Add support for Quectel RG650V which is based on Qualcomm SDX65 chip.
The composition is DIAG / NMEA / AT / AT / QMI.

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2c7c ProdID=0122 Rev=05.15
S:  Manufacturer=Quectel
S:  Product=RG650V-EU
S:  SerialNumber=xxxxxxx
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=9ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=9ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=9ms
Signed-off-by: Benoît Monin <benoit.monin@gmx.fr>
---
 drivers/usb/serial/option.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 4f18f189f309..aeaad2e1a24a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -251,6 +251,7 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_VENDOR_ID			0x2c7c
 /* These Quectel products use Quectel's vendor ID */
 #define QUECTEL_PRODUCT_EC21			0x0121
+#define QUECTEL_PRODUCT_RG650V			0x0122
 #define QUECTEL_PRODUCT_EM061K_LTA		0x0123
 #define QUECTEL_PRODUCT_EM061K_LMS		0x0124
 #define QUECTEL_PRODUCT_EC25			0x0125
@@ -1273,6 +1274,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG916Q, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG650V, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG650V, 0xff, 0, 0) },

 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },

On Thu, Oct 24, 2024 at 05:09:19PM +0200, Benoît Monin wrote:
> Add support for Quectel RG650V which is based on Qualcomm SDX65 chip.
> The composition is DIAG / NMEA / AT / AT / QMI.
> 
> T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=5000 MxCh= 0
> D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
> P:  Vendor=2c7c ProdID=0122 Rev=05.15
> S:  Manufacturer=Quectel
> S:  Product=RG650V-EU
> S:  SerialNumber=xxxxxxx
> C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
> I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=9ms
> I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=9ms
> I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
> E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=9ms
> Signed-off-by: Benoît Monin <benoit.monin@gmx.fr>

Next time make sure to add an empty line before your SoB.

Applied, thanks.

Johan