Add bindings for qcom,msm8953-camss in order to support the camera
subsystem for MSM8953/SDM450/SDM632.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
.../bindings/media/qcom,msm8953-camss.yaml | 323 +++++++++++++++++++++
1 file changed, 323 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..1d2236bc8d94ba81d8b993a105dc5d6a812c727e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
@@ -0,0 +1,323 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,msm8953-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+ - Barnabas Czeman <barnabas.czeman@mainlining.org>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+ compatible:
+ const: qcom,msm8953-camss
+
+ clocks:
+ minItems: 30
+ maxItems: 30
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: csi0
+ - const: csi0_ahb
+ - const: csi0_phy
+ - const: csi0_pix
+ - const: csi0_rdi
+ - const: csi1
+ - const: csi1_ahb
+ - const: csi1_phy
+ - const: csi1_pix
+ - const: csi1_rdi
+ - const: csi2
+ - const: csi2_ahb
+ - const: csi2_phy
+ - const: csi2_pix
+ - const: csi2_rdi
+ - const: csi_vfe0
+ - const: csi_vfe1
+ - const: csiphy0_timer
+ - const: csiphy1_timer
+ - const: csiphy2_timer
+ - const: ispif_ahb
+ - const: micro_ahb
+ - const: top_ahb
+ - const: vfe0
+ - const: vfe0_ahb
+ - const: vfe0_axi
+ - const: vfe1
+ - const: vfe1_ahb
+ - const: vfe1_axi
+
+ interrupts:
+ minItems: 9
+ maxItems: 9
+
+ interrupt-names:
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: ispif
+ - const: vfe0
+ - const: vfe1
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ items:
+ - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller.
+ - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller.
+
+ power-domain-names:
+ items:
+ - const: vfe0
+ - const: vfe1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description:
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported. Physical lane indexes;
+ 0, 2, 3, 4.
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - data-lanes
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - data-lanes
+
+ reg:
+ minItems: 13
+ maxItems: 13
+
+ reg-names:
+ items:
+ - const: csi_clk_mux
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csiphy0
+ - const: csiphy0_clk_mux
+ - const: csiphy1
+ - const: csiphy1_clk_mux
+ - const: csiphy2
+ - const: csiphy2_clk_mux
+ - const: ispif
+ - const: vfe0
+ - const: vfe1
+
+ vdda-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - iommus
+ - power-domains
+ - power-domain-names
+ - vdda-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-msm8953.h>
+
+ camss: camss@1b00000 {
+ compatible = "qcom,msm8953-camss";
+
+ reg = <0x1b00020 0x10>,
+ <0x1b30000 0x100>,
+ <0x1b30400 0x100>,
+ <0x1b30800 0x100>,
+ <0x1b34000 0x1000>,
+ <0x1b00030 0x4>,
+ <0x1b35000 0x1000>,
+ <0x1b00038 0x4>,
+ <0x1b36000 0x1000>,
+ <0x1b00040 0x4>,
+ <0x1b31000 0x500>,
+ <0x1b10000 0x1000>,
+ <0x1b14000 0x1000>;
+ reg-names = "csi_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "ispif",
+ "vfe0",
+ "vfe1";
+
+ clocks = <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI2_CLK>,
+ <&gcc GCC_CAMSS_CSI2_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI2PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI2PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI2RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE1_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI2PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_MICRO_AHB_CLK>,
+ <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE0_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_AXI_CLK>,
+ <&gcc GCC_CAMSS_VFE1_CLK>,
+ <&gcc GCC_CAMSS_VFE1_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE1_AXI_CLK>;
+ clock-names = "ahb",
+ "csi0",
+ "csi0_ahb",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1",
+ "csi1_ahb",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2",
+ "csi2_ahb",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi_vfe0",
+ "csi_vfe1",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "ispif_ahb",
+ "micro_ahb",
+ "top_ahb",
+ "vfe0",
+ "vfe0_ahb",
+ "vfe0_axi",
+ "vfe1",
+ "vfe1_ahb",
+ "vfe1_axi";
+
+ interrupts = <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "ispif",
+ "vfe0",
+ "vfe1";
+
+ iommus = <&apps_iommu 0x14>;
+
+ power-domains = <&gcc VFE0_GDSC>,
+ <&gcc VFE1_GDSC>;
+ power-domain-names = "vfe0", "vfe1";
+
+ vdda-supply = <®_2v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
--
2.47.0
On Sat, Nov 02, 2024 at 02:32:29AM +0100, Barnabás Czémán wrote: > Add bindings for qcom,msm8953-camss in order to support the camera > subsystem for MSM8953/SDM450/SDM632. > Also: A nit, subject: drop second/last, redundant "binding". The "dt-bindings" prefix is already stating that these are bindings. See also: https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18 Best regards, Krzysztof
On Sat, Nov 02, 2024 at 02:32:29AM +0100, Barnabás Czémán wrote:
> Add bindings for qcom,msm8953-camss in order to support the camera
> subsystem for MSM8953/SDM450/SDM632.
