yaml | 119 ++
> drivers/gpu/drm/bridge/synopsys/Kconfig | 6 +
> drivers/gpu/drm/bridge/synopsys/Makefile | 1 +
> .../gpu/drm/bridge/synopsys/dw-mipi-dsi2.c | 1034 +++++++++++++++++
> drivers/gpu/drm/rockchip/Kconfig | 10 +
> drivers/gpu/drm/rockchip/Makefile | 1 +
> .../gpu/drm/rockchip/dw-mipi-dsi2-rockchip.c | 524 +++++++++
> drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +
> drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 1 +
> include/drm/bridge/dw_mipi_dsi2.h | 94 ++
> 10 files changed, 1792 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml
> create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c
> create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi2-rockchip.c
> create mode 100644 include/drm/bridge/dw_mipi_dsi2.h
>
> --
> 2.45.2
Thank you for this work!
Sucessfuly tested this series with DSI/LVDS bridge.
Test configuration was described in the thread "[PATCH v3 0/2] MIPI DSI
phy for rk3588":
https://lore.kernel.org/all/20241120093702.9018-1-dse@thaumatec.com/
Tested-by: Daniel Semkowicz <dse@thaumatec.com>
Kind regards
Daniel