Previous setup was:
- pll-cpu clock registered from driver at of_clk_init();
- occ-cpu clock registered from DT using fixed-factor-clock compatible.
Now that drivers/clk/clk-eyeq.c supports registering fixed factors, use
that capability to register occ-cpu.
Also switch from hard-coded index 0 for pll-cpu to using the
EQ6HC_CENTRAL_PLL_CPU constant by exposed dt-bindings headers.
occ-cpu is exposed at of_clk_init() because it gets used by both the DT
CPU nodes and the GIC timer.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
drivers/clk/clk-eyeq.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-eyeq.c b/drivers/clk/clk-eyeq.c
index 542909085bcedb0f6b5b3cffbdb5761da9981cbc..a042e9735b68f85c1ad79ec963b0268410b87ad4 100644
--- a/drivers/clk/clk-eyeq.c
+++ b/drivers/clk/clk-eyeq.c
@@ -695,12 +695,19 @@ builtin_platform_driver(eqc_driver);
/* Required early for GIC timer. */
static const struct eqc_pll eqc_eyeq6h_central_early_plls[] = {
- { .index = 0, .name = "pll-cpu", .reg64 = 0x02C },
+ { .index = EQ6HC_CENTRAL_PLL_CPU, .name = "pll-cpu", .reg64 = 0x02C },
+};
+
+static const struct eqc_fixed_factor eqc_eyeq6h_central_early_fixed_factors[] = {
+ { EQ6HC_CENTRAL_CPU_OCC, "occ-cpu", 1, 1, EQ6HC_CENTRAL_PLL_CPU },
};
static const struct eqc_early_match_data eqc_eyeq6h_central_early_match_data __initconst = {
.early_pll_count = ARRAY_SIZE(eqc_eyeq6h_central_early_plls),
.early_plls = eqc_eyeq6h_central_early_plls,
+
+ .early_fixed_factor_count = ARRAY_SIZE(eqc_eyeq6h_central_early_fixed_factors),
+ .early_fixed_factors = eqc_eyeq6h_central_early_fixed_factors,
};
/* Required early for UART. */
--
2.47.0