Introduce support for Qualcomm new video acceleration hardware i.e.
iris, used for video stream decoding.
Iris is a multi pipe based hardware that offloads video stream decoding
from the application processor (AP). It supports H.264 decoding. The AP
communicates with hardware through a well defined protocol, called as
host firmware interface (HFI), which provides fine-grained and
asynchronous control over individual hardware features.
This driver implements upgraded HFI gen2 to communicate with firmware.
It supports SM8550 which is based out of HFI gen 2. It also supports
SM8250 which is based out of HFI gen1.
This driver comes with below capabilities:
- V4L2 complaint video driver with M2M and STREAMING capability.
- Supports H264 decoder.
This driver comes with below features:
- Centralized resource management.
- Centralized management of core and instance states.
- Defines platform specific capabilities and features. As a results, it
provides a single point of control to enable/disable a given feature
depending on specific platform capabilities.
- Handles various video recommended sequences, like DRC, Drain, Seek,
EOS.
- Implements asynchronous communication with hardware to achieve better
experience in low latency usecases.
- Output and capture planes are controlled independently. Thereby
providing a way to reconfigure individual plane.
- Native hardware support of LAST flag which is mandatory to align with
port reconfiguration and DRAIN sequence as per V4L guidelines.
Changes since v4:
- Fixed commit message length for all patches (Krzysztof)
- Migrated back to remove from remove_new (Uwe Kleine-König)
- Removed support for g_volatle_ctrl (Hans)
- Added changes to update minimum buffer count whenever the hardware
requirement changes (Hans)
- Removed state checks from try/g/s_fmt ioctls (Hans)
- Removed wait_prepare() and wait_finish callbacks (Hans)
- Added support for remove_bufs (Hans)
- Added module param based configurability to select between venus and
iris drivers for platforms supported by both drivers (Jianhua, Dmitry)
- Addressed misc other review comments from Hans.
- Fixed issues reported by kernel bot.
- Link to v4: https://lore.kernel.org/r/20241014-qcom-video-iris-v4-v4-0-c5eaa4e9ab9e@quicinc.com
Changes since v3:
- Fixed the style issues with dt binding (Krzysztof)
- Pushed the patch to add maintainers to end of the series (Krzysztof,
Dmitry)
- Moved the resource initialization next to probe in iris_probe.c and
squashed the patch of probe and resource initialization (Krzysztof)
- Removed error prints from probe function (Krzysztof)
- Defined bit fields used for register read/write with macros for better
context (Bryan)
- Converted if/else to switch/case wherever applicable (Bryan)
- Removed defensive NULL checks wherever not required (Bryan, Krzysztof)
- Removed core->state checks except for below scenarios (Bryan)
- When reverse thread (firmware) can move the state of the core to
error state.
- When client can force close the driver and there are still pending
firmware responses to be read from shared queues (msg and dbg)
- For PM operations, since its a delayed autosuspend work and sys
error handler from the reverse thread can move the state to core
deinit state anytime.
- Acquiring core->lock only for below scenarios (Bryan)
- Writing to registers.
- Reading/Writing from/to shared queues.
- Traversing the instance list of core.
- To protect the core->state when it can changed by reverse thread.
- Acquiring inst->lock only for below scenario which is needed (Bryan)
- Serializing the forward and reverse thread
- To protect the inst structure where the values can be modified by
firmware.
- Removed usage of core->power_enabled (Krzysztof, Bryan)
- Removed usage of mutex_is_locked (Krzysztof, Bryan)
- Use C structure for instance caps (Dmitry)
- Split the ctrl ops patch by keeping only the defines, struct and caps
needed to intialize the ctrl handler and to implement s/g_ctrl
(Dmitry)
- Removed the instance state checks to allow v4l2-ctl, relying on
standard vb2 checks instead. (Hans)
- Converted APIs to void wherever applicable except for below (Bryan)
- iris_hfi_gen2_handle_session_error and
iris_hfi_gen2_handle_session_property cannot be converted to void
even though they always return 0.
