[v2] sunxi: A100/A133 second stage support

[PATCH v2 07/13] arm64: allwinner: A100: enable EHCI, OHCI and USB PHY nodes in Perf1

Posted by Cody Eksal 3 weeks, 3 days ago

From: Yangtao Li <frank@allwinnertech.com>

Add USB support on A100 perf1 board, which include two USB2.0 port.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
---
Changes in V2:
 - Add dr_mode here, instead of in the .dtsi

 .../allwinner/sun50i-a100-allwinner-perf1.dts | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
index f5c5c1464482..2f8c7ee60283 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
@@ -7,6 +7,8 @@
 
 #include "sun50i-a100.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 /{
 	model = "Allwinner A100 Perf1";
 	compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100";
@@ -18,6 +20,36 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
 };
 
 &pio {
@@ -178,3 +210,10 @@ &uart0 {
 	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
-- 
2.47.0

Re: [PATCH v2 07/13] arm64: allwinner: A100: enable EHCI, OHCI and USB PHY nodes in Perf1

Posted by Chen-Yu Tsai 3 weeks, 1 day ago

On Thu, Oct 31, 2024 at 3:03 PM Cody Eksal <masterr3c0rd@epochal.quest> wrote:
>
> From: Yangtao Li <frank@allwinnertech.com>
>
> Add USB support on A100 perf1 board, which include two USB2.0 port.
>
> Signed-off-by: Yangtao Li <frank@allwinnertech.com>
> Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
> ---
> Changes in V2:
>  - Add dr_mode here, instead of in the .dtsi
>
>  .../allwinner/sun50i-a100-allwinner-perf1.dts | 39 +++++++++++++++++++
>  1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
> index f5c5c1464482..2f8c7ee60283 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
> @@ -7,6 +7,8 @@
>
>  #include "sun50i-a100.dtsi"
>
> +#include <dt-bindings/gpio/gpio.h>
> +
>  /{
>         model = "Allwinner A100 Perf1";
>         compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100";
> @@ -18,6 +20,36 @@ aliases {
>         chosen {
>                 stdout-path = "serial0:115200n8";
>         };
> +
> +       reg_usb1_vbus: usb1-vbus {
> +               compatible = "regulator-fixed";
> +               regulator-name = "usb1-vbus";
> +               regulator-min-microvolt = <5000000>;
> +               regulator-max-microvolt = <5000000>;
> +               gpio = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
> +               enable-active-high;
> +       };
> +};
> +
> +&ehci0 {
> +       status = "okay";
> +};
> +
> +&ehci1 {
> +       status = "okay";
> +};
> +
> +&ohci0 {
> +       status = "okay";
> +};
> +
> +&ohci1 {
> +       status = "okay";
> +};
> +
> +&usb_otg {
> +       dr_mode = "otg";
> +       status = "okay";

Since you noted in the previous patch that OTG doesn't work if OHCI0/EHCI0
are enabled and probed before musb, maybe we should keep them disabled
for the time being?

You could leave a TODO item above the &usb_otg node.

ChenYu

>  };
>
>  &pio {
> @@ -178,3 +210,10 @@ &uart0 {
>         pinctrl-0 = <&uart0_pb_pins>;
>         status = "okay";
>  };
> +
> +&usbphy {
> +       usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
> +       usb0_vbus-supply = <&reg_drivevbus>;
> +       usb1_vbus-supply = <&reg_usb1_vbus>;
> +       status = "okay";
> +};
> --
> 2.47.0
>