Implement the i3c_master_add_spd_dev() function in the I3C master to
handle SPD (Serial Presence Detect) device creation and map the board
information into the I3C device structure.

Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
 drivers/i3c/master.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 7d23c32e1c0f..ba6f17cb8aa6 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1657,6 +1657,45 @@ i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
 	}
 }
 
+static int i3c_master_add_spd_dev(struct i3c_master_controller *master,
+				  struct i3c_dev_boardinfo *boardinfo)
+{
+	struct i3c_dev_desc *i3cdev;
+	int ret;
+
+	list_for_each_entry(boardinfo, &master->boardinfo.i3c, node) {
+		struct i3c_device_info info = {
+			.static_addr = boardinfo->static_addr,
+		};
+
+		ret = i3c_bus_get_addr_slot_status(&master->bus, boardinfo->static_addr);
+		if (ret != I3C_ADDR_SLOT_FREE)
+			return -EBUSY;
+
+		i3cdev = i3c_master_alloc_i3c_dev(master, &info);
+		if (IS_ERR(i3cdev))
+			return -ENOMEM;
+
+		i3cdev->boardinfo = boardinfo;
+		ret = i3c_master_attach_i3c_dev(master, i3cdev);
+		if (ret)
+			goto err_free_dev;
+
+		i3cdev->info.pid = i3cdev->boardinfo->pid;
+		i3cdev->info.dyn_addr = i3cdev->boardinfo->init_dyn_addr;
+
+		i3c_bus_normaluse_lock(&master->bus);
+		i3c_master_register_new_i3c_devs(master);
+		i3c_bus_normaluse_unlock(&master->bus);
+	}
+
+	return 0;
+
+err_free_dev:
+	i3c_master_free_i3c_dev(i3cdev);
+	return ret;
+}
+
 /**
  * i3c_master_do_daa() - do a DAA (Dynamic Address Assignment)
  * @master: master doing the DAA
@@ -1814,7 +1853,7 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
 {
 	enum i3c_addr_slot_status status;
 	struct i2c_dev_boardinfo *i2cboardinfo;
-	struct i3c_dev_boardinfo *i3cboardinfo;
+	struct i3c_dev_boardinfo *i3cboardinfo = NULL;
 	struct i2c_dev_desc *i2cdev;
 	int ret;
 
@@ -1868,6 +1907,8 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
 		goto err_bus_cleanup;
 	}
 
+	i3c_master_add_spd_dev(master, i3cboardinfo);
+
 	if (master->ops->set_speed) {
 		ret = master->ops->set_speed(master, I3C_OPEN_DRAIN_SLOW_SPEED);
 		if (ret)
-- 
2.34.1