According to the i.MX93 Fusemap the two MAC addresses are stored in
words 315 to 317 like this:

315	MAC1_ADDR_31_0[31:0]
316	MAC1_ADDR_47_32[47:32]
	MAC2_ADDR_15_0[15:0]
317	MAC2_ADDR_47_16[31:0]

This means the MAC addresses are stored in reverse byte order. We have
to swap the bytes before passing them to the upper layers. The storage
format is consistent to the one used on i.MX6 using imx-ocotp driver
which does the same byte swapping as introduced here.

With this patch the MAC address on my i.MX93 TQ board correctly reads as
00:d0:93:6b:27:b8 instead of b8:27:6b:93:d0:00.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/nvmem/imx-ocotp-ele.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/nvmem/imx-ocotp-ele.c b/drivers/nvmem/imx-ocotp-ele.c
index b2d21a5f77bc1..422a6d53b10ef 100644
--- a/drivers/nvmem/imx-ocotp-ele.c
+++ b/drivers/nvmem/imx-ocotp-ele.c
@@ -111,6 +111,26 @@ static int imx_ocotp_reg_read(void *context, unsigned int offset, void *val, siz
 	return 0;
 };
 
+static int imx_ocotp_cell_pp(void *context, const char *id, int index,
+			     unsigned int offset, void *data, size_t bytes)
+{
+	u8 *buf = data;
+	int i;
+
+	/* Deal with some post processing of nvmem cell data */
+	if (id && !strcmp(id, "mac-address"))
+		for (i = 0; i < bytes / 2; i++)
+			swap(buf[i], buf[bytes - i - 1]);
+
+	return 0;
+}
+
+static void imx_ocotp_fixup_dt_cell_info(struct nvmem_device *nvmem,
+					 struct nvmem_cell_info *cell)
+{
+	cell->read_post_process = imx_ocotp_cell_pp;
+}
+
 static int imx_ele_ocotp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -137,6 +157,8 @@ static int imx_ele_ocotp_probe(struct platform_device *pdev)
 	priv->config.stride = 1;
 	priv->config.priv = priv;
 	priv->config.read_only = true;
+	priv->config.add_legacy_fixed_of_cells = true;
+	priv->config.fixup_dt_cell_info = imx_ocotp_fixup_dt_cell_info;
 	mutex_init(&priv->lock);
 
 	nvmem = devm_nvmem_register(dev, &priv->config);

-- 
2.39.5