BCM2712 still uses the firmware clocks and power drivers, so add
them to the base device tree.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 28 ++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index 2bdbb6780242..92a2ada037f3 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -62,3 +62,31 @@ &sdio1 {
sd-uhs-ddr50;
sd-uhs-sdr104;
};
+
+&soc {
+ firmware: firmware {
+ compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mboxes = <&mailbox>;
+ dma-ranges;
+
+ firmware_clocks: clocks {
+ compatible = "raspberrypi,firmware-clocks";
+ #clock-cells = <1>;
+ };
+
+ reset: reset {
+ compatible = "raspberrypi,firmware-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ power: power {
+ compatible = "raspberrypi,bcm2835-power";
+ firmware = <&firmware>;
+ #power-domain-cells = <1>;
+ };
+
+};
--
2.34.1