Relocate the atomic_threshold field to scmi_desc and move the related code
to scmi_transport_setup.

No functional change.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
v2 --> v3
- fixed format string using %u instead of %d
---
 drivers/firmware/arm_scmi/common.h |  7 +++++++
 drivers/firmware/arm_scmi/driver.c | 25 +++++++++----------------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index cb39b6bbcffd..48b12f81141d 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -229,6 +229,12 @@ struct scmi_transport_ops {
  *	be pending simultaneously in the system. May be overridden by the
  *	get_max_msg op.
  * @max_msg_size: Maximum size of data payload per message that can be handled.
+ * @atomic_threshold: Optional system wide DT-configured threshold, expressed
+ *		      in microseconds, for atomic operations.
+ *		      Only SCMI synchronous commands reported by the platform
+ *		      to have an execution latency lesser-equal to the threshold
+ *		      should be considered for atomic mode operation: such
+ *		      decision is finally left up to the SCMI drivers.
  * @force_polling: Flag to force this whole transport to use SCMI core polling
  *		   mechanism instead of completion interrupts even if available.
  * @sync_cmds_completed_on_ret: Flag to indicate that the transport assures
@@ -247,6 +253,7 @@ struct scmi_desc {
 	int max_rx_timeout_ms;
 	int max_msg;
 	int max_msg_size;
+	unsigned int atomic_threshold;
 	const bool force_polling;
 	const bool sync_cmds_completed_on_ret;
 	const bool atomic_enabled;
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index b9a1d8c1034f..9bc1bb7caa55 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -149,12 +149,6 @@ struct scmi_debug_info {
  *		   base protocol
  * @active_protocols: IDR storing device_nodes for protocols actually defined
  *		      in the DT and confirmed as implemented by fw.
- * @atomic_threshold: Optional system wide DT-configured threshold, expressed
- *		      in microseconds, for atomic operations.
- *		      Only SCMI synchronous commands reported by the platform
- *		      to have an execution latency lesser-equal to the threshold
- *		      should be considered for atomic mode operation: such
- *		      decision is finally left up to the SCMI drivers.
  * @notify_priv: Pointer to private data structure specific to notifications.
  * @node: List head
  * @users: Number of users of this instance
@@ -180,7 +174,6 @@ struct scmi_info {
 	struct mutex protocols_mtx;
 	u8 *protocols_imp;
 	struct idr active_protocols;
-	unsigned int atomic_threshold;
 	void *notify_priv;
 	struct list_head node;
 	int users;
@@ -2445,7 +2438,7 @@ static bool scmi_is_transport_atomic(const struct scmi_handle *handle,
 	ret = info->desc->atomic_enabled &&
 		is_transport_polling_capable(info->desc);
 	if (ret && atomic_threshold)
-		*atomic_threshold = info->atomic_threshold;
+		*atomic_threshold = info->desc->atomic_threshold;
 
 	return ret;
 }
@@ -2959,7 +2952,7 @@ static struct scmi_debug_info *scmi_debugfs_common_setup(struct scmi_info *info)
 			   (char **)&dbg->name);
 
 	debugfs_create_u32("atomic_threshold_us", 0400, top_dentry,
-			   &info->atomic_threshold);
+			   (u32 *)&info->desc->atomic_threshold);
 
 	debugfs_create_str("type", 0400, trans, (char **)&dbg->type);
 
@@ -3071,6 +3064,13 @@ static const struct scmi_desc *scmi_transport_setup(struct device *dev)
 		 trans->desc->max_rx_timeout_ms, trans->desc->max_msg_size,
 		 trans->desc->max_msg);
 
+	/* System wide atomic threshold for atomic ops .. if any */
+	if (!of_property_read_u32(dev->of_node, "atomic-threshold-us",
+				  &trans->desc->atomic_threshold))
+		dev_info(dev,
+			 "SCMI System wide atomic threshold set to %u us\n",
+			 trans->desc->atomic_threshold);
+
 	return trans->desc;
 }
 
@@ -3120,13 +3120,6 @@ static int scmi_probe(struct platform_device *pdev)
 	handle->devm_protocol_acquire = scmi_devm_protocol_acquire;
 	handle->devm_protocol_get = scmi_devm_protocol_get;
 	handle->devm_protocol_put = scmi_devm_protocol_put;
-
-	/* System wide atomic threshold for atomic ops .. if any */
-	if (!of_property_read_u32(np, "atomic-threshold-us",
-				  &info->atomic_threshold))
-		dev_info(dev,
-			 "SCMI System wide atomic threshold set to %d us\n",
-			 info->atomic_threshold);
 	handle->is_transport_atomic = scmi_is_transport_atomic;
 
 	/* Setup all channels described in the DT at first */
-- 
2.47.0