Because these are two of the handlers invoked from
iris_hfi_gen2_handle_session_response and are of
iris_hfi_gen2_inst_hfi_range struct type, where same prototype is
followed for all handlers and return type of all handers should be
'int'.
And we cannot have a switch case/if else to handle these
responses from firmware because we need to parse the responses in a
particular sequence.
That's why we opted for this handler based design instead of
introducing multiple for loop with code duplication.
- Fixed issues reported by kernel bot.
- Fixed v4l2 compliance issue reported with "-s" options based on the
inputs from Hans.
- Addressed all other review comments and made some code improvements.
Changes since v2:
- introduced support for HFI gen1.
- deprecated Encoder and HEVC, VP9 codecs.
- removed custom vb2 mem ops and used standard framework instead.
- added support for mmap streaming mode.
- migrated all the buffer APIs to mem2mem helper functions.
- registered iris buffer with vb2 framework.
- migrated to clk_bulk, reset_bulk and icc_bulk APIs.
- used pm_domain_attach/detach_list APIs.
- migrated to read/writel and other available helpers for register
access instead of custom wrappers.
- added documentation for various structures.
- addressed many other review comments from v2.
Note: A harmless onetime error log "Lucid PLL latch failed. Output may
be unstable!" is seen during bootup. It doesn't impact any video
usecase and is currently under discussion.
Static tools like checkpatch, smatch, dt_binding_check, sparse and
Coccinelle run successfully with this driver.
This driver is tested with v4l2-ctl[1] and Gstreamer[2].
[1]: v4l2-ctl --verbose --set-fmt-video-out=pixelformat=H264
--set-fmt-video=pixelformat=NV12 --stream-mmap --stream-out-mmap
--stream-from /media/FVDO_Freeway_720p.264 --stream-to out.NV12
[2]: gst-launch-1.0 filesrc location=/media/media/4k_decode_clip.264 !
h264parse ! v4l2h264dec capture-io-mode=dmabuf ! kmssink
The driver is tested with v4l2-compliance[1]
[1]https://git.linuxtv.org/hverkuil/v4l-utils.git/log/?h=createbufs
Result on SM8550:
v4l2-compliance --stream-from /media/FVDO_Freeway_720p.264 -s250
v4l2-compliance 1.29.0-5271, 64 bits, 64-bit time_t
v4l2-compliance SHA: 35ce0bcbc231 2024-10-30 14:31:52
Compliance test for iris_driver device /dev/video0:
Driver Info:
Driver name : iris_driver
Card type : iris_decoder
Bus info : platform:aa00000.video-codec
Driver version : 6.12.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Detected Stateful Decoder
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 5 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK
test Composing: OK
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
test blocking wait: OK
Test input 0:
Streaming ioctls:
test read/write: OK (Not Supported)
test MMAP (select, REQBUFS): OK
test MMAP (epoll, REQBUFS): OK
test MMAP (select, CREATE_BUFS): OK
test MMAP (epoll, CREATE_BUFS): OK
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for iris_driver device /dev/video0: 54, Succeeded: 54, Failed: 0,
Warnings: 0
Result on SM8250:
v4l2-compliance --stream-from /media/FVDO_Freeway_720p.264 -s250
v4l2-compliance 1.29.0-5271, 64 bits, 64-bit time_t
v4l2-compliance SHA: 35ce0bcbc231 2024-10-30 14:31:52
Compliance test for iris_driver device /dev/video0:
Driver Info:
Driver name : iris_driver
Card type : iris_decoder
Bus info : platform:aa00000.video-codec
Driver version : 6.12.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Detected Stateful Decoder
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 5 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK
test Composing: OK
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
test blocking wait: OK
Test input 0:
Streaming ioctls:
test read/write: OK (Not Supported)
test MMAP (select, REQBUFS): OK
test MMAP (epoll, REQBUFS): OK
test MMAP (select, CREATE_BUFS): OK
test MMAP (epoll, CREATE_BUFS): OK
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for iris_driver device /dev/video0: 54, Succeeded: 54, Failed: 0,
Warnings: 0
The result of fluster test on SM8550:
77/135 while testing JVT-AVC_V1 with
GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
The failing tests are:
- 52 test vectors failed due to interlaced clips: Interlaced decoding is
not supported in iris driver.
Test Vectors:
cabac_mot_fld0_full
cabac_mot_mbaff0_full
cabac_mot_picaff0_full
CABREF3_Sand_D
CAFI1_SVA_C
CAMA1_Sony_C
CAMA1_TOSHIBA_B
cama1_vtc_c
cama2_vtc_b
CAMA3_Sand_E
cama3_vtc_b
CAMACI3_Sony_C
CAMANL1_TOSHIBA_B
CAMANL2_TOSHIBA_B
CAMANL3_Sand_E
CAMASL3_Sony_B
CAMP_MOT_MBAFF_L30
CAMP_MOT_MBAFF_L31
CANLMA2_Sony_C
CANLMA3_Sony_C
CAPA1_TOSHIBA_B
CAPAMA3_Sand_F
cavlc_mot_fld0_full_B
cavlc_mot_mbaff0_full_B
cavlc_mot_picaff0_full_B
CVCANLMA2_Sony_C
CVFI1_Sony_D
CVFI1_SVA_C
CVFI2_Sony_H
CVFI2_SVA_C
CVMA1_Sony_D
CVMA1_TOSHIBA_B
CVMANL1_TOSHIBA_B
CVMANL2_TOSHIBA_B
CVMAPAQP3_Sony_E
CVMAQP2_Sony_G
CVMAQP3_Sony_D
CVMP_MOT_FLD_L30_B
CVNLFI1_Sony_C
CVNLFI2_Sony_H
CVPA1_TOSHIBA_B
FI1_Sony_E
MR6_BT_B
MR7_BT_B
MR8_BT_B
MR9_BT_B
Sharp_MP_Field_1_B
Sharp_MP_Field_2_B
Sharp_MP_Field_3_B
Sharp_MP_PAFF_1r2
Sharp_MP_PAFF_2r
CVMP_MOT_FRM_L31_B
- 3 test vectors failed due to unsupported bitstream.
num_slice_group_minus1 greater than zero is not supported by the
hardware.
Test Vectors:
FM1_BT_B
FM1_FT_E
FM2_SVA_C
- 2 test vectors failed because SP_SLICE type is not supported by the
hardware.
Test Vectors:
SP1_BT_A
sp2_bt_b
- 1 test vector failed due to unsupported profile:
V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED is being deprecated from sm8550
onwards due to hardware issues.
Test Vectors:
BA3_SVA_C
23/69 while testing JVT-FR-EXT with
GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
The failing tests are:
- 21 test vectors failed due to interlaced clips: Interlaced decoding is
not supported in iris driver.
Test Vectors:
brcm_freh4
brcm_freh5
brcm_freh6
brcm_freh10
brcm_freh11
freh7_b
FREXT01_JVC_D
FREXT02_JVC_C
FRExt2_Panasonic_C
FRExt4_Panasonic_B
HCAFF1_HHI_B
HCAMFF1_HHI_B
HCHP3_HHI_A
HPCAFL_BRCM_C
HPCAFLNL_BRCM_C
HVLCFI0_Sony_B
HVLCMFF0_Sony_B
HVLCPFF0_Sony_B
HPCAMAPALQ_BRCM_B
HPCVFL_BRCM_A
HPCVFLNL_BRCM_A
- 2 test vectors failed due to 10bit bitstream: 10bit decoding is not
supported in iris driver
Test Vectors:
FREH10-1
FREH10-2
- 21 test vectors failed due to unsupported profile:
V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 is not supported by the
hardware.
