From: "SkyLake.Huang" <skylake.huang@mediatek.com>
This patch removes parens around TRIGGER_NETDEV_RX/TRIGGER_NETDEV_TX in
mtk_phy_led_hw_ctrl_set(), which improves readability.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-phy-lib.c | 44 ++++++++++++++------------
1 file changed, 24 insertions(+), 20 deletions(-)
diff --git a/drivers/net/phy/mediatek/mtk-phy-lib.c b/drivers/net/phy/mediatek/mtk-phy-lib.c
index 34b0957..8d795bc 100644
--- a/drivers/net/phy/mediatek/mtk-phy-lib.c
+++ b/drivers/net/phy/mediatek/mtk-phy-lib.c
@@ -129,29 +129,33 @@ int mtk_phy_led_hw_ctrl_set(struct phy_device *phydev, u8 index,
on |= MTK_PHY_LED_ON_LINK2500;
if (rules & BIT(TRIGGER_NETDEV_RX)) {
- blink |= (on & on_set) ?
- (((on & MTK_PHY_LED_ON_LINK10) ?
- MTK_PHY_LED_BLINK_10RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK100) ?
- MTK_PHY_LED_BLINK_100RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK1000) ?
- MTK_PHY_LED_BLINK_1000RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK2500) ?
- MTK_PHY_LED_BLINK_2500RX : 0)) :
- rx_blink_set;
+ if (on & on_set) {
+ if (on & MTK_PHY_LED_ON_LINK10)
+ blink |= MTK_PHY_LED_BLINK_10RX;
+ if (on & MTK_PHY_LED_ON_LINK100)
+ blink |= MTK_PHY_LED_BLINK_100RX;
+ if (on & MTK_PHY_LED_ON_LINK1000)
+ blink |= MTK_PHY_LED_BLINK_1000RX;
+ if (on & MTK_PHY_LED_ON_LINK2500)
+ blink |= MTK_PHY_LED_BLINK_2500RX;
+ } else {
+ blink |= rx_blink_set;
+ }
}
if (rules & BIT(TRIGGER_NETDEV_TX)) {
- blink |= (on & on_set) ?
- (((on & MTK_PHY_LED_ON_LINK10) ?
- MTK_PHY_LED_BLINK_10TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK100) ?
- MTK_PHY_LED_BLINK_100TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK1000) ?
- MTK_PHY_LED_BLINK_1000TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK2500) ?
- MTK_PHY_LED_BLINK_2500TX : 0)) :
- tx_blink_set;
+ if (on & on_set) {
+ if (on & MTK_PHY_LED_ON_LINK10)
+ blink |= MTK_PHY_LED_BLINK_10TX;
+ if (on & MTK_PHY_LED_ON_LINK100)
+ blink |= MTK_PHY_LED_BLINK_100TX;
+ if (on & MTK_PHY_LED_ON_LINK1000)
+ blink |= MTK_PHY_LED_BLINK_1000TX;
+ if (on & MTK_PHY_LED_ON_LINK2500)
+ blink |= MTK_PHY_LED_BLINK_2500TX;
+ } else {
+ blink |= tx_blink_set;
+ }
}
if (blink || on)
--
2.45.2