From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Currently, igen6_edac sets edac_op_state to EDAC_OPSTATE_NMI, while the
driver also supports memory errors reported from Machine Check. Initialize
edac_op_state to the correct value according to the configuration data
that the driver probed.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
---
drivers/edac/igen6_edac.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/edac/igen6_edac.c b/drivers/edac/igen6_edac.c
index 07dacf8c10be..fa488ba15059 100644
--- a/drivers/edac/igen6_edac.c
+++ b/drivers/edac/igen6_edac.c
@@ -1350,6 +1350,15 @@ static void unregister_err_handler(void)
unregister_nmi_handler(NMI_SERR, IGEN6_NMI_NAME);
}
+static void opstate_set(struct res_config *cfg)
+{
+ /* Set the mode according to the configuration data. */
+ if (cfg->machine_check)
+ edac_op_state = EDAC_OPSTATE_INT;
+ else
+ edac_op_state = EDAC_OPSTATE_NMI;
+}
+
static int igen6_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
u64 mchbar;
@@ -1367,6 +1376,8 @@ static int igen6_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
goto fail;
+ opstate_set(res_cfg);
+
for (i = 0; i < res_cfg->num_imc; i++) {
rc = igen6_register_mci(i, mchbar, pdev);
if (rc)
@@ -1450,8 +1461,6 @@ static int __init igen6_init(void)
if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
return -EBUSY;
- edac_op_state = EDAC_OPSTATE_NMI;
-
rc = pci_register_driver(&igen6_driver);
if (rc)
return rc;
--
2.47.0