arch/powerpc/kvm/book3s_hv.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
Running a L2 vCPU (see [1] for terminology) with LPCR_MER bit set and no
pending interrupts results in that L2 vCPU getting an infinite flood of
spurious interrupts. The 'if check' in kvmhv_run_single_vcpu() sets the
LPCR_MER bit if there are pending interrupts.
The spurious flood problem can be observed in 2 cases:
1. Crashing the guest while interrupt heavy workload is running
a. Start a L2 guest and run an interrupt heavy workload (eg: ipistorm)
b. While the workload is running, crash the guest (make sure kdump
is configured)
c. Any one of the vCPUs of the guest will start getting an infinite
flood of spurious interrupts.
2. Running LTP stress tests in multiple guests at the same time
a. Start 4 L2 guests.
b. Start running LTP stress tests on all 4 guests at same time.
c. In some time, any one/more of the vCPUs of any of the guests will
start getting an infinite flood of spurious interrupts.
The root cause of both the above issues is the same:
1. A NMI is sent to a running vCPU that has LPCR_MER bit set.
2. In the NMI path, all registers are refreshed, i.e, H_GUEST_GET_STATE
is called for all the registers.
3. When H_GUEST_GET_STATE is called for LPCR, the vcpu->arch.vcore->lpcr
of that vCPU at L1 level gets updated with LPCR_MER set to 1, and this
new value is always used whenever that vCPU runs, regardless of whether
there was a pending interrupt.
4. Since LPCR_MER is set, the vCPU in L2 always jumps to the external
interrupt handler, and this cycle never ends.
Fix the spurious flood by masking off the LPCR_MER bit before running a
L2 vCPU to ensure that it is not set if there are no pending interrupts.
[1] Terminology:
1. L0 : PAPR hypervisor running in HV mode
2. L1 : Linux guest (logical partition) running on top of L0
3. L2 : KVM guest running on top of L1
Fixes: ec0f6639fa88 ("KVM: PPC: Book3S HV nestedv2: Ensure LPCR_MER bit is passed to the L0")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
---
v1 -> v2:
1. Removed the macro which was silently clearing LPCR_MER bit from vcore->lpcr
and instead just masked it off while sending it to kvmhv_run_single_vcpu().
Added an inline comment describing the reason to avoid anyone tipping
it over. (Suggested by Ritesh in an internal review)
v2 -> v3:
1. Moved the masking of LPCR_MER from kvmppc_vcpu_run_hv() to
kvmhv_run_single_vcpu() (Suggested by Michael Ellerman)
arch/powerpc/kvm/book3s_hv.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 8f7d7e37bc8c..0ed5c5c7a350 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -4892,6 +4892,18 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
BOOK3S_INTERRUPT_EXTERNAL, 0);
else
lpcr |= LPCR_MER;
+ } else {
+ /*
+ * L1's copy of L2's LPCR (vcpu->arch.vcore->lpcr) can get its MER bit
+ * unexpectedly set - for e.g. during NMI handling when all register
+ * states are synchronized from L0 to L1. L1 needs to inform L0 about
+ * MER=1 only when there are pending external interrupts.
+ * In the above if check, MER bit is set if there are pending
+ * external interrupts. Hence, explicity mask off MER bit
+ * here as otherwise it may generate spurious interrupts in L2 KVM
+ * causing an endless loop, which results in L2 guest getting hung.
+ */
+ lpcr &= ~LPCR_MER;
}
} else if (vcpu->arch.pending_exceptions ||
vcpu->arch.doorbell_request ||
--
2.47.0Gautam Menghani <gautam@linux.ibm.com> writes:
> Running a L2 vCPU (see [1] for terminology) with LPCR_MER bit set and no
> pending interrupts results in that L2 vCPU getting an infinite flood of
> spurious interrupts. The 'if check' in kvmhv_run_single_vcpu() sets the
> LPCR_MER bit if there are pending interrupts.
Applied to powerpc/fixes.
