On Thu, Oct 31, 2024 at 04:06:49PM +0800, Richard Zhu wrote:
> i.MX7D only has one PCIe controller, so controller_id should always be 0.
> The previous code is incorrect although yielding the correct result. Fix by
> removing IMX7D from the switch case branch.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
You can simple mention previous discussion here.
Converience for reviewer, and past previous discission here.
"This is just *wrong*. You cannot hardcode the MMIO address in the driver. Even
though this code is old, you should fix it instead of building on top of it.
- Mani"
IMX7D here is wrong athough check IMX8MQ_PCIE2_BASE_ADDR is not good
method. Previously try to use 'linux,pci-domain' to replace this check
logic. Need more discussion to improve it and keep old compatiblity. Let's
fix this code error firstly.
Frank
> drivers/pci/controller/dwc/pci-imx6.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index d21f7d2e79dc..7479d3253f20 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1344,7 +1344,6 @@ static int imx_pcie_probe(struct platform_device *pdev)
> switch (imx_pcie->drvdata->variant) {
> case IMX8MQ:
> case IMX8MQ_EP:
> - case IMX7D:
> if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> imx_pcie->controller_id = 1;
> break;
> --
> 2.37.1
>