On Fri, 1 Nov 2024 13:23:52 +0200
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:
> Add support for AD485X fully buffered, 8-channel simultaneous sampling,
> 16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide
> common-mode range inputs.
>
> Some particularities:
> 1. softspan - the devices support multiple softspans which are represented in iio
> through offset/scale. The current handling implies changing both
> the scale and the offset separately via IIO, therefore in order to
> properly set the softspan, each time the offset changes the softspan
> is set to the default value. And only after changing also the scale
> the desired softspan is set. This is the approach we are suggesting
> since we need the softspan configurable from userspace and not from
> devicetree.
>
> 2. packet format - Data provided on the CMOS and LVDS conversion data output buses
> are packaged into eight channel packets. This is currently handled
> as extended info.
For future cases. The cover letter should have the version numbers as well as the
patches.
Also, the cover letter title should be similar to the patches.
[PATCH V5 0/7] iio: adc: Add ad485x driver.
How did we get this far with wild cards in file names?
In IIO we always name after a particular part (there are a few historical drivers
that don't). Using wild cards goes wrong far too often. So rename the file as
ad4841.c + same for the dt binding file and documentation file.
Jonathan
>
> Antoniu Miclaus (7):
> iio: backend: add API for interface get
> iio: backend: add support for data size set
> iio: adc: adi-axi-adc: add interface type
> iio: adc: adi-axi-adc: set data format
> dt-bindings: iio: adc: add ad458x
> iio: adc: ad485x: add ad485x driver
> Documentation: ABI: testing: ad485x: add ABI docs
>
> .../ABI/testing/sysfs-bus-iio-adc-ad485x | 14 +
> .../bindings/iio/adc/adi,ad485x.yaml | 82 ++
> drivers/iio/adc/Kconfig | 12 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/ad485x.c | 1061 +++++++++++++++++
> drivers/iio/adc/adi-axi-adc.c | 44 +
> drivers/iio/industrialio-backend.c | 45 +
> include/linux/iio/backend.h | 13 +
> 8 files changed, 1272 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad485x
> create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad485x.yaml
> create mode 100644 drivers/iio/adc/ad485x.c
>