Add the necessary DT changes to enable HDMI0 on Radxa ROCK 5A.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
Since the initial support for the RK3588 HDMI TX Controller [1] has been
merged as of next-20241018, let's enable the HDMI0 output port for the
following boards: Radxa ROCK 5A & 5B, Rockchip RK3588 EVB1 V10, Xunlong
Orange Pi 5+.

Thanks,
Cristian

[1]: https://lore.kernel.org/all/20241016-b4-rk3588-bridge-upstream-v10-0-87ef92a6d14e@collabora.com/
---
Changes in v3:
- Used the proper (i.e. micro) HDMI connector type for ROCK 5A (Jonas)
- Rebased series onto next-20241022 and dropped patches already merged
  by Heiko
- Link to v2: https://lore.kernel.org/r/20241019-rk3588-hdmi0-dt-v2-0-466cd80e8ff9@collabora.com

Changes in v2:
- Updated descriptions for rock-5a & rock-5b patches to include Radxa,
  per Naoki's review; also collected his Tested-by on the latter
- Included Naoki's HPD pin related fix in rock-5a patch and dropped the
  UNTESTED prefix from the subject
- Link to v1: https://lore.kernel.org/r/20241019-rk3588-hdmi0-dt-v1-0-bd8f299feacd@collabora.com
---
 arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 52 ++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index 5882027ab64c94066ead9a1c6cc84226968a69c8..3ca23555d90c5fedd95d4e8681c073b6523f5bf8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -5,6 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588s.dtsi"
 
 / {
@@ -35,6 +36,17 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -301,6 +313,31 @@ &gmac1_rgmii_clk
 	status = "okay";
 };
 
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmim0_tx0_cec
+		     &hdmim1_tx0_hpd
+		     &hdmim0_tx0_scl
+		     &hdmim0_tx0_sda>;
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
 &mdio1 {
 	rgmii_phy1: ethernet-phy@1 {
 		/* RTL8211F */
@@ -793,3 +830,18 @@ &usb_host1_ohci {
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};

---
base-commit: 7436324ebd147598f940dde1335b7979dbccc339
change-id: 20241018-rk3588-hdmi0-dt-1a135d0076af

On Tue, 22 Oct 2024 19:04:42 +0300, Cristian Ciocaltea wrote:
> Add the necessary DT changes to enable HDMI0 on Radxa ROCK 5A.
> 
> 

Applied, thanks!

[1/1] arm64: dts: rockchip: Enable HDMI0 on rock-5a
      commit: f57a8daf6bbd8e71f16693ad6d8421cb881c7fe0

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>