Convert the AXI DMAC bindings from .txt to .yaml.
Acked-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
For the maintainer, Lars is the original author, but isn't really
active with ADI anymore, so I have added Nuno instead since he is the
most active ADI representative currently and is knowledgeable about this
hardware.
As in v1, the rob-bot is likely to complain with the following:
Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml: properties:adi,channels:type: 'boolean' was expected
hint: A vendor boolean property can use "type: boolean"
from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
DTC [C] Documentation/devicetree/bindings/dma/adi,axi-dmac.example.dtb
This is due to the fact that we have a vendor prefix on an object node.
We can't change that since it is an existing binding. Rob said he will
fix this in dtschema.
---
.../devicetree/bindings/dma/adi,axi-dmac.txt | 61 ---------
.../devicetree/bindings/dma/adi,axi-dmac.yaml | 139 +++++++++++++++++++++
2 files changed, 139 insertions(+), 61 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
deleted file mode 100644
index cd17684aaab5..000000000000
--- a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Analog Devices AXI-DMAC DMA controller
-
-Required properties:
- - compatible: Must be "adi,axi-dmac-1.00.a".
- - reg: Specification for the controllers memory mapped register map.
- - interrupts: Specification for the controllers interrupt.
- - clocks: Phandle and specifier to the controllers AXI interface clock
- - #dma-cells: Must be 1.
-
-Required sub-nodes:
- - adi,channels: This sub-node must contain a sub-node for each DMA channel. For
- the channel sub-nodes the following bindings apply. They must match the
- configuration options of the peripheral as it was instantiated.
-
-Required properties for adi,channels sub-node:
- - #size-cells: Must be 0
- - #address-cells: Must be 1
-
-Required channel sub-node properties:
- - reg: Which channel this node refers to.
- - adi,source-bus-width,
- adi,destination-bus-width: Width of the source or destination bus in bits.
- - adi,source-bus-type,
- adi,destination-bus-type: Type of the source or destination bus. Must be one
- of the following:
- 0 (AXI_DMAC_TYPE_AXI_MM): Memory mapped AXI interface
- 1 (AXI_DMAC_TYPE_AXI_STREAM): Streaming AXI interface
- 2 (AXI_DMAC_TYPE_AXI_FIFO): FIFO interface
-
-Deprecated optional channel properties:
- - adi,length-width: Width of the DMA transfer length register.
- - adi,cyclic: Must be set if the channel supports hardware cyclic DMA
- transfers.
- - adi,2d: Must be set if the channel supports hardware 2D DMA transfers.
-
-DMA clients connected to the AXI-DMAC DMA controller must use the format
-described in the dma.txt file using a one-cell specifier. The value of the
-specifier refers to the DMA channel index.
-
-Example:
-
-dma: dma@7c420000 {
- compatible = "adi,axi-dmac-1.00.a";
- reg = <0x7c420000 0x10000>;
- interrupts = <0 57 0>;
- clocks = <&clkc 16>;
- #dma-cells = <1>;
-
- adi,channels {
- #size-cells = <0>;
- #address-cells = <1>;
-
- dma-channel@0 {
- reg = <0>;
- adi,source-bus-width = <32>;
- adi,source-bus-type = <ADI_AXI_DMAC_TYPE_MM_AXI>;
- adi,destination-bus-width = <64>;
- adi,destination-bus-type = <ADI_AXI_DMAC_TYPE_FIFO>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml b/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml
new file mode 100644
index 000000000000..b1f4bdcab4fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/adi,axi-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI-DMAC DMA controller
+
+description: |
+ FPGA-based DMA controller designed for use with high-speed converter hardware.
+
+ http://analogdevicesinc.github.io/hdl/library/axi_dmac/index.html
+
+maintainers:
+ - Nuno Sa <nuno.sa@analog.com>
+
+additionalProperties: false
+
+properties:
+ compatible:
+ const: adi,axi-dmac-1.00.a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#dma-cells":
+ const: 1
+
+ adi,channels:
+ type: object
+ description: This sub-node must contain a sub-node for each DMA channel.
+ additionalProperties: false
+
+ properties:
+ "#size-cells":
+ const: 0
+ "#address-cells":
+ const: 1
+
+ patternProperties:
+ "^dma-channel@[0-9a-f]+$":
+ type: object
+ description:
+ DMA channel properties based on HDL compile-time configuration.
+ additionalProperties: false
+
+ properties:
+ reg:
+ maxItems: 1
+
+ adi,source-bus-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Width of the source bus in bits.
