mediatek,pinctrl-mt6795.yaml has different node name patterns which match
bindings of other MediaTek pin controllers, ref for pinmux-node.yaml which
has a description of the pinmux property, as well as some additional
descriptions for some pin configuration properties. Pull those changes
into mediatek,mt6779-pinctrl.yaml and adjust the example DTS to match in
preparation to combine the MT6795 document into it.
The only DT that currently gets affected by these changes is mt6797.dtsi.
It is modified to match the new bindings in a following patch.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
.../pinctrl/mediatek,mt6779-pinctrl.yaml | 38 ++++++++++++++-----
1 file changed, 28 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 3bbc00df5548d..352a88d7b135e 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -111,12 +111,12 @@ allOf:
- "#interrupt-cells"
patternProperties:
- '-[0-9]*$':
+ '-pins$':
type: object
additionalProperties: false
patternProperties:
- '-pins*$':
+ '^pins':
type: object
description:
A pinctrl node should contain at least one subnodes representing the
@@ -124,7 +124,9 @@ patternProperties:
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input
schmitt.
- $ref: /schemas/pinctrl/pincfg-node.yaml
+ allOf:
+ - $ref: pinmux-node.yaml
+ - $ref: pincfg-node.yaml
properties:
pinmux:
@@ -135,9 +137,25 @@ patternProperties:
bias-disable: true
- bias-pull-up: true
-
- bias-pull-down: true
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: Pull up PUPD/R0/R1 type define value.
+ description: |
+ For normal pull up type, it is not necessary to specify R1R0
+ values; When pull up type is PUPD/R0/R1, adding R1R0 defines
+ will set different resistance values.
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: Pull down PUPD/R0/R1 type define value.
+ description: |
+ For normal pull down type, it is not necessary to specify R1R0
+ values; When pull down type is PUPD/R0/R1, adding R1R0 defines
+ will set different resistance values.
input-enable: true
@@ -221,8 +239,8 @@ examples:
#interrupt-cells = <2>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
- mmc0_pins_default: mmc0-0 {
- cmd-dat-pins {
+ mmc0_pins_default: mmc0-pins {
+ pins-cmd-dat {
pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
<PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
<PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
@@ -235,11 +253,11 @@ examples:
input-enable;
mediatek,pull-up-adv = <1>;
};
- clk-pins {
+ pins-clk {
pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
mediatek,pull-down-adv = <2>;
};
- rst-pins {
+ pins-rst {
pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
mediatek,pull-up-adv = <0>;
};
--
2.47.0