Test Vectors:
FREXT1_TANDBERG_A
FREXT2_TANDBERG_A
FREXT3_TANDBERG_A
Hi422FR1_SONY_A
Hi422FR2_SONY_A
Hi422FR3_SONY_A
Hi422FR4_SONY_A
Hi422FR6_SONY_A
Hi422FR7_SONY_A
Hi422FR8_SONY_A
Hi422FR9_SONY_A
Hi422FR10_SONY_A
Hi422FR11_SONY_A
Hi422FR12_SONY_A
Hi422FR13_SONY_A
Hi422FR14_SONY_A
Hi422FR15_SONY_A
Hi422FREXT16_SONY_A
Hi422FREXT17_SONY_A
Hi422FREXT18_SONY_A
Hi422FREXT19_SONY_A
- 2 test vectors failed due to unsupported bitstream.
chroma_fmt_idc is equal to 0(monochrome) in the bitstream which is not
supported by the hardware.
Test Vectors:
HPCAMOLQ_BRCM_B
HPCVMOLQ_BRCM_B
The result of fluster test on SM8250:
78/135 while testing JVT-AVC_V1 with
GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
The failing tests are:
- 52 test vectors failed due to interlaced clips: Interlaced decoding is
not supported in iris driver.
Test Vectors:
cabac_mot_fld0_full
cabac_mot_mbaff0_full
cabac_mot_picaff0_full
CABREF3_Sand_D
CAFI1_SVA_C
CAMA1_Sony_C
CAMA1_TOSHIBA_B
cama1_vtc_c
cama2_vtc_b
CAMA3_Sand_E
cama3_vtc_b
CAMACI3_Sony_C
CAMANL1_TOSHIBA_B
CAMANL2_TOSHIBA_B
CAMANL3_Sand_E
CAMASL3_Sony_B
CAMP_MOT_MBAFF_L30
CAMP_MOT_MBAFF_L31
CANLMA2_Sony_C
CANLMA3_Sony_C
CAPA1_TOSHIBA_B
CAPAMA3_Sand_F
cavlc_mot_fld0_full_B
cavlc_mot_mbaff0_full_B
cavlc_mot_picaff0_full_B
CVCANLMA2_Sony_C
CVFI1_Sony_D
CVFI1_SVA_C
CVFI2_Sony_H
CVFI2_SVA_C
CVMA1_Sony_D
CVMA1_TOSHIBA_B
CVMANL1_TOSHIBA_B
CVMANL2_TOSHIBA_B
CVMAPAQP3_Sony_E
CVMAQP2_Sony_G
CVMAQP3_Sony_D
CVMP_MOT_FLD_L30_B
CVNLFI1_Sony_C
CVNLFI2_Sony_H
CVPA1_TOSHIBA_B
FI1_Sony_E
MR6_BT_B
MR7_BT_B
MR8_BT_B
MR9_BT_B
Sharp_MP_Field_1_B
Sharp_MP_Field_2_B
Sharp_MP_Field_3_B
Sharp_MP_PAFF_1r2
Sharp_MP_PAFF_2r
CVMP_MOT_FRM_L31_B
- 3 test vectors failed due to unsupported bitstream.
num_slice_group_minus1 greater than zero is not supported by the
hardware.
Test Vectors:
FM1_BT_B
FM1_FT_E
FM2_SVA_C
- 2 test vectors failed because SP_SLICE type is not supported by the
hardware.
Test Vectors:
SP1_BT_A
sp2_bt_b
23/69 while testing JVT-FR-EXT with
GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
The failing tests are:
- 21 test vectors failed due to interlaced clips: Interlaced decoding is
not supported in iris driver.
Test Vectors:
brcm_freh4
brcm_freh5
brcm_freh6
brcm_freh10
brcm_freh11
freh7_b
FREXT01_JVC_D
FREXT02_JVC_C
FRExt2_Panasonic_C
FRExt4_Panasonic_B
HCAFF1_HHI_B
HCAMFF1_HHI_B
HCHP3_HHI_A
HPCAFL_BRCM_C
HPCAFLNL_BRCM_C
HVLCFI0_Sony_B
HVLCMFF0_Sony_B
HVLCPFF0_Sony_B
HPCAMAPALQ_BRCM_B
HPCVFL_BRCM_A
HPCVFLNL_BRCM_A
- 2 test vectors failed due to 10bit bitstream: 10bit decoding is not
supported in iris driver
Test Vectors:
FREH10-1
FREH10-2
- 21 test vectors failed due to unsupported profile:
V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 is not supported by the
hardware.
