Previous setup was:
- pll-west clock registered from driver at of_clk_init();
- Both OCC and UART clocks registered from DT using fixed-factor-clock
compatible.
Now that drivers/clk/clk-eyeq.c supports registering fixed factors, use
that capability to register west-per-occ and west-per-uart (giving them
proper names at the same time).
Also switch from hard-coded index 0 for pll-west to using the
EQ6HC_WEST_PLL_PER constant by exposed dt-bindings headers.
All get exposed at of_clk_init() because they get used by the AMBA PL011
serial ports. Those are instantiated before platform bus infrastructure.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
drivers/clk/clk-eyeq.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-eyeq.c b/drivers/clk/clk-eyeq.c
index a042e9735b68f85c1ad79ec963b0268410b87ad4..640c25788487f8cf6fb4431ed6fb612cf099f114 100644
--- a/drivers/clk/clk-eyeq.c
+++ b/drivers/clk/clk-eyeq.c
@@ -712,12 +712,20 @@ static const struct eqc_early_match_data eqc_eyeq6h_central_early_match_data __i
/* Required early for UART. */
static const struct eqc_pll eqc_eyeq6h_west_early_plls[] = {
- { .index = 0, .name = "pll-west", .reg64 = 0x074 },
+ { .index = EQ6HC_WEST_PLL_PER, .name = "pll-west", .reg64 = 0x074 },
+};
+
+static const struct eqc_fixed_factor eqc_eyeq6h_west_early_fixed_factors[] = {
+ { EQ6HC_WEST_PER_OCC, "west-per-occ", 1, 10, EQ6HC_WEST_PLL_PER },
+ { EQ6HC_WEST_PER_UART, "west-per-uart", 1, 1, EQ6HC_WEST_PER_OCC },
};
static const struct eqc_early_match_data eqc_eyeq6h_west_early_match_data __initconst = {
.early_pll_count = ARRAY_SIZE(eqc_eyeq6h_west_early_plls),
.early_plls = eqc_eyeq6h_west_early_plls,
+
+ .early_fixed_factor_count = ARRAY_SIZE(eqc_eyeq6h_west_early_fixed_factors),
+ .early_fixed_factors = eqc_eyeq6h_west_early_fixed_factors,
};
static void __init eqc_early_init(struct device_node *np,
--
2.47.0