Enable SD and emmc on the Qualcomm QCS615 Ride platform.

Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs615-ride.dts | 31 ++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index 4ef969a6af15..7a5d0a3e725c 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -5,6 +5,7 @@
 /dts-v1/;
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "qcs615.dtsi"
 / {
 	model = "Qualcomm Technologies, Inc. QCS615 Ride";
@@ -12,6 +13,8 @@ / {
 	chassis-type = "embedded";
 
 	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
 		serial0 = &uart0;
 	};
 
@@ -213,6 +216,34 @@ &rpmhcc {
 	clocks = <&xo_board_clk>;
 };
 
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&vreg_l17a>;
+	vqmmc-supply = <&vreg_s4a>;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_state_on>;
+	pinctrl-1 = <&sdc2_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l10a>;
+	vqmmc-supply = <&vreg_l2a>;
+
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
-- 
2.34.1