Test Vectors:
FREXT1_TANDBERG_A
FREXT2_TANDBERG_A
FREXT3_TANDBERG_A
Hi422FR1_SONY_A
Hi422FR2_SONY_A
Hi422FR3_SONY_A
Hi422FR4_SONY_A
Hi422FR6_SONY_A
Hi422FR7_SONY_A
Hi422FR8_SONY_A
Hi422FR9_SONY_A
Hi422FR10_SONY_A
Hi422FR11_SONY_A
Hi422FR12_SONY_A
Hi422FR13_SONY_A
Hi422FR14_SONY_A
Hi422FR15_SONY_A
Hi422FREXT16_SONY_A
Hi422FREXT17_SONY_A
Hi422FREXT18_SONY_A
Hi422FREXT19_SONY_A
- 2 test vectors failed due to unsupported bitstream.
chroma_fmt_idc is equal to 0(monochrome) in the bitstream which is not
supported by the hardware.
Test Vectors:
HPCAMOLQ_BRCM_B
HPCVMOLQ_BRCM_B
To: Vikash Garodia <quic_vgarodia@quicinc.com>
To: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Sebastian Fricke <sebastian.fricke@collabora.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Nicolas Dufresne <nicolas@ndufresne.ca>
Cc: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Cc: Jianhua Lu <lujianhua000@gmail.com>
Cc: linux-media@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
---
Dikshita Agarwal (18):
dt-bindings: media: Add video support for QCOM SM8550 SoC
media: iris: add platform driver for iris video device
media: iris: implement iris v4l2 file ops
media: iris: introduce iris core state management with shared queues
media: iris: implement video firmware load/unload
media: iris: implement boot sequence of the firmware
imedia: iris: introduce host firmware interface with necessary hooks
media: iris: implement power management
media: iris: implement reqbuf ioctl with vb2_queue_setup
media: iris: implement iris v4l2_ctrl_ops
media: iris: implement vb2 streaming ops
media: iris: allocate, initialize and queue internal buffers
media: iris: implement vb2 ops for buf_queue and firmware response
media: iris: add support for dynamic resolution change
media: iris: handle streamoff/on from client in dynamic resolution change
media: iris: add support for drain sequence
media: iris: enable video driver probe of SM8250 SoC
media: MAINTAINERS: add Qualcomm iris video accelerator driver
Vedang Nagar (10):
media: iris: implement s_fmt, g_fmt and try_fmt ioctls
media: iris: implement g_selection ioctl
media: iris: implement enum_fmt and enum_frameintervals ioctls
media: iris: implement subscribe_event and unsubscribe_event ioctls
media: iris: implement query_cap ioctl
media: iris: implement set properties to firmware during streamon
media: iris: subscribe parameters and properties to firmware for hfi_gen2
media: iris: add check whether the video session is supported or not
media: iris: implement power scaling for vpu2 and vpu3
media: iris: add check to allow sub states transitions
.../bindings/media/qcom,sm8550-iris.yaml | 158 ++++
MAINTAINERS | 10 +
drivers/media/platform/qcom/Kconfig | 1 +
drivers/media/platform/qcom/Makefile | 1 +
drivers/media/platform/qcom/iris/Kconfig | 13 +
drivers/media/platform/qcom/iris/Makefile | 27 +
drivers/media/platform/qcom/iris/iris_buffer.c | 625 ++++++++++++++
