From: Maxime Ripard <mripard@kernel.org>
The BCM2712 has an evolution of what used to be called TXP in the
earlier SoCs, but is now called MOP.
There's a few differences still, so we can add a new compatible to deal
with them easily.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/gpu/drm/vc4/vc4_txp.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_txp.c b/drivers/gpu/drm/vc4/vc4_txp.c
index 2979d141f3bb..0fb8a57652b5 100644
--- a/drivers/gpu/drm/vc4/vc4_txp.c
+++ b/drivers/gpu/drm/vc4/vc4_txp.c
@@ -386,6 +386,7 @@ static const struct drm_connector_funcs vc4_txp_connector_funcs = {
static void vc4_txp_encoder_disable(struct drm_encoder *encoder)
{
struct drm_device *drm = encoder->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(drm);
struct vc4_txp *txp = encoder_to_vc4_txp(encoder);
int idx;
@@ -404,7 +405,8 @@ static void vc4_txp_encoder_disable(struct drm_encoder *encoder)
WARN_ON(TXP_READ(TXP_DST_CTRL) & TXP_BUSY);
}
- TXP_WRITE(TXP_DST_CTRL, TXP_POWERDOWN);
+ if (vc4->gen < VC4_GEN_6_C)
+ TXP_WRITE(TXP_DST_CTRL, TXP_POWERDOWN);
drm_dev_exit(idx);
}
@@ -508,6 +510,20 @@ static irqreturn_t vc4_txp_interrupt(int irq, void *data)
return IRQ_HANDLED;
}
+static const struct vc4_txp_data bcm2712_mop_data = {
+ .base = {
+ .name = "mop",
+ .debugfs_name = "mop_regs",
+ .hvs_available_channels = BIT(2),
+ .hvs_output = 2,
+ },
+ .encoder_type = VC4_ENCODER_TYPE_TXP0,
+ .high_addr_ptr_reg = TXP_DST_PTR_HIGH_MOP,
+ .has_byte_enable = true,
+ .size_minus_one = true,
+ .supports_40bit_addresses = true,
+};
+
const struct vc4_txp_data bcm2835_txp_data = {
.base = {
.name = "txp",
@@ -613,6 +629,7 @@ static void vc4_txp_remove(struct platform_device *pdev)
}
static const struct of_device_id vc4_txp_dt_match[] = {
+ { .compatible = "brcm,bcm2712-mop", .data = &bcm2712_mop_data },
{ .compatible = "brcm,bcm2835-txp", .data = &bcm2835_txp_data },
{ /* sentinel */ },
};
--
2.34.1