[v5] can: m_can: Add am62 wakeup support

[PATCH v5 7/9] arm64: dts: ti: k3-am62: Mark mcu_mcan0/1 as wakeup-source

Posted by Markus Schneider-Pargmann 3 weeks, 6 days ago

mcu_mcan0 and mcu_mcan1 can be wakeup sources for the SoC. Mark them
accordingly in the devicetree.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index bb43a411f59b281df476afcb1a71b988ca27f002..e22177b9dfecb541e99b0807f8b79e7b878b6514 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -160,6 +160,7 @@ mcu_mcan0: can@4e08000 {
 		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
 		clock-names = "hclk", "cclk";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		wakeup-source;
 		status = "disabled";
 	};
 
@@ -172,6 +173,7 @@ mcu_mcan1: can@4e18000 {
 		clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
 		clock-names = "hclk", "cclk";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		wakeup-source;
 		status = "disabled";
 	};
 };

-- 
2.45.2

Re: [PATCH v5 7/9] arm64: dts: ti: k3-am62: Mark mcu_mcan0/1 as wakeup-source

Posted by Dhruva Gole 3 weeks, 6 days ago

On Oct 28, 2024 at 18:38:13 +0100, Markus Schneider-Pargmann wrote:
> mcu_mcan0 and mcu_mcan1 can be wakeup sources for the SoC. Mark them
> accordingly in the devicetree.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> ---

Reviewed-by: Dhruva Gole <d-gole@ti.com>

-- 
Best regards,
Dhruva Gole
Texas Instruments Incorporated