drivers/media/platform/qcom/iris/iris_buffer.h | 117 +++
drivers/media/platform/qcom/iris/iris_core.c | 96 +++
drivers/media/platform/qcom/iris/iris_core.h | 111 +++
drivers/media/platform/qcom/iris/iris_ctrls.c | 259 ++++++
drivers/media/platform/qcom/iris/iris_ctrls.h | 22 +
drivers/media/platform/qcom/iris/iris_firmware.c | 113 +++
drivers/media/platform/qcom/iris/iris_firmware.h | 15 +
drivers/media/platform/qcom/iris/iris_hfi_common.c | 176 ++++
drivers/media/platform/qcom/iris/iris_hfi_common.h | 155 ++++
drivers/media/platform/qcom/iris/iris_hfi_gen1.h | 16 +
.../platform/qcom/iris/iris_hfi_gen1_command.c | 826 ++++++++++++++++++
.../platform/qcom/iris/iris_hfi_gen1_defines.h | 448 ++++++++++
.../platform/qcom/iris/iris_hfi_gen1_response.c | 665 ++++++++++++++
drivers/media/platform/qcom/iris/iris_hfi_gen2.h | 41 +
.../platform/qcom/iris/iris_hfi_gen2_command.c | 957 +++++++++++++++++++++
.../platform/qcom/iris/iris_hfi_gen2_defines.h | 160 ++++
.../platform/qcom/iris/iris_hfi_gen2_packet.c | 292 +++++++
.../platform/qcom/iris/iris_hfi_gen2_packet.h | 125 +++
.../platform/qcom/iris/iris_hfi_gen2_response.c | 930 ++++++++++++++++++++
drivers/media/platform/qcom/iris/iris_hfi_queue.c | 314 +++++++
drivers/media/platform/qcom/iris/iris_hfi_queue.h | 180 ++++
drivers/media/platform/qcom/iris/iris_instance.h | 79 ++
.../platform/qcom/iris/iris_platform_common.h | 186 ++++
.../platform/qcom/iris/iris_platform_sm8250.c | 148 ++++
.../platform/qcom/iris/iris_platform_sm8550.c | 265 ++++++
drivers/media/platform/qcom/iris/iris_power.c | 140 +++
drivers/media/platform/qcom/iris/iris_power.h | 13 +
drivers/media/platform/qcom/iris/iris_probe.c | 379 ++++++++
drivers/media/platform/qcom/iris/iris_resources.c | 131 +++
drivers/media/platform/qcom/iris/iris_resources.h | 18 +
drivers/media/platform/qcom/iris/iris_state.c | 276 ++++++
drivers/media/platform/qcom/iris/iris_state.h | 144 ++++
drivers/media/platform/qcom/iris/iris_utils.c | 89 ++
drivers/media/platform/qcom/iris/iris_utils.h | 57 ++
drivers/media/platform/qcom/iris/iris_vb2.c | 364 ++++++++
drivers/media/platform/qcom/iris/iris_vb2.h | 19 +
drivers/media/platform/qcom/iris/iris_vdec.c | 676 +++++++++++++++
drivers/media/platform/qcom/iris/iris_vdec.h | 25 +
drivers/media/platform/qcom/iris/iris_vidc.c | 455 ++++++++++
drivers/media/platform/qcom/iris/iris_vidc.h | 15 +
drivers/media/platform/qcom/iris/iris_vpu2.c | 38 +
drivers/media/platform/qcom/iris/iris_vpu3.c | 122 +++
drivers/media/platform/qcom/iris/iris_vpu_buffer.c | 270 ++++++
drivers/media/platform/qcom/iris/iris_vpu_buffer.h | 91 ++
drivers/media/platform/qcom/iris/iris_vpu_common.c | 369 ++++++++
drivers/media/platform/qcom/iris/iris_vpu_common.h | 28 +
.../platform/qcom/iris/iris_vpu_register_defines.h | 17 +
54 files changed, 11267 insertions(+)
---
base-commit: 698b6e3163bafd61e1b7d13572e2c42974ac85ec
change-id: 20241028-qcom-video-iris-94d5a12e6d9e
Best regards,
--
Dikshita Agarwal <quic_dikshita@quicinc.com>