If the vendor drivers can detect the Link up event using mechanisms
such as Link up IRQ, then waiting for Link up during probe is not
needed. if the drivers can be notified when the link comes up,
vendor driver can enumerate downstream devices instead of waiting
here, which optimizes the boot time.
So skip waiting for link to be up if the driver supports 'linkup_irq'.
Currently, only Qcom RC driver supports the 'linkup_irq' as it can detect
the Link Up event using its own 'global IRQ' interrupt. So set
'linkup_irq' flag for QCOM drivers.
As part of the PCIe link up event, the ICC and OPP values are updated.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
---
Changes in v3:
- seperate dwc changes and qcom changes as suggested (mani)
- update commit & comments as suggested (mani & bjorn)
Changes in v2:
- Updated the bypass_link_up_wait name to linkup_irq & added comment as
suggested (mani).
- seperated the icc and opp update patch (mani).
- Link to v1: https://lore.kernel.org/r/20240917-remove_wait-v1-1-456d2551bc50@quicinc.com
---
Krishna chaitanya chundru (3):
PCI: dwc: Skip waiting for link up if vendor drivers can detect Link up event
PCI: qcom: Set linkup_irq if global IRQ handler is present
PCI: qcom: Update ICC and OPP values during link up event
drivers/pci/controller/dwc/pcie-designware-host.c | 10 ++++++++--
drivers/pci/controller/dwc/pcie-designware.h | 1 +
drivers/pci/controller/dwc/pcie-qcom.c | 7 ++++++-
3 files changed, 15 insertions(+), 3 deletions(-)
---
base-commit: 070f00ffd0bac88ed5e874c9ae0378f75e2203f3
change-id: 20241101-remove_wait-80ad43547a44
Best regards,
--
Krishna chaitanya chundru <quic_krichai@quicinc.com>