>
subject: only one media prefix, the first one.
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
> .../bindings/media/qcom,msm8953-camss.yaml | 323 +++++++++++++++++++++
> 1 file changed, 323 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..1d2236bc8d94ba81d8b993a105dc5d6a812c727e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
> @@ -0,0 +1,323 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
Drop blank line
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,msm8953-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm CAMSS ISP
All CAMSS? Or only MSM8953?
> +
> +maintainers:
> + - Barnabas Czeman <barnabas.czeman@mainlining.org>
> +
> +description: |
Do not need '|' unless you need to preserve formatting.
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> + compatible:
> + const: qcom,msm8953-camss
> +
> + clocks:
> + minItems: 30
> + maxItems: 30
> +
> + clock-names:
> + items:
> + - const: ahb
> + - const: csi0
> + - const: csi0_ahb
> + - const: csi0_phy
> + - const: csi0_pix
> + - const: csi0_rdi
> + - const: csi1
> + - const: csi1_ahb
> + - const: csi1_phy
> + - const: csi1_pix
> + - const: csi1_rdi
> + - const: csi2
> + - const: csi2_ahb
> + - const: csi2_phy
> + - const: csi2_pix
> + - const: csi2_rdi
> + - const: csi_vfe0
> + - const: csi_vfe1
> + - const: csiphy0_timer
> + - const: csiphy1_timer
> + - const: csiphy2_timer
> + - const: ispif_ahb
> + - const: micro_ahb
> + - const: top_ahb
> + - const: vfe0
> + - const: vfe0_ahb
> + - const: vfe0_axi
> + - const: vfe1
> + - const: vfe1_ahb
> + - const: vfe1_axi
> +
> + interrupts:
> + minItems: 9
> + maxItems: 9
> +
> + interrupt-names:
> + items:
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: ispif
> + - const: vfe0
> + - const: vfe1
> +
> + iommus:
> + maxItems: 1
> +
> + power-domains:
> + items:
> + - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller.
> + - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller.
> +
> + power-domain-names:
> + items:
> + - const: vfe0
> + - const: vfe1
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + description:
> + CSI input ports.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + description:
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index. Lane swapping
> + is supported. Physical lane indexes;
> + 0, 2, 3, 4.
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - data-lanes
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - data-lanes
> +
> + reg:
> + minItems: 13
> + maxItems: 13
> +
> + reg-names:
> + items:
> + - const: csi_clk_mux
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csiphy0
> + - const: csiphy0_clk_mux
> + - const: csiphy1
> + - const: csiphy1_clk_mux
> + - const: csiphy2
> + - const: csiphy2_clk_mux
> + - const: ispif
> + - const: vfe0
> + - const: vfe1
> +
> + vdda-supply:
> + description:
> + Definition of the regulator used as analog power supply.
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-names
> + - iommus
> + - power-domains
> + - power-domain-names
> + - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-msm8953.h>
> +
> + camss: camss@1b00000 {
> + compatible = "qcom,msm8953-camss";
> +
> + reg = <0x1b00020 0x10>,
Your DTS was not tested :/. Mismatched unit address.
See Soc maintainer profiles about W=1 checks. Do not use us for such
review, but tools.
Best regards,
Krzysztof
On 02/11/2024 01:32, Barnabás Czémán wrote: > Add bindings for qcom,msm8953-camss in order to support the camera > subsystem for MSM8953/SDM450/SDM632. > > Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> > --- > .../bindings/media/qcom,msm8953-camss.yaml | 323 +++++++++++++++++++++ This looks better. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
© 2016 - 2026 Red Hat, Inc.