[1/1] KVM: PPC: Book3S HV: Mask off LPCR_MER for a vCPU before running it to avoid spurious interrupts
https://git.kernel.org/powerpc/c/a373830f96db288a3eb43a8692b6bcd0bd88dfe1
cheers
Gautam Menghani <gautam@linux.ibm.com> writes:
> Running a L2 vCPU (see [1] for terminology) with LPCR_MER bit set and no
> pending interrupts results in that L2 vCPU getting an infinite flood of
> spurious interrupts. The 'if check' in kvmhv_run_single_vcpu() sets the
> LPCR_MER bit if there are pending interrupts.
>
> The spurious flood problem can be observed in 2 cases:
> 1. Crashing the guest while interrupt heavy workload is running
> a. Start a L2 guest and run an interrupt heavy workload (eg: ipistorm)
> b. While the workload is running, crash the guest (make sure kdump
> is configured)
> c. Any one of the vCPUs of the guest will start getting an infinite
> flood of spurious interrupts.
>
> 2. Running LTP stress tests in multiple guests at the same time
> a. Start 4 L2 guests.
> b. Start running LTP stress tests on all 4 guests at same time.
> c. In some time, any one/more of the vCPUs of any of the guests will
> start getting an infinite flood of spurious interrupts.
>
> The root cause of both the above issues is the same:
> 1. A NMI is sent to a running vCPU that has LPCR_MER bit set.
> 2. In the NMI path, all registers are refreshed, i.e, H_GUEST_GET_STATE
> is called for all the registers.
> 3. When H_GUEST_GET_STATE is called for LPCR, the vcpu->arch.vcore->lpcr
> of that vCPU at L1 level gets updated with LPCR_MER set to 1, and this
> new value is always used whenever that vCPU runs, regardless of whether
> there was a pending interrupt.
> 4. Since LPCR_MER is set, the vCPU in L2 always jumps to the external
> interrupt handler, and this cycle never ends.
>
> Fix the spurious flood by masking off the LPCR_MER bit before running a
> L2 vCPU to ensure that it is not set if there are no pending interrupts.
>
> [1] Terminology:
> 1. L0 : PAPR hypervisor running in HV mode
> 2. L1 : Linux guest (logical partition) running on top of L0
> 3. L2 : KVM guest running on top of L1
>
> Fixes: ec0f6639fa88 ("KVM: PPC: Book3S HV nestedv2: Ensure LPCR_MER bit is passed to the L0")
> Cc: stable@vger.kernel.org # v6.8+
> Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
> ---
> v1 -> v2:
> 1. Removed the macro which was silently clearing LPCR_MER bit from vcore->lpcr
> and instead just masked it off while sending it to kvmhv_run_single_vcpu().
> Added an inline comment describing the reason to avoid anyone tipping
> it over. (Suggested by Ritesh in an internal review)
>
> v2 -> v3:
> 1. Moved the masking of LPCR_MER from kvmppc_vcpu_run_hv() to
> kvmhv_run_single_vcpu() (Suggested by Michael Ellerman)
>
> arch/powerpc/kvm/book3s_hv.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
> index 8f7d7e37bc8c..0ed5c5c7a350 100644
> --- a/arch/powerpc/kvm/book3s_hv.c
> +++ b/arch/powerpc/kvm/book3s_hv.c
> @@ -4892,6 +4892,18 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
> BOOK3S_INTERRUPT_EXTERNAL, 0);
> else
> lpcr |= LPCR_MER;
> + } else {
> + /*
> + * L1's copy of L2's LPCR (vcpu->arch.vcore->lpcr) can get its MER bit
> + * unexpectedly set - for e.g. during NMI handling when all register
> + * states are synchronized from L0 to L1. L1 needs to inform L0 about
> + * MER=1 only when there are pending external interrupts.
> + * In the above if check, MER bit is set if there are pending
> + * external interrupts. Hence, explicity mask off MER bit
> + * here as otherwise it may generate spurious interrupts in L2 KVM
> + * causing an endless loop, which results in L2 guest getting hung.
> + */
> + lpcr &= ~LPCR_MER;
> }
I think we had enough discussions on v1 internally and v2 on mailing
list. So I am comfortable giving...
LGTM. Please feel free to add -
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
> } else if (vcpu->arch.pending_exceptions ||
> vcpu->arch.doorbell_request ||
> --
> 2.47.0
© 2016 - 2024 Red Hat, Inc.