Variable cci_clk_rate is not effectively used, so delete it.

drivers/i2c/busses/i2c-qcom-cci.c:526:16: warning: variable ‘cci_clk_rate’ set but not used.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11532
Fixes: 823dfb7bdb21 ("i2c: qcom-cci: Stop complaining about DT set clock rate")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
---
Changes in v3:
  -Modify the commit message.

 drivers/i2c/busses/i2c-qcom-cci.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
index 5cc791b3b57d..a0ef43e99751 100644
--- a/drivers/i2c/busses/i2c-qcom-cci.c
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -523,7 +523,6 @@ static const struct dev_pm_ops qcom_cci_pm = {
 static int cci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	unsigned long cci_clk_rate = 0;
 	struct device_node *child;
 	struct resource *r;
 	struct cci *cci;
@@ -594,14 +593,6 @@ static int cci_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, -EINVAL, "not enough clocks in DT\n");
 	cci->nclocks = ret;
 
-	/* Retrieve CCI clock rate */
-	for (i = 0; i < cci->nclocks; i++) {
-		if (!strcmp(cci->clocks[i].id, "cci")) {
-			cci_clk_rate = clk_get_rate(cci->clocks[i].clk);
-			break;
-		}
-	}
-
 	ret = cci_enable_clocks(cci);
 	if (ret < 0)
 		return ret;
-- 
2.32.0.3.g01195cf9f

On Thu, Oct 31, 2024 at 05:53:39PM +0800, Jiapeng Chong wrote:
> Variable cci_clk_rate is not effectively used, so delete it.
> 
> drivers/i2c/busses/i2c-qcom-cci.c:526:16: warning: variable ‘cci_clk_rate’ set but not used.
> 
> Reported-by: Abaci Robot <abaci@linux.alibaba.com>
> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11532
> Fixes: 823dfb7bdb21 ("i2c: qcom-cci: Stop complaining about DT set clock rate")
> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
> ---
> Changes in v3:
>   -Modify the commit message.

Modify how?
What was the reason for ignoring the R-B tag?

> 
>  drivers/i2c/busses/i2c-qcom-cci.c | 9 ---------
>  1 file changed, 9 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
> index 5cc791b3b57d..a0ef43e99751 100644
> --- a/drivers/i2c/busses/i2c-qcom-cci.c
> +++ b/drivers/i2c/busses/i2c-qcom-cci.c
> @@ -523,7 +523,6 @@ static const struct dev_pm_ops qcom_cci_pm = {
>  static int cci_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> -	unsigned long cci_clk_rate = 0;
>  	struct device_node *child;
>  	struct resource *r;
>  	struct cci *cci;
> @@ -594,14 +593,6 @@ static int cci_probe(struct platform_device *pdev)
>  		return dev_err_probe(dev, -EINVAL, "not enough clocks in DT\n");
>  	cci->nclocks = ret;
>  
> -	/* Retrieve CCI clock rate */
> -	for (i = 0; i < cci->nclocks; i++) {
> -		if (!strcmp(cci->clocks[i].id, "cci")) {
> -			cci_clk_rate = clk_get_rate(cci->clocks[i].clk);
> -			break;
> -		}
> -	}
> -
>  	ret = cci_enable_clocks(cci);
>  	if (ret < 0)
>  		return ret;
> -- 
> 2.32.0.3.g01195cf9f
> 

-- 
With best wishes
Dmitry

Hi Dmitry,

On Thu, Oct 31, 2024 at 06:51:13PM +0200, Dmitry Baryshkov wrote:
> On Thu, Oct 31, 2024 at 05:53:39PM +0800, Jiapeng Chong wrote:
> > Variable cci_clk_rate is not effectively used, so delete it.
> > 
> > drivers/i2c/busses/i2c-qcom-cci.c:526:16: warning: variable ‘cci_clk_rate’ set but not used.
> > 
> > Reported-by: Abaci Robot <abaci@linux.alibaba.com>
> > Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11532
> > Fixes: 823dfb7bdb21 ("i2c: qcom-cci: Stop complaining about DT set clock rate")
> > Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
> > ---
> > Changes in v3:
> >   -Modify the commit message.
> 
> Modify how?
> What was the reason for ignoring the R-B tag?

This patch has already been taken and I have added the R-B's as
they were given.

However, Jiapeng, please, next time try to be a bit more specific
with the changelog, consider that people really read it.

Andi