+ enum: [8, 16, 32, 64, 128]
+
+ adi,destination-bus-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Width of the destination bus in bits.
+ enum: [8, 16, 32, 64, 128]
+
+ adi,source-bus-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Type of the source bus.
+
+ 0: Memory mapped AXI interface
+ 1: Streaming AXI interface
+ 2: FIFO interface
+ enum: [0, 1, 2]
+
+ adi,destination-bus-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Type of the destination bus (see adi,source-bus-type).
+ enum: [0, 1, 2]
+
+ adi,length-width:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Width of the DMA transfer length register.
+
+ adi,cyclic:
+ deprecated: true
+ type: boolean
+ description:
+ Must be set if the channel supports hardware cyclic DMA transfers.
+
+ adi,2d:
+ deprecated: true
+ type: boolean
+ description:
+ Must be set if the channel supports hardware 2D DMA transfers.
+
+ required:
+ - reg
+ - adi,source-bus-width
+ - adi,destination-bus-width
+ - adi,source-bus-type
+ - adi,destination-bus-type
+
+ required:
+ - "#size-cells"
+ - "#address-cells"
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - "#dma-cells"
+ - adi,channels
+
+examples:
+ - |
+ dma-controller@7c420000 {
+ compatible = "adi,axi-dmac-1.00.a";
+ reg = <0x7c420000 0x10000>;
+ interrupts = <0 57 0>;
+ clocks = <&clkc 16>;
+ #dma-cells = <1>;
+
+ adi,channels {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ dma-channel@0 {
+ reg = <0>;
+ adi,source-bus-width = <32>;
+ adi,source-bus-type = <0>; /* Memory mapped */
+ adi,destination-bus-width = <64>;
+ adi,destination-bus-type = <2>; /* FIFO */
+ };
+ };
+ };
--
2.43.0On Tue, 29 Oct 2024 14:29:14 -0500, David Lechner wrote: > Convert the AXI DMAC bindings from .txt to .yaml. > > Acked-by: Nuno Sa <nuno.sa@analog.com> > Signed-off-by: David Lechner <dlechner@baylibre.com> > --- > > For the maintainer, Lars is the original author, but isn't really > active with ADI anymore, so I have added Nuno instead since he is the > most active ADI representative currently and is knowledgeable about this > hardware. > > As in v1, the rob-bot is likely to complain with the following: > > Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml: properties:adi,channels:type: 'boolean' was expected > hint: A vendor boolean property can use "type: boolean" > from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# > DTC [C] Documentation/devicetree/bindings/dma/adi,axi-dmac.example.dtb > > This is due to the fact that we have a vendor prefix on an object node. > We can't change that since it is an existing binding. Rob said he will > fix this in dtschema. > --- > .../devicetree/bindings/dma/adi,axi-dmac.txt | 61 --------- > .../devicetree/bindings/dma/adi,axi-dmac.yaml | 139 +++++++++++++++++++++ > 2 files changed, 139 insertions(+), 61 deletions(-) > Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
On Tue, 29 Oct 2024 14:29:14 -0500, David Lechner wrote: > Convert the AXI DMAC bindings from .txt to .yaml. > > Acked-by: Nuno Sa <nuno.sa@analog.com> > Signed-off-by: David Lechner <dlechner@baylibre.com> > --- > > For the maintainer, Lars is the original author, but isn't really > active with ADI anymore, so I have added Nuno instead since he is the > most active ADI representative currently and is knowledgeable about this > hardware. > > As in v1, the rob-bot is likely to complain with the following: > > Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml: properties:adi,channels:type: 'boolean' was expected > hint: A vendor boolean property can use "type: boolean" > from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# > DTC [C] Documentation/devicetree/bindings/dma/adi,axi-dmac.example.dtb > > This is due to the fact that we have a vendor prefix on an object node. > We can't change that since it is an existing binding. Rob said he will > fix this in dtschema. > --- > .../devicetree/bindings/dma/adi,axi-dmac.txt | 61 --------- > .../devicetree/bindings/dma/adi,axi-dmac.yaml | 139 +++++++++++++++++++++ > 2 files changed, 139 insertions(+), 61 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml: properties:adi,channels:type: 'boolean' was expected hint: A vendor boolean property can use "type: boolean" from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241029-axi-dma-dt-yaml-v2-1-52a6ec7df251@baylibre.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
© 2016 - 2024 Red Hat, Inc.