Add LLCC configuration for the QCS8300 platform. There is an errata on
LB_CNT information on QCS8300 platform, hardcode num_banks to get the
correct value.

Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
---
 drivers/soc/qcom/llcc-qcom.c | 67 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 783545b22aaa..61b91939aae4 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -2629,6 +2629,56 @@ static const struct llcc_slice_config sm8650_data[] = {
 	},
 };
 
+static const struct llcc_slice_config qcs8300_data[] = {
+	{
+		.usecase_id = LLCC_GPUHTW,
+		.slice_id = 11,
+		.max_cap = 128,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0xf,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_GPU,
+		.slice_id = 12,
+		.max_cap = 512,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0xf,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+		.write_scid_en = true,
+	}, {
+		.usecase_id = LLCC_MMUHWT,
+		.slice_id = 13,
+		.max_cap = 128,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0xf,
+		.cache_mode = 0,
+		.activate_on_init = true,
+	}, {
+		.usecase_id = LLCC_ECC,
+		.slice_id = 26,
+		.max_cap = 256,
+		.priority = 3,
+		.fixed_size = true,
+		.bonus_ways = 0xf,
+		.cache_mode = 0,
+		.activate_on_init = true,
+	}, {
+		.usecase_id = LLCC_WRCACHE,
+		.slice_id = 31,
+		.max_cap = 128,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0xf,
+		.cache_mode = 0,
+		.activate_on_init = true,
+	},
+};
+
 static const struct llcc_slice_config qdu1000_data_2ch[] = {
 	{
 		.usecase_id = LLCC_MDMHPGRW,
@@ -3050,6 +3100,17 @@ static const u32 llcc_v2_1_reg_offset[] = {
 	[LLCC_COMMON_STATUS0]	= 0x0003400c,
 };
 
+static const struct qcom_llcc_config qcs8300_cfg[] = {
+	{
+		.sct_data	= qcs8300_data,
+		.size		= ARRAY_SIZE(qcs8300_data),
+		.need_llcc_cfg	= true,
+		.reg_offset	= llcc_v2_1_reg_offset,
+		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+		.num_banks	= 4,
+	},
+};
+
 static const struct qcom_llcc_config qdu1000_cfg[] = {
 	{
 		.sct_data       = qdu1000_data_8ch,
@@ -3257,6 +3318,11 @@ static const struct qcom_llcc_config x1e80100_cfg[] = {
 	},
 };
 
+static const struct qcom_sct_config qcs8300_cfgs = {
+	.llcc_config	= qcs8300_cfg,
+	.num_config	= ARRAY_SIZE(qcs8300_cfg),
+};
+
 static const struct qcom_sct_config qdu1000_cfgs = {
 	.llcc_config	= qdu1000_cfg,
 	.num_config	= ARRAY_SIZE(qdu1000_cfg),
@@ -3930,6 +3996,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id qcom_llcc_of_match[] = {
+	{ .compatible = "qcom,qcs8300-llcc", .data = &qcs8300_cfgs},
 	{ .compatible = "qcom,qdu1000-llcc", .data = &qdu1000_cfgs},
 	{ .compatible = "qcom,sa8775p-llcc", .data = &sa8775p_cfgs },
 	{ .compatible = "qcom,sar1130p-llcc", .data = &sar1130p_cfgs },

-- 
2.25.1

On 31.10.2024 8:14 AM, Jingyi Wang wrote:
> Add LLCC configuration for the QCS8300 platform. There is an errata on
> LB_CNT information on QCS8300 platform, hardcode num_banks to get the
> correct value.
> 
> Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad