Provide dt-schema documentation for Exynos8895 SoC clock controller.
Add device tree clock binding definitions for the following CMU blocks:
- CMU_TOP
- CMU_FSYS0/1
- CMU_PERIC0/1
- CMU_PERIS
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
---
.../clock/samsung,exynos8895-clock.yaml | 243 ++++++++
.../dt-bindings/clock/samsung,exynos8895.h | 535 ++++++++++++++++++
2 files changed, 778 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos8895-clock.yaml
create mode 100644 include/dt-bindings/clock/samsung,exynos8895.h
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos8895-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos8895-clock.yaml
new file mode 100644
index 000000000..0f7710b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos8895-clock.yaml
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos8895-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos8895 SoC clock controller
+
+maintainers:
+ - Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ - Chanwoo Choi <cw00.choi@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+ - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+ Exynos8895 clock controller is comprised of several CMU units, generating
+ clocks for different domains. Those CMU units are modeled as separate device
+ tree nodes, and might depend on each other. The root clock in that root tree
+ is an external clock: OSCCLK (26 MHz). This external clock must be defined
+ as a fixed-rate clock in dts.
+
+ CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+ dividers; all other clocks of function blocks (other CMUs) are usually
+ derived from CMU_TOP.
+
+ Each clock is assigned an identifier and client nodes can use this identifier
+ to specify the clock which they consume. All clocks available for usage
+ in clock consumer nodes are defined as preprocessor macros in
+ 'include/dt-bindings/clock/samsung,exynos8895.h' header.
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos8895-cmu-top
+ - samsung,exynos8895-cmu-fsys0
+ - samsung,exynos8895-cmu-fsys1
+ - samsung,exynos8895-cmu-peric0
+ - samsung,exynos8895-cmu-peric1
+ - samsung,exynos8895-cmu-peris
+
+ clocks:
+ minItems: 1
+ maxItems: 16
+
+ clock-names:
+ minItems: 1
+ maxItems: 16
+
+ "#clock-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos8895-cmu-top
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+
+ clock-names:
+ items:
+ - const: oscclk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos8895-cmu-fsys0
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_FSYS0 BUS clock (from CMU_TOP)
+ - description: CMU_FSYS0 DPGTC clock (from CMU_TOP)
+ - description: CMU_FSYS0 MMC_EMBD clock (from CMU_TOP)
+ - description: CMU_FSYS0 UFS_EMBD clock (from CMU_TOP)
+ - description: CMU_FSYS0 USBDRD30 clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: bus
+ - const: dpgtc
+ - const: mmc_embd
+ - const: ufs_embd
+ - const: usbdrd30
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos8895-cmu-fsys1
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_FSYS1 BUS clock (from CMU_TOP)
+ - description: CMU_FSYS1 MMC_CARD clock (from CMU_TOP)
+ - description: CMU_FSYS1 PCIE clock (from CMU_TOP)
+ - description: CMU_FSYS1 UFS_CARD clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: bus
+ - const: mmc_card
+ - const: pcie
+ - const: ufs_card
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos8895-cmu-peric0
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_PERIC0 BUS clock (from CMU_TOP)
+ - description: CMU_PERIC0 UART_DBG clock (from CMU_TOP)
+ - description: CMU_PERIC0 USI00 clock (from CMU_TOP)
+ - description: CMU_PERIC0 USI01 clock (from CMU_TOP)
+ - description: CMU_PERIC0 USI02 clock (from CMU_TOP)
+ - description: CMU_PERIC0 USI03 clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: bus
+ - const: uart_dbg
+ - const: usi00
+ - const: usi01
+ - const: usi02
+ - const: usi03
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos8895-cmu-peric1
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_PERIC1 BUS clock (from CMU_TOP)
+ - description: CMU_PERIC1 SPEEDY2 clock (from CMU_TOP)
+ - description: CMU_PERIC1 SPI_CAM0 clock (from CMU_TOP)
+ - description: CMU_PERIC1 SPI_CAM1 clock (from CMU_TOP)
+ - description: CMU_PERIC1 UART_BT clock (from CMU_TOP)
+ - description: CMU_PERIC1 USI04 clock (from CMU_TOP)
+ - description: CMU_PERIC1 USI05 clock (from CMU_TOP)
+ - description: CMU_PERIC1 USI06 clock (from CMU_TOP)
+ - description: CMU_PERIC1 USI07 clock (from CMU_TOP)
+ - description: CMU_PERIC1 USI08 clock (from CMU_TOP)
+ - description: CMU_PERIC1 USI09 clock (from CMU_TOP)
+ - description: CMU_PERIC1 USI10 clock (from CMU_TOP)
+ - description: CMU_PERIC1 USI11 clock (from CMU_TOP)
+ - description: CMU_PERIC1 USI12 clock (from CMU_TOP)
+ - description: CMU_PERIC1 USI13 clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: bus
+ - const: speedy2
+ - const: cam0
+ - const: cam1
+ - const: uart_bt
+ - const: usi04
+ - const: usi05
+ - const: usi06
+ - const: usi07
+ - const: usi08
+ - const: usi09
+ - const: usi10
+ - const: usi11
+ - const: usi12
+ - const: usi13
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos8895-cmu-peris
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_PERIS BUS clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: bus
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clocks
+ - clock-names
+ - reg
+
+additionalProperties: false
+
+examples:
+ # Clock controller node for CMU_FSYS1
+ - |
+ #include <dt-bindings/clock/samsung,exynos8895.h>
+
+ cmu_fsys1: clock-controller@11400000 {
+ compatible = "samsung,exynos8895-cmu-fsys1";
+ reg = <0x11400000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>,
+ <&cmu_top CLK_DOUT_CMU_FSYS1_BUS>,
+ <&cmu_top CLK_DOUT_CMU_FSYS1_MMC_CARD>,
+ <&cmu_top CLK_DOUT_CMU_FSYS1_PCIE>,
+ <&cmu_top CLK_DOUT_CMU_FSYS1_UFS_CARD>;
+ clock-names = "oscclk", "bus", "mmc_card",
+ "pcie", "ufs_card";
+ };
+
+...
diff --git a/include/dt-bindings/clock/samsung,exynos8895.h b/include/dt-bindings/clock/samsung,exynos8895.h
new file mode 100644
index 000000000..add55b3bf
--- /dev/null
+++ b/include/dt-bindings/clock/samsung,exynos8895.h
@@ -0,0 +1,535 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2024 Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Author: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ *
+ * Device Tree binding constants for Exynos8895 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS8895_H
+#define _DT_BINDINGS_CLOCK_EXYNOS8895_H
+
+/* CMU_TOP */
+#define CLK_FOUT_SHARED0_PLL 1
+#define CLK_FOUT_SHARED1_PLL 2
+#define CLK_FOUT_SHARED2_PLL 3
+#define CLK_FOUT_SHARED3_PLL 4
+#define CLK_FOUT_SHARED4_PLL 5
+#define CLK_MOUT_PLL_SHARED0 6
+#define CLK_MOUT_PLL_SHARED1 7
+#define CLK_MOUT_PLL_SHARED2 8
+#define CLK_MOUT_PLL_SHARED3 9
+#define CLK_MOUT_PLL_SHARED4 10
+#define CLK_MOUT_CP2AP_MIF_CLK_USER 11
+#define CLK_MOUT_CMU_ABOX_CPUABOX 12
+#define CLK_MOUT_CMU_APM_BUS 13
+#define CLK_MOUT_CMU_BUS1_BUS 14
+#define CLK_MOUT_CMU_BUSC_BUS 15
+#define CLK_MOUT_CMU_BUSC_BUSPHSI2C 16
+#define CLK_MOUT_CMU_CAM_BUS 17
+#define CLK_MOUT_CMU_CAM_TPU0 18
+#define CLK_MOUT_CMU_CAM_TPU1 19
+#define CLK_MOUT_CMU_CAM_VRA 20
+#define CLK_MOUT_CMU_CIS_CLK0 21
+#define CLK_MOUT_CMU_CIS_CLK1 22
+#define CLK_MOUT_CMU_CIS_CLK2 23
+#define CLK_MOUT_CMU_CIS_CLK3 24
+#define CLK_MOUT_CMU_CORE_BUS 25
+#define CLK_MOUT_CMU_CPUCL0_SWITCH 26
+#define CLK_MOUT_CMU_CPUCL1_SWITCH 27
+#define CLK_MOUT_CMU_DBG_BUS 28
+#define CLK_MOUT_CMU_DCAM_BUS 29
+#define CLK_MOUT_CMU_DCAM_IMGD 30
+#define CLK_MOUT_CMU_DPU_BUS 31
+#define CLK_MOUT_CMU_DROOPDETECTOR 32
+#define CLK_MOUT_CMU_DSP_BUS 33
+#define CLK_MOUT_CMU_FSYS0_BUS 34
+#define CLK_MOUT_CMU_FSYS0_DPGTC 35
+#define CLK_MOUT_CMU_FSYS0_MMC_EMBD 36
+#define CLK_MOUT_CMU_FSYS0_UFS_EMBD 37
+#define CLK_MOUT_CMU_FSYS0_USBDRD30 38
+#define CLK_MOUT_CMU_FSYS1_BUS 39
+#define CLK_MOUT_CMU_FSYS1_MMC_CARD 40
+#define CLK_MOUT_CMU_FSYS1_PCIE 41
+#define CLK_MOUT_CMU_FSYS1_UFS_CARD 42
+#define CLK_MOUT_CMU_G2D_G2D 43
+#define CLK_MOUT_CMU_G2D_JPEG 44
+#define CLK_MOUT_CMU_HPM 45
+#define CLK_MOUT_CMU_IMEM_BUS 46
+#define CLK_MOUT_CMU_ISPHQ_BUS 47
+#define CLK_MOUT_CMU_ISPLP_BUS 48
+#define CLK_MOUT_CMU_IVA_BUS 49
+#define CLK_MOUT_CMU_MFC_BUS 50
+#define CLK_MOUT_CMU_MIF_SWITCH 51
+#define CLK_MOUT_CMU_PERIC0_BUS 52
+#define CLK_MOUT_CMU_PERIC0_UART_DBG 53
+#define CLK_MOUT_CMU_PERIC0_USI00 54
+#define CLK_MOUT_CMU_PERIC0_USI01 55
+#define CLK_MOUT_CMU_PERIC0_USI02 56
+#define CLK_MOUT_CMU_PERIC0_USI03 57
+#define CLK_MOUT_CMU_PERIC1_BUS 58
+#define CLK_MOUT_CMU_PERIC1_SPEEDY2 59
+#define CLK_MOUT_CMU_PERIC1_SPI_CAM0 60
+#define CLK_MOUT_CMU_PERIC1_SPI_CAM1 61
+#define CLK_MOUT_CMU_PERIC1_UART_BT 62
+#define CLK_MOUT_CMU_PERIC1_USI04 63
+#define CLK_MOUT_CMU_PERIC1_USI05 64
+#define CLK_MOUT_CMU_PERIC1_USI06 65
+#define CLK_MOUT_CMU_PERIC1_USI07 66
+#define CLK_MOUT_CMU_PERIC1_USI08 67
+#define CLK_MOUT_CMU_PERIC1_USI09 68
+#define CLK_MOUT_CMU_PERIC1_USI10 69
+#define CLK_MOUT_CMU_PERIC1_USI11 70
+#define CLK_MOUT_CMU_PERIC1_USI12 71
+#define CLK_MOUT_CMU_PERIC1_USI13 72
+#define CLK_MOUT_CMU_PERIS_BUS 73
+#define CLK_MOUT_CMU_SRDZ_BUS 74
+#define CLK_MOUT_CMU_SRDZ_IMGD 75
+#define CLK_MOUT_CMU_VPU_BUS 76
+#define CLK_DOUT_CMU_ABOX_CPUABOX 77
+#define CLK_DOUT_CMU_APM_BUS 78
+#define CLK_DOUT_CMU_BUS1_BUS 79
+#define CLK_DOUT_CMU_BUSC_BUS 80
+#define CLK_DOUT_CMU_BUSC_BUSPHSI2C 81
+#define CLK_DOUT_CMU_CAM_BUS 82
+#define CLK_DOUT_CMU_CAM_TPU0 83
+#define CLK_DOUT_CMU_CAM_TPU1 84
+#define CLK_DOUT_CMU_CAM_VRA 85
+#define CLK_DOUT_CMU_CIS_CLK0 86
+#define CLK_DOUT_CMU_CIS_CLK1 87
+#define CLK_DOUT_CMU_CIS_CLK2 88
+#define CLK_DOUT_CMU_CIS_CLK3 89
+#define CLK_DOUT_CMU_CORE_BUS 90
+#define CLK_DOUT_CMU_CPUCL0_SWITCH 91
+#define CLK_DOUT_CMU_CPUCL1_SWITCH 92
+#define CLK_DOUT_CMU_DBG_BUS 93
+#define CLK_DOUT_CMU_DCAM_BUS 94
+#define CLK_DOUT_CMU_DCAM_IMGD 95
+#define CLK_DOUT_CMU_DPU_BUS 96
+#define CLK_DOUT_CMU_DSP_BUS 97
+#define CLK_DOUT_CMU_FSYS0_BUS 98
+#define CLK_DOUT_CMU_FSYS0_DPGTC 99
+#define CLK_DOUT_CMU_FSYS0_MMC_EMBD 100
+#define CLK_DOUT_CMU_FSYS0_UFS_EMBD 101
+#define CLK_DOUT_CMU_FSYS0_USBDRD30 102
+#define CLK_DOUT_CMU_FSYS1_BUS 103
+#define CLK_DOUT_CMU_FSYS1_MMC_CARD 104
+#define CLK_DOUT_CMU_FSYS1_UFS_CARD 105
+#define CLK_DOUT_CMU_G2D_G2D 106
+#define CLK_DOUT_CMU_G2D_JPEG 107
+#define CLK_DOUT_CMU_G3D_SWITCH 108
+#define CLK_DOUT_CMU_HPM 109
+#define CLK_DOUT_CMU_IMEM_BUS 110
+#define CLK_DOUT_CMU_ISPHQ_BUS 111
+#define CLK_DOUT_CMU_ISPLP_BUS 112
+#define CLK_DOUT_CMU_IVA_BUS 113
+#define CLK_DOUT_CMU_MFC_BUS 114
+#define CLK_DOUT_CMU_MODEM_SHARED0 115
+#define CLK_DOUT_CMU_MODEM_SHARED1 116
+#define CLK_DOUT_CMU_PERIC0_BUS 117
+#define CLK_DOUT_CMU_PERIC0_UART_DBG 118
+#define CLK_DOUT_CMU_PERIC0_USI00 119
+#define CLK_DOUT_CMU_PERIC0_USI01 120
+#define CLK_DOUT_CMU_PERIC0_USI02 121
+#define CLK_DOUT_CMU_PERIC0_USI03 122
+#define CLK_DOUT_CMU_PERIC1_BUS 123
+#define CLK_DOUT_CMU_PERIC1_SPEEDY2 124
+#define CLK_DOUT_CMU_PERIC1_SPI_CAM0 125
+#define CLK_DOUT_CMU_PERIC1_SPI_CAM1 126
+#define CLK_DOUT_CMU_PERIC1_UART_BT 127
+#define CLK_DOUT_CMU_PERIC1_USI04 128
+#define CLK_DOUT_CMU_PERIC1_USI05 129
+#define CLK_DOUT_CMU_PERIC1_USI06 130
+#define CLK_DOUT_CMU_PERIC1_USI07 131
+#define CLK_DOUT_CMU_PERIC1_USI08 132
+#define CLK_DOUT_CMU_PERIC1_USI09 133
+#define CLK_DOUT_CMU_PERIC1_USI10 134
+#define CLK_DOUT_CMU_PERIC1_USI11 135
+#define CLK_DOUT_CMU_PERIC1_USI12 136
+#define CLK_DOUT_CMU_PERIC1_USI13 137
+#define CLK_DOUT_CMU_PERIS_BUS 138
+#define CLK_DOUT_CMU_SRDZ_BUS 139
+#define CLK_DOUT_CMU_SRDZ_IMGD 140
+#define CLK_DOUT_CMU_VPU_BUS 141
+#define CLK_DOUT_CMU_SHARED0_DIV2 142
+#define CLK_DOUT_CMU_SHARED0_DIV4 143
+#define CLK_DOUT_CMU_SHARED1_DIV2 144
+#define CLK_DOUT_CMU_SHARED1_DIV4 145
+#define CLK_DOUT_CMU_SHARED2_DIV2 146
+#define CLK_DOUT_CMU_SHARED3_DIV2 147
+#define CLK_DOUT_CMU_SHARED4_DIV2 148
+#define CLK_DOUT_CMU_FSYS1_PCIE 149
+#define CLK_DOUT_CMU_CP2AP_MIF_CLK_DIV2 150
+#define CLK_DOUT_CMU_CMU_OTP 151
+#define CLK_GOUT_CMU_DROOPDETECTOR 152
+#define CLK_GOUT_CMU_MIF_SWITCH 153
+#define CLK_GOUT_CMU_ABOX_CPUABOX 154
+#define CLK_GOUT_CMU_APM_BUS 155
+#define CLK_GOUT_CMU_BUS1_BUS 156
+#define CLK_GOUT_CMU_BUSC_BUS 157
+#define CLK_GOUT_CMU_BUSC_BUSPHSI2C 158
+#define CLK_GOUT_CMU_CAM_BUS 159
+#define CLK_GOUT_CMU_CAM_TPU0 160
+#define CLK_GOUT_CMU_CAM_TPU1 161
+#define CLK_GOUT_CMU_CAM_VRA 162
+#define CLK_GOUT_CMU_CIS_CLK0 163
+#define CLK_GOUT_CMU_CIS_CLK1 164
+#define CLK_GOUT_CMU_CIS_CLK2 165
+#define CLK_GOUT_CMU_CIS_CLK3 166
+#define CLK_GOUT_CMU_CORE_BUS 167
+#define CLK_GOUT_CMU_CPUCL0_SWITCH 168
+#define CLK_GOUT_CMU_CPUCL1_SWITCH 169
+#define CLK_GOUT_CMU_DBG_BUS 170
+#define CLK_GOUT_CMU_DCAM_BUS 171
+#define CLK_GOUT_CMU_DCAM_IMGD 172
+#define CLK_GOUT_CMU_DPU_BUS 173
+#define CLK_GOUT_CMU_DSP_BUS 174
+#define CLK_GOUT_CMU_FSYS0_BUS 175
+#define CLK_GOUT_CMU_FSYS0_DPGTC 176
+#define CLK_GOUT_CMU_FSYS0_MMC_EMBD 177
+#define CLK_GOUT_CMU_FSYS0_UFS_EMBD 178
+#define CLK_GOUT_CMU_FSYS0_USBDRD30 179
+#define CLK_GOUT_CMU_FSYS1_BUS 180
+#define CLK_GOUT_CMU_FSYS1_MMC_CARD 181
+#define CLK_GOUT_CMU_FSYS1_PCIE 182
+#define CLK_GOUT_CMU_FSYS1_UFS_CARD 183
+#define CLK_GOUT_CMU_G2D_G2D 184
+#define CLK_GOUT_CMU_G2D_JPEG 185
+#define CLK_GOUT_CMU_G3D_SWITCH 186
+#define CLK_GOUT_CMU_HPM 187
+#define CLK_GOUT_CMU_IMEM_BUS 188
+#define CLK_GOUT_CMU_ISPHQ_BUS 189
+#define CLK_GOUT_CMU_ISPLP_BUS 190
+#define CLK_GOUT_CMU_IVA_BUS 191
+#define CLK_GOUT_CMU_MFC_BUS 192
+#define CLK_GOUT_CMU_MODEM_SHARED0 193
+#define CLK_GOUT_CMU_MODEM_SHARED1 194
+#define CLK_GOUT_CMU_PERIC0_BUS 195
+#define CLK_GOUT_CMU_PERIC0_UART_DBG 196
+#define CLK_GOUT_CMU_PERIC0_USI00 197
+#define CLK_GOUT_CMU_PERIC0_USI01 198
+#define CLK_GOUT_CMU_PERIC0_USI02 199
+#define CLK_GOUT_CMU_PERIC0_USI03 200
+#define CLK_GOUT_CMU_PERIC1_BUS 201
+#define CLK_GOUT_CMU_PERIC1_SPEEDY2 202
+#define CLK_GOUT_CMU_PERIC1_SPI_CAM0 203
+#define CLK_GOUT_CMU_PERIC1_SPI_CAM1 204
+#define CLK_GOUT_CMU_PERIC1_UART_BT 205
+#define CLK_GOUT_CMU_PERIC1_USI04 206
+#define CLK_GOUT_CMU_PERIC1_USI05 207
+#define CLK_GOUT_CMU_PERIC1_USI06 208
+#define CLK_GOUT_CMU_PERIC1_USI07 209
+#define CLK_GOUT_CMU_PERIC1_USI08 210
+#define CLK_GOUT_CMU_PERIC1_USI09 211
+#define CLK_GOUT_CMU_PERIC1_USI10 212
+#define CLK_GOUT_CMU_PERIC1_USI11 213
+#define CLK_GOUT_CMU_PERIC1_USI12 214
+#define CLK_GOUT_CMU_PERIC1_USI13 215
+#define CLK_GOUT_CMU_PERIS_BUS 216
+#define CLK_GOUT_CMU_SRDZ_BUS 217
+#define CLK_GOUT_CMU_SRDZ_IMGD 218
+#define CLK_GOUT_CMU_VPU_BUS 219
+
+/* CMU_PERIS */
+#define CLK_MOUT_PERIS_BUS_USER 1
+#define CLK_MOUT_PERIS_GIC 2
+#define CLK_GOUT_PERIS_CMU_PERIS_PCLK 3
+#define CLK_GOUT_PERIS_AD_AXI_P_PERIS_ACLKM 4
+#define CLK_GOUT_PERIS_AD_AXI_P_PERIS_ACLKS 5
+#define CLK_GOUT_PERIS_AXI2APB_PERISP0_ACLK 6
+#define CLK_GOUT_PERIS_AXI2APB_PERISP1_ACLK 7
+#define CLK_GOUT_PERIS_BUSIF_TMU_PCLK 8
+#define CLK_GOUT_PERIS_GIC_CLK 9
+#define CLK_GOUT_PERIS_LHM_AXI_P_PERIS_I_CLK 10
+#define CLK_GOUT_PERIS_MCT_PCLK 11
+#define CLK_GOUT_PERIS_OTP_CON_BIRA_PCLK 12
+#define CLK_GOUT_PERIS_OTP_CON_TOP_PCLK 13
+#define CLK_GOUT_PERIS_PMU_PERIS_PCLK 14
+#define CLK_GOUT_PERIS_RSTNSYNC_CLK_PERIS_BUSP_CLK 15
+#define CLK_GOUT_PERIS_RSTNSYNC_CLK_PERIS_GIC_CLK 16
+#define CLK_GOUT_PERIS_SYSREG_PERIS_PCLK 17
+#define CLK_GOUT_PERIS_TZPC00_PCLK 18
+#define CLK_GOUT_PERIS_TZPC01_PCLK 19
+#define CLK_GOUT_PERIS_TZPC02_PCLK 20
+#define CLK_GOUT_PERIS_TZPC03_PCLK 21
+#define CLK_GOUT_PERIS_TZPC04_PCLK 22
+#define CLK_GOUT_PERIS_TZPC05_PCLK 23
+#define CLK_GOUT_PERIS_TZPC06_PCLK 24
+#define CLK_GOUT_PERIS_TZPC07_PCLK 25
+#define CLK_GOUT_PERIS_TZPC08_PCLK 26
+#define CLK_GOUT_PERIS_TZPC09_PCLK 27
+#define CLK_GOUT_PERIS_TZPC10_PCLK 28
+#define CLK_GOUT_PERIS_TZPC11_PCLK 29
+#define CLK_GOUT_PERIS_TZPC12_PCLK 30
+#define CLK_GOUT_PERIS_TZPC13_PCLK 31
+#define CLK_GOUT_PERIS_TZPC14_PCLK 32
+#define CLK_GOUT_PERIS_TZPC15_PCLK 33
+#define CLK_GOUT_PERIS_WDT_CLUSTER0_PCLK 34
+#define CLK_GOUT_PERIS_WDT_CLUSTER1_PCLK 35
+#define CLK_GOUT_PERIS_XIU_P_PERIS_ACLK 36
+
+/* CMU_CORE */
+#define CLK_MOUT_CORE_BUS_USER 1
+#define CLK_DOUT_CORE_BUSP 2
+#define CLK_GOUT_CORE_CORE_CMU_CORE_PCLK 3
+#define CLK_GOUT_CORE_HPM_CORE_HPM_TARGETCLK_C 4
+#define CLK_GOUT_CORE_ADM_APB_G_BDU_PCLKM 5
+#define CLK_GOUT_CORE_APBBR_CCI_PCLK 6
+#define CLK_GOUT_CORE_AXI2APB_CORE_ACLK 7
+#define CLK_GOUT_CORE_AXI2APB_CORE_TP_ACLK 8
+#define CLK_GOUT_CORE_BDU_I_CLK 9
+#define CLK_GOUT_CORE_BDU_I_PCLK 10
+#define CLK_GOUT_CORE_BUSIF_HPMCORE_PCLK 11
+#define CLK_GOUT_CORE_CCI_CLK 12
+#define CLK_GOUT_CORE_CCI_PCLK 13
+#define CLK_GOUT_CORE_LHM_ACE_D0_G3D_I_CLK 14
+#define CLK_GOUT_CORE_LHM_ACE_D1_G3D_I_CLK 15
+#define CLK_GOUT_CORE_LHM_ACE_D2_G3D_I_CLK 16
+#define CLK_GOUT_CORE_LHM_ACE_D3_G3D_I_CLK 17
+#define CLK_GOUT_CORE_LHM_ACE_D_CPUCL1_I_CLK 18
+#define CLK_GOUT_CORE_LHM_AXI_D_CP_I_CLK 19
+#define CLK_GOUT_CORE_LHM_AXI_P_CP_I_CLK 20
+#define CLK_GOUT_CORE_LHM_CPACE_D_CPUCL0_I_CLK 21
+#define CLK_GOUT_CORE_LHM_DBG_G0_DMC_I_CLK 22
+#define CLK_GOUT_CORE_LHM_DBG_G1_DMC_I_CLK 23
+#define CLK_GOUT_CORE_LHM_DBG_G2_DMC_I_CLK 24
+#define CLK_GOUT_CORE_LHM_DBG_G3_DMC_I_CLK 25
+#define CLK_GOUT_CORE_LHS_ATB_T_BDU_I_CLK 26
+#define CLK_GOUT_CORE_LHS_AXI_P_CPUCL0_I_CLK 27
+#define CLK_GOUT_CORE_LHS_AXI_P_CPUCL1_I_CLK 28
+#define CLK_GOUT_CORE_LHS_AXI_P_DBG_I_CLK 29
+#define CLK_GOUT_CORE_LHS_AXI_P_G3D_I_CLK 30
+#define CLK_GOUT_CORE_LHS_AXI_P_IMEM_I_CLK 31
+#define CLK_GOUT_CORE_LHS_PSCDC_D_MIF0_I_CLK 32
+#define CLK_GOUT_CORE_LHS_PSCDC_D_MIF1_I_CLK 33
+#define CLK_GOUT_CORE_LHS_PSCDC_D_MIF2_I_CLK 34
+#define CLK_GOUT_CORE_LHS_PSCDC_D_MIF3_I_CLK 35
+#define CLK_GOUT_CORE_MPACE2AXI_0_CLK 36
+#define CLK_GOUT_CORE_MPACE2AXI_1_CLK 37
+#define CLK_GOUT_CORE_PMU_CORE_PCLK 38
+#define CLK_GOUT_CORE_PPCFW_G3D_ACLK 39
+#define CLK_GOUT_CORE_PPCFW_G3D_PCLK 40
+#define CLK_GOUT_CORE_BCMPPC_CCI_ACLK 41
+#define CLK_GOUT_CORE_BCMPPC_CCI_PCLK 42
+#define CLK_GOUT_CORE_BCM_CPUCL0_ACLK 43
+#define CLK_GOUT_CORE_BCM_CPUCL0_PCLK 44
+#define CLK_GOUT_CORE_BCM_CPUCL1_ACLK 45
+#define CLK_GOUT_CORE_BCM_CPUCL1_PCLK 46
+#define CLK_GOUT_CORE_BCM_G3D0_ACLK 47
+#define CLK_GOUT_CORE_BCM_G3D0_PCLK 48
+#define CLK_GOUT_CORE_BCM_G3D1_ACLK 49
+#define CLK_GOUT_CORE_BCM_G3D1_PCLK 50
+#define CLK_GOUT_CORE_BCM_G3D2_ACLK 51
+#define CLK_GOUT_CORE_BCM_G3D2_PCLK 52
+#define CLK_GOUT_CORE_BCM_G3D3_ACLK 53
+#define CLK_GOUT_CORE_BCM_G3D3_PCLK 54
+#define CLK_GOUT_CORE_RSTNSYNC_CLK_CORE_BUSD_CLK 55
+#define CLK_GOUT_CORE_RSTNSYNC_CLK_CORE_BUSP_CLK 56
+#define CLK_GOUT_CORE_SYSREG_CORE_PCLK 57
+#define CLK_GOUT_CORE_TREX_D_CORE_ACLK 58
+#define CLK_GOUT_CORE_TREX_D_CORE_PCLK 59
+#define CLK_GOUT_CORE_TREX_P0_CORE_ACLK_CORE 60
+#define CLK_GOUT_CORE_TREX_P0_CORE_PCLK 61
+#define CLK_GOUT_CORE_TREX_P0_CORE_PCLK_CORE 62
+#define CLK_GOUT_CORE_TREX_P1_CORE_PCLK 63
+#define CLK_GOUT_CORE_TREX_P1_CORE_PCLK_CORE 64
+
+/* CMU_FSYS0 */
+#define CLK_MOUT_FSYS0_BUS_USER 1
+#define CLK_MOUT_FSYS0_DPGTC_USER 2
+#define CLK_MOUT_FSYS0_MMC_EMBD_USER 3
+#define CLK_MOUT_FSYS0_UFS_EMBD_USER 4
+#define CLK_MOUT_FSYS0_USBDRD30_USER 5
+#define CLK_GOUT_FSYS0_FSYS0_CMU_FSYS0_PCLK 6
+#define CLK_GOUT_FSYS0_AHBBR_FSYS0_HCLK 7
+#define CLK_GOUT_FSYS0_AXI2AHB_FSYS0_ACLK 8
+#define CLK_GOUT_FSYS0_AXI2AHB_USB_FSYS0_ACLK 9
+#define CLK_GOUT_FSYS0_AXI2APB_FSYS0_ACLK 10
+#define CLK_GOUT_FSYS0_BTM_FSYS0_I_ACLK 11
+#define CLK_GOUT_FSYS0_BTM_FSYS0_I_PCLK 12
+#define CLK_GOUT_FSYS0_DP_LINK_I_GTC_EXT_CLK 13
+#define CLK_GOUT_FSYS0_DP_LINK_I_PCLK 14
+#define CLK_GOUT_FSYS0_ETR_MIU_I_ACLK 15
+#define CLK_GOUT_FSYS0_ETR_MIU_I_PCLK 16
+#define CLK_GOUT_FSYS0_GPIO_FSYS0_PCLK 17
+#define CLK_GOUT_FSYS0_LHM_AXI_D_USBTV_I_CLK 18
+#define CLK_GOUT_FSYS0_LHM_AXI_G_ETR_I_CLK 19
+#define CLK_GOUT_FSYS0_LHM_AXI_P_FSYS0_I_CLK 20
+#define CLK_GOUT_FSYS0_LHS_ACEL_D_FSYS0_I_CLK 21
+#define CLK_GOUT_FSYS0_MMC_EMBD_I_ACLK 22
+#define CLK_GOUT_FSYS0_MMC_EMBD_SDCLKIN 23
+#define CLK_GOUT_FSYS0_PMU_FSYS0_PCLK 24
+#define CLK_GOUT_FSYS0_BCM_FSYS0_ACLK 25
+#define CLK_GOUT_FSYS0_BCM_FSYS0_PCLK 26
+#define CLK_GOUT_FSYS0_RSTNSYNC_CLK_FSYS0_BUS_CLK 27
+#define CLK_GOUT_FSYS0_SYSREG_FSYS0_PCLK 28
+#define CLK_GOUT_FSYS0_UFS_EMBD_I_ACLK 29
+#define CLK_GOUT_FSYS0_UFS_EMBD_I_CLK_UNIPRO 30
+#define CLK_GOUT_FSYS0_UFS_EMBD_I_FMP_CLK 31
+#define CLK_GOUT_FSYS0_USBTV_I_USB30DRD_ACLK 32
+#define CLK_GOUT_FSYS0_USBTV_I_USB30DRD_REF_CLK 33
+#define CLK_GOUT_FSYS0_USBTV_I_USB30DRD_SUSPEND_CLK 34
+#define CLK_GOUT_FSYS0_USBTV_I_USBTVH_AHB_CLK 35
+#define CLK_GOUT_FSYS0_USBTV_I_USBTVH_CORE_CLK 36
+#define CLK_GOUT_FSYS0_USBTV_I_USBTVH_XIU_CLK 37
+#define CLK_GOUT_FSYS0_US_D_FSYS0_USB_ACLK 38
+#define CLK_GOUT_FSYS0_XIU_D_FSYS0_ACLK 39
+#define CLK_GOUT_FSYS0_XIU_D_FSYS0_USB_ACLK 40
+#define CLK_GOUT_FSYS0_XIU_P_FSYS0_ACLK 41
+
+/* CMU_FSYS1 */
+#define CLK_MOUT_FSYS1_BUS_USER 1
+#define CLK_MOUT_FSYS1_MMC_CARD_USER 2
+#define CLK_MOUT_FSYS1_PCIE_USER 3
+#define CLK_MOUT_FSYS1_UFS_CARD_USER 4
+#define CLK_GOUT_FSYS1_PCIE_PHY_REF_CLK_IN 5
+#define CLK_GOUT_FSYS1_ADM_AHB_SSS_HCLKM 6
+#define CLK_GOUT_FSYS1_AHBBR_FSYS1_HCLK 7
+#define CLK_GOUT_FSYS1_AXI2AHB_FSYS1_ACLK 8
+#define CLK_GOUT_FSYS1_AXI2APB_FSYS1P0_ACLK 9
+#define CLK_GOUT_FSYS1_AXI2APB_FSYS1P1_ACLK 10
+#define CLK_GOUT_FSYS1_BTM_FSYS1_I_ACLK 11
+#define CLK_GOUT_FSYS1_BTM_FSYS1_I_PCLK 12
+#define CLK_GOUT_FSYS1_FSYS1_CMU_FSYS1_PCLK 13
+#define CLK_GOUT_FSYS1_GPIO_FSYS1_PCLK 14
+#define CLK_GOUT_FSYS1_LHM_AXI_P_FSYS1_I_CLK 15
+#define CLK_GOUT_FSYS1_LHS_ACEL_D_FSYS1_I_CLK 16
+#define CLK_GOUT_FSYS1_MMC_CARD_I_ACLK 17
+#define CLK_GOUT_FSYS1_MMC_CARD_SDCLKIN 18
+#define CLK_GOUT_FSYS1_PCIE_DBI_ACLK_0 19
+#define CLK_GOUT_FSYS1_PCIE_DBI_ACLK_1 20
+#define CLK_GOUT_FSYS1_PCIE_IEEE1500_WRAPPER_FOR_PCIE_PHY_LC_X2_INST_0_I_SCL_APB_PCLK 21
+#define CLK_GOUT_FSYS1_PCIE_MSTR_ACLK_0 22
+#define CLK_GOUT_FSYS1_PCIE_MSTR_ACLK_1 23
+#define CLK_GOUT_FSYS1_PCIE_PCIE_SUB_CTRL_INST_0_I_DRIVER_APB_CLK 24
+#define CLK_GOUT_FSYS1_PCIE_PCIE_SUB_CTRL_INST_1_I_DRIVER_APB_CLK 25
+#define CLK_GOUT_FSYS1_PCIE_PIPE2_DIGITAL_X2_WRAP_INST_0_I_APB_PCLK_SCL 26
+#define CLK_GOUT_FSYS1_PCIE_SLV_ACLK_0 27
+#define CLK_GOUT_FSYS1_PCIE_SLV_ACLK_1 28
+#define CLK_GOUT_FSYS1_PMU_FSYS1_PCLK 29
+#define CLK_GOUT_FSYS1_BCM_FSYS1_ACLK 30
+#define CLK_GOUT_FSYS1_BCM_FSYS1_PCLK 31
+#define CLK_GOUT_FSYS1_RSTNSYNC_CLK_FSYS1_BUS_CLK 32
+#define CLK_GOUT_FSYS1_RTIC_I_ACLK 33
+#define CLK_GOUT_FSYS1_RTIC_I_PCLK 34
+#define CLK_GOUT_FSYS1_SSS_I_ACLK 35
+#define CLK_GOUT_FSYS1_SSS_I_PCLK 36
+#define CLK_GOUT_FSYS1_SYSREG_FSYS1_PCLK 37
+#define CLK_GOUT_FSYS1_TOE_WIFI0_I_CLK 38
+#define CLK_GOUT_FSYS1_TOE_WIFI1_I_CLK 39
+#define CLK_GOUT_FSYS1_UFS_CARD_I_ACLK 40
+#define CLK_GOUT_FSYS1_UFS_CARD_I_CLK_UNIPRO 41
+#define CLK_GOUT_FSYS1_UFS_CARD_I_FMP_CLK 42
+#define CLK_GOUT_FSYS1_XIU_D_FSYS1_ACLK 43
+#define CLK_GOUT_FSYS1_XIU_P_FSYS1_ACLK 44
+
+/* CMU_G3D */
+#define CLK_FOUT_G3D_PLL 1
+#define CLK_MOUT_G3D_PLL 2
+#define CLK_MOUT_G3D_SWITCH_USER 3
+#define CLK_MOUT_G3D_BUSD 4
+#define CLK_DOUT_G3D_BUSP 5
+#define CLK_GOUT_G3D_AGPU 6
+#define CLK_GOUT_G3D_AXI2APB_G3D_ACLK 7
+#define CLK_GOUT_G3D_BUSIF_HPMG3D_PCLK 8
+#define CLK_GOUT_G3D_LHM_AXI_P_G3D_I_CLK 9
+#define CLK_GOUT_G3D_LHS_AXI_G3DSFR_I_CLK 10
+#define CLK_GOUT_G3D_PMU_G3D_PCLK 11
+#define CLK_GOUT_G3D_RSTNSYNC_CLK_G3D_BUSP_CLK 12
+#define CLK_GOUT_G3D_SYSREG_G3D_PCLK 13
+#define CLK_GOUT_G3D_XIU_P_G3D_ACLK 14
+
+/* CMU_PERIC0 */
+#define CLK_MOUT_PERIC0_BUS_USER 1
+#define CLK_MOUT_PERIC0_UART_DBG_USER 2
+#define CLK_MOUT_PERIC0_USI00_USER 3
+#define CLK_MOUT_PERIC0_USI01_USER 4
+#define CLK_MOUT_PERIC0_USI02_USER 5
+#define CLK_MOUT_PERIC0_USI03_USER 6
+#define CLK_GOUT_PERIC0_PERIC0_CMU_PERIC0_PCLK 7
+#define CLK_GOUT_PERIC0_AXI2APB_PERIC0_ACLK 8
+#define CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK 9
+#define CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK 10
+#define CLK_GOUT_PERIC0_PMU_PERIC0_PCLK 11
+#define CLK_GOUT_PERIC0_PWM_I_PCLK_S0 12
+#define CLK_GOUT_PERIC0_RSTNSYNC_CLK_PERIC0_BUSP_CLK 13
+#define CLK_GOUT_PERIC0_SPEEDY2_TSP_CLK 14
+#define CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK 15
+#define CLK_GOUT_PERIC0_UART_DBG_EXT_UCLK 16
+#define CLK_GOUT_PERIC0_UART_DBG_PCLK 17
+#define CLK_GOUT_PERIC0_USI00_I_PCLK 18
+#define CLK_GOUT_PERIC0_USI00_I_SCLK_USI 19
+#define CLK_GOUT_PERIC0_USI01_I_PCLK 20
+#define CLK_GOUT_PERIC0_USI01_I_SCLK_USI 21
+#define CLK_GOUT_PERIC0_USI02_I_PCLK 22
+#define CLK_GOUT_PERIC0_USI02_I_SCLK_USI 23
+#define CLK_GOUT_PERIC0_USI03_I_PCLK 24
+#define CLK_GOUT_PERIC0_USI03_I_SCLK_USI 25
+
+/* CMU_PERIC1 */
+#define CLK_MOUT_PERIC1_BUS_USER 1
+#define CLK_MOUT_PERIC1_SPEEDY2_USER 2
+#define CLK_MOUT_PERIC1_SPI_CAM0_USER 3
+#define CLK_MOUT_PERIC1_SPI_CAM1_USER 4
+#define CLK_MOUT_PERIC1_UART_BT_USER 5
+#define CLK_MOUT_PERIC1_USI04_USER 6
+#define CLK_MOUT_PERIC1_USI05_USER 7
+#define CLK_MOUT_PERIC1_USI06_USER 8
+#define CLK_MOUT_PERIC1_USI07_USER 9
+#define CLK_MOUT_PERIC1_USI08_USER 10
+#define CLK_MOUT_PERIC1_USI09_USER 11
+#define CLK_MOUT_PERIC1_USI10_USER 12
+#define CLK_MOUT_PERIC1_USI11_USER 13
+#define CLK_MOUT_PERIC1_USI12_USER 14
+#define CLK_MOUT_PERIC1_USI13_USER 15
+#define CLK_GOUT_PERIC1_PERIC1_CMU_PERIC1_PCLK 16
+#define CLK_GOUT_PERIC1_RSTNSYNC_CLK_PERIC1_SPEEDY2_CLK 17
+#define CLK_GOUT_PERIC1_AXI2APB_PERIC1P0_ACLK 18
+#define CLK_GOUT_PERIC1_AXI2APB_PERIC1P1_ACLK 19
+#define CLK_GOUT_PERIC1_AXI2APB_PERIC1P2_ACLK 20
+#define CLK_GOUT_PERIC1_GPIO_PERIC1_PCLK 21
+#define CLK_GOUT_PERIC1_HSI2C_CAM0_IPCLK 22
+#define CLK_GOUT_PERIC1_HSI2C_CAM1_IPCLK 23
+#define CLK_GOUT_PERIC1_HSI2C_CAM2_IPCLK 24
+#define CLK_GOUT_PERIC1_HSI2C_CAM3_IPCLK 25
+#define CLK_GOUT_PERIC1_LHM_AXI_P_PERIC1_I_CLK 26
+#define CLK_GOUT_PERIC1_PMU_PERIC1_PCLK 27
+#define CLK_GOUT_PERIC1_RSTNSYNC_CLK_PERIC1_BUSP_CLK 28
+#define CLK_GOUT_PERIC1_SPEEDY2_DDI1_CLK 29
+#define CLK_GOUT_PERIC1_SPEEDY2_DDI1_SCLK 30
+#define CLK_GOUT_PERIC1_SPEEDY2_DDI2_CLK 31
+#define CLK_GOUT_PERIC1_SPEEDY2_DDI2_SCLK 32
+#define CLK_GOUT_PERIC1_SPEEDY2_DDI_CLK 33
+#define CLK_GOUT_PERIC1_SPEEDY2_DDI_SCLK 34
+#define CLK_GOUT_PERIC1_SPEEDY2_TSP1_CLK 35
+#define CLK_GOUT_PERIC1_SPEEDY2_TSP2_CLK 36
+#define CLK_GOUT_PERIC1_SPI_CAM0_PCLK 37
+#define CLK_GOUT_PERIC1_SPI_CAM0_SPI_EXT_CLK 38
+#define CLK_GOUT_PERIC1_SPI_CAM1_PCLK 39
+#define CLK_GOUT_PERIC1_SPI_CAM1_SPI_EXT_CLK 40
+#define CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK 41
+#define CLK_GOUT_PERIC1_UART_BT_EXT_UCLK 42
+#define CLK_GOUT_PERIC1_UART_BT_PCLK 43
+#define CLK_GOUT_PERIC1_USI04_I_PCLK 44
+#define CLK_GOUT_PERIC1_USI04_I_SCLK_USI 45
+#define CLK_GOUT_PERIC1_USI05_I_PCLK 46
+#define CLK_GOUT_PERIC1_USI05_I_SCLK_USI 47
+#define CLK_GOUT_PERIC1_USI06_I_PCLK 48
+#define CLK_GOUT_PERIC1_USI06_I_SCLK_USI 49
+#define CLK_GOUT_PERIC1_USI07_I_PCLK 50
+#define CLK_GOUT_PERIC1_USI07_I_SCLK_USI 51
+#define CLK_GOUT_PERIC1_USI08_I_PCLK 52
+#define CLK_GOUT_PERIC1_USI08_I_SCLK_USI 53
+#define CLK_GOUT_PERIC1_USI09_I_PCLK 54
+#define CLK_GOUT_PERIC1_USI09_I_SCLK_USI 55
+#define CLK_GOUT_PERIC1_USI10_I_PCLK 56
+#define CLK_GOUT_PERIC1_USI10_I_SCLK_USI 57
+#define CLK_GOUT_PERIC1_USI11_I_PCLK 58
+#define CLK_GOUT_PERIC1_USI11_I_SCLK_USI 59
+#define CLK_GOUT_PERIC1_USI12_I_PCLK 60
+#define CLK_GOUT_PERIC1_USI12_I_SCLK_USI 61
+#define CLK_GOUT_PERIC1_USI13_I_PCLK 62
+#define CLK_GOUT_PERIC1_USI13_I_SCLK_USI 63
+#define CLK_GOUT_PERIC1_XIU_P_PERIC1_ACLK 64
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS8895_H */
--
2.43.0On 20/10/2024 19:48, Ivaylo Ivanov wrote:
> Provide dt-schema documentation for Exynos8895 SoC clock controller.
> Add device tree clock binding definitions for the following CMU blocks:
> - CMU_TOP
> - CMU_FSYS0/1
> - CMU_PERIC0/1
> - CMU_PERIS
>
> Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
A nit, subject: drop second/last, redundant "bindings". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
> +
> +title: Samsung Exynos8895 SoC clock controller
> +
> +maintainers:
> + - Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
> + - Chanwoo Choi <cw00.choi@samsung.com>
> + - Krzysztof Kozlowski <krzk@kernel.org>
> + - Sylwester Nawrocki <s.nawrocki@samsung.com>
> + - Tomasz Figa <tomasz.figa@gmail.com>
Please drop Sylwester and Tomasz, they opted out from clocks.
> +
> +description: |
> + Exynos8895 clock controller is comprised of several CMU units, generating
> + clocks for different domains. Those CMU units are modeled as separate device
> + tree nodes, and might depend on each other. The root clock in that root tree
> + is an external clock: OSCCLK (26 MHz). This external clock must be defined
> + as a fixed-rate clock in dts.
> +
> + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> + dividers; all other clocks of function blocks (other CMUs) are usually
> + derived from CMU_TOP.
> +
> + Each clock is assigned an identifier and client nodes can use this identifier
> + to specify the clock which they consume. All clocks available for usage
> + in clock consumer nodes are defined as preprocessor macros in
> + 'include/dt-bindings/clock/samsung,exynos8895.h' header.
> +
> +properties:
> + compatible:
> + enum:
> + - samsung,exynos8895-cmu-top
> + - samsung,exynos8895-cmu-fsys0
> + - samsung,exynos8895-cmu-fsys1
> + - samsung,exynos8895-cmu-peric0
> + - samsung,exynos8895-cmu-peric1
> + - samsung,exynos8895-cmu-peris
Alphabetical order.
> +
> + clocks:
> + minItems: 1
> + maxItems: 16
> +
> + clock-names:
> + minItems: 1
> + maxItems: 16
> +
> + "#clock-cells":
> + const: 1
> +
> + reg:
> + maxItems: 1
> +
required: block should go here (I know that other Samsung clock bindings
do not follow this convention).
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,exynos8895-cmu-top
> +
> + then:
> + properties:
> + clocks:
> + items:
> + - description: External reference clock (26 MHz)
> +
> + clock-names:
> + items:
> + - const: oscclk
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,exynos8895-cmu-fsys0
> +
> + then:
> + properties:
> + clocks:
> + items:
> + - description: External reference clock (26 MHz)
> + - description: CMU_FSYS0 BUS clock (from CMU_TOP)
> + - description: CMU_FSYS0 DPGTC clock (from CMU_TOP)
> + - description: CMU_FSYS0 MMC_EMBD clock (from CMU_TOP)
> + - description: CMU_FSYS0 UFS_EMBD clock (from CMU_TOP)
> + - description: CMU_FSYS0 USBDRD30 clock (from CMU_TOP)
> +
> + clock-names:
> + items:
> + - const: oscclk
> + - const: bus
> + - const: dpgtc
> + - const: mmc_embd
mmc
> + - const: ufs_embd
ufs
> + - const: usbdrd30
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,exynos8895-cmu-fsys1
> +
> + then:
> + properties:
> + clocks:
> + items:
> + - description: External reference clock (26 MHz)
> + - description: CMU_FSYS1 BUS clock (from CMU_TOP)
> + - description: CMU_FSYS1 MMC_CARD clock (from CMU_TOP)
> + - description: CMU_FSYS1 PCIE clock (from CMU_TOP)
> + - description: CMU_FSYS1 UFS_CARD clock (from CMU_TOP)
> +
> + clock-names:
> + items:
> + - const: oscclk
> + - const: bus
> + - const: mmc_card
mmc
Although now I wonder, why this is different FSYS. Is it for different
mmc controller?
> + - const: pcie
> + - const: ufs_card
ufs
Keep the order as in GS101 file.
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,exynos8895-cmu-peric0
> +
> + then:
> + properties:
> + clocks:
> + items:
> + - description: External reference clock (26 MHz)
> + - description: CMU_PERIC0 BUS clock (from CMU_TOP)
> + - description: CMU_PERIC0 UART_DBG clock (from CMU_TOP)
> + - description: CMU_PERIC0 USI00 clock (from CMU_TOP)
> + - description: CMU_PERIC0 USI01 clock (from CMU_TOP)
> + - description: CMU_PERIC0 USI02 clock (from CMU_TOP)
> + - description: CMU_PERIC0 USI03 clock (from CMU_TOP)
> +
> + clock-names:
> + items:
> + - const: oscclk
> + - const: bus
> + - const: uart_dbg
uart
> + - const: usi00
usi0
> + - const: usi01
usi1
> + - const: usi02
usi2
> + - const: usi03
usi3
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,exynos8895-cmu-peric1
> +
> + then:
> + properties:
> + clocks:
> + items:
> + - description: External reference clock (26 MHz)
> + - description: CMU_PERIC1 BUS clock (from CMU_TOP)
> + - description: CMU_PERIC1 SPEEDY2 clock (from CMU_TOP)
> + - description: CMU_PERIC1 SPI_CAM0 clock (from CMU_TOP)
> + - description: CMU_PERIC1 SPI_CAM1 clock (from CMU_TOP)
> + - description: CMU_PERIC1 UART_BT clock (from CMU_TOP)
> + - description: CMU_PERIC1 USI04 clock (from CMU_TOP)
> + - description: CMU_PERIC1 USI05 clock (from CMU_TOP)
> + - description: CMU_PERIC1 USI06 clock (from CMU_TOP)
> + - description: CMU_PERIC1 USI07 clock (from CMU_TOP)
> + - description: CMU_PERIC1 USI08 clock (from CMU_TOP)
> + - description: CMU_PERIC1 USI09 clock (from CMU_TOP)
> + - description: CMU_PERIC1 USI10 clock (from CMU_TOP)
> + - description: CMU_PERIC1 USI11 clock (from CMU_TOP)
> + - description: CMU_PERIC1 USI12 clock (from CMU_TOP)
> + - description: CMU_PERIC1 USI13 clock (from CMU_TOP)
> +
> + clock-names:
> + items:
> + - const: oscclk
> + - const: bus
> + - const: speedy2
speedy
> + - const: cam0
> + - const: cam1
> + - const: uart_bt
uart
> + - const: usi04
usi4, etc
> + - const: usi05
> + - const: usi06
> + - const: usi07
> + - const: usi08
> + - const: usi09
> + - const: usi10
> + - const: usi11
> + - const: usi12
> + - const: usi13
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,exynos8895-cmu-peris
> +
> + then:
> + properties:
> + clocks:
> + items:
> + - description: External reference clock (26 MHz)
> + - description: CMU_PERIS BUS clock (from CMU_TOP)
> +
> + clock-names:
> + items:
> + - const: oscclk
> + - const: bus
> +
> +required:
> + - compatible
> + - "#clock-cells"
> + - clocks
> + - clock-names
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + # Clock controller node for CMU_FSYS1
> + - |
> + #include <dt-bindings/clock/samsung,exynos8895.h>
> +
> + cmu_fsys1: clock-controller@11400000 {
> + compatible = "samsung,exynos8895-cmu-fsys1";
> + reg = <0x11400000 0x8000>;
> + #clock-cells = <1>;
> +
> + clocks = <&oscclk>,
> + <&cmu_top CLK_DOUT_CMU_FSYS1_BUS>,
> + <&cmu_top CLK_DOUT_CMU_FSYS1_MMC_CARD>,
> + <&cmu_top CLK_DOUT_CMU_FSYS1_PCIE>,
> + <&cmu_top CLK_DOUT_CMU_FSYS1_UFS_CARD>;
> + clock-names = "oscclk", "bus", "mmc_card",
> + "pcie", "ufs_card";
> + };
> +
Best regards,
Krzysztof
On 10/21/24 12:38, Krzysztof Kozlowski wrote:
> On 20/10/2024 19:48, Ivaylo Ivanov wrote:
>> Provide dt-schema documentation for Exynos8895 SoC clock controller.
>> Add device tree clock binding definitions for the following CMU blocks:
>> - CMU_TOP
>> - CMU_FSYS0/1
>> - CMU_PERIC0/1
>> - CMU_PERIS
>>
>> Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>
> A nit, subject: drop second/last, redundant "bindings". The
> "dt-bindings" prefix is already stating that these are bindings.
> See also:
> https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
>
>> +
>> +title: Samsung Exynos8895 SoC clock controller
>> +
>> +maintainers:
>> + - Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>> + - Chanwoo Choi <cw00.choi@samsung.com>
>> + - Krzysztof Kozlowski <krzk@kernel.org>
>> + - Sylwester Nawrocki <s.nawrocki@samsung.com>
>> + - Tomasz Figa <tomasz.figa@gmail.com>
> Please drop Sylwester and Tomasz, they opted out from clocks.
>
>> +
>> +description: |
>> + Exynos8895 clock controller is comprised of several CMU units, generating
>> + clocks for different domains. Those CMU units are modeled as separate device
>> + tree nodes, and might depend on each other. The root clock in that root tree
>> + is an external clock: OSCCLK (26 MHz). This external clock must be defined
>> + as a fixed-rate clock in dts.
>> +
>> + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
>> + dividers; all other clocks of function blocks (other CMUs) are usually
>> + derived from CMU_TOP.
>> +
>> + Each clock is assigned an identifier and client nodes can use this identifier
>> + to specify the clock which they consume. All clocks available for usage
>> + in clock consumer nodes are defined as preprocessor macros in
>> + 'include/dt-bindings/clock/samsung,exynos8895.h' header.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - samsung,exynos8895-cmu-top
>> + - samsung,exynos8895-cmu-fsys0
>> + - samsung,exynos8895-cmu-fsys1
>> + - samsung,exynos8895-cmu-peric0
>> + - samsung,exynos8895-cmu-peric1
>> + - samsung,exynos8895-cmu-peris
> Alphabetical order.
>
>> +
>> + clocks:
>> + minItems: 1
>> + maxItems: 16
>> +
>> + clock-names:
>> + minItems: 1
>> + maxItems: 16
>> +
>> + "#clock-cells":
>> + const: 1
>> +
>> + reg:
>> + maxItems: 1
>> +
> required: block should go here (I know that other Samsung clock bindings
> do not follow this convention).
>
>> +allOf:
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: samsung,exynos8895-cmu-top
>> +
>> + then:
>> + properties:
>> + clocks:
>> + items:
>> + - description: External reference clock (26 MHz)
>> +
>> + clock-names:
>> + items:
>> + - const: oscclk
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: samsung,exynos8895-cmu-fsys0
>> +
>> + then:
>> + properties:
>> + clocks:
>> + items:
>> + - description: External reference clock (26 MHz)
>> + - description: CMU_FSYS0 BUS clock (from CMU_TOP)
>> + - description: CMU_FSYS0 DPGTC clock (from CMU_TOP)
>> + - description: CMU_FSYS0 MMC_EMBD clock (from CMU_TOP)
>> + - description: CMU_FSYS0 UFS_EMBD clock (from CMU_TOP)
>> + - description: CMU_FSYS0 USBDRD30 clock (from CMU_TOP)
>> +
>> + clock-names:
>> + items:
>> + - const: oscclk
>> + - const: bus
>> + - const: dpgtc
>> + - const: mmc_embd
> mmc
>
>> + - const: ufs_embd
> ufs
>
>> + - const: usbdrd30
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: samsung,exynos8895-cmu-fsys1
>> +
>> + then:
>> + properties:
>> + clocks:
>> + items:
>> + - description: External reference clock (26 MHz)
>> + - description: CMU_FSYS1 BUS clock (from CMU_TOP)
>> + - description: CMU_FSYS1 MMC_CARD clock (from CMU_TOP)
>> + - description: CMU_FSYS1 PCIE clock (from CMU_TOP)
>> + - description: CMU_FSYS1 UFS_CARD clock (from CMU_TOP)
>> +
>> + clock-names:
>> + items:
>> + - const: oscclk
>> + - const: bus
>> + - const: mmc_card
> mmc
> Although now I wonder, why this is different FSYS. Is it for different
> mmc controller?
FSYS0 provides clocks for embedded storages (UFS and eMMC), whereas FSYS1
clocks external storage cards (UFS and MMC cards). As far as I can tell, there's
only one MMC controller, so perhaps it could be set to drive an eMMC or an SD
card. On retail devices, UFS_EMBD and MMC_CARD are used.
Thanks for the review, will fix the issues in the next patchset.
Best regards, Ivo.
>
>> + - const: pcie
>> + - const: ufs_card
> ufs
>
> Keep the order as in GS101 file.
>
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: samsung,exynos8895-cmu-peric0
>> +
>> + then:
>> + properties:
>> + clocks:
>> + items:
>> + - description: External reference clock (26 MHz)
>> + - description: CMU_PERIC0 BUS clock (from CMU_TOP)
>> + - description: CMU_PERIC0 UART_DBG clock (from CMU_TOP)
>> + - description: CMU_PERIC0 USI00 clock (from CMU_TOP)
>> + - description: CMU_PERIC0 USI01 clock (from CMU_TOP)
>> + - description: CMU_PERIC0 USI02 clock (from CMU_TOP)
>> + - description: CMU_PERIC0 USI03 clock (from CMU_TOP)
>> +
>> + clock-names:
>> + items:
>> + - const: oscclk
>> + - const: bus
>> + - const: uart_dbg
> uart
>
>> + - const: usi00
> usi0
>
>> + - const: usi01
> usi1
>
>> + - const: usi02
> usi2
>
>> + - const: usi03
> usi3
>
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: samsung,exynos8895-cmu-peric1
>> +
>> + then:
>> + properties:
>> + clocks:
>> + items:
>> + - description: External reference clock (26 MHz)
>> + - description: CMU_PERIC1 BUS clock (from CMU_TOP)
>> + - description: CMU_PERIC1 SPEEDY2 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 SPI_CAM0 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 SPI_CAM1 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 UART_BT clock (from CMU_TOP)
>> + - description: CMU_PERIC1 USI04 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 USI05 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 USI06 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 USI07 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 USI08 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 USI09 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 USI10 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 USI11 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 USI12 clock (from CMU_TOP)
>> + - description: CMU_PERIC1 USI13 clock (from CMU_TOP)
>> +
>> + clock-names:
>> + items:
>> + - const: oscclk
>> + - const: bus
>> + - const: speedy2
> speedy
>
>> + - const: cam0
>> + - const: cam1
>> + - const: uart_bt
> uart
>
>> + - const: usi04
> usi4, etc
>
>> + - const: usi05
>> + - const: usi06
>> + - const: usi07
>> + - const: usi08
>> + - const: usi09
>> + - const: usi10
>> + - const: usi11
>> + - const: usi12
>> + - const: usi13
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: samsung,exynos8895-cmu-peris
>> +
>> + then:
>> + properties:
>> + clocks:
>> + items:
>> + - description: External reference clock (26 MHz)
>> + - description: CMU_PERIS BUS clock (from CMU_TOP)
>> +
>> + clock-names:
>> + items:
>> + - const: oscclk
>> + - const: bus
>> +
>> +required:
>> + - compatible
>> + - "#clock-cells"
>> + - clocks
>> + - clock-names
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + # Clock controller node for CMU_FSYS1
>> + - |
>> + #include <dt-bindings/clock/samsung,exynos8895.h>
>> +
>> + cmu_fsys1: clock-controller@11400000 {
>> + compatible = "samsung,exynos8895-cmu-fsys1";
>> + reg = <0x11400000 0x8000>;
>> + #clock-cells = <1>;
>> +
>> + clocks = <&oscclk>,
>> + <&cmu_top CLK_DOUT_CMU_FSYS1_BUS>,
>> + <&cmu_top CLK_DOUT_CMU_FSYS1_MMC_CARD>,
>> + <&cmu_top CLK_DOUT_CMU_FSYS1_PCIE>,
>> + <&cmu_top CLK_DOUT_CMU_FSYS1_UFS_CARD>;
>> + clock-names = "oscclk", "bus", "mmc_card",
>> + "pcie", "ufs_card";
>> + };
>> +
>
> Best regards,
> Krzysztof
>
© 2016 - 2024 Red Hat, Inc.