Document the Device Tree binding for PM8937 MPPs.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 43146709e2044d9dead08a6786b98672ef766629..9364ae05f3e68f3a2f4dd78ba3c0f94b3ccc3c51 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -22,6 +22,7 @@ properties:
               - qcom,pm8226-mpp
               - qcom,pm8841-mpp
               - qcom,pm8916-mpp
+              - qcom,pm8937-mpp
               - qcom,pm8941-mpp
               - qcom,pm8950-mpp
               - qcom,pmi8950-mpp
@@ -92,6 +93,7 @@ $defs:
           this subnode.  Valid pins are
                  - mpp1-mpp4 for pm8841
                  - mpp1-mpp4 for pm8916
+                 - mpp1-mpp4 for pm8937
                  - mpp1-mpp8 for pm8941
                  - mpp1-mpp4 for pm8950
                  - mpp1-mpp4 for pmi8950

-- 
2.47.0

On Sat, 19 Oct 2024 13:50:40 +0200, Barnabás Czémán wrote:
> Document the Device Tree binding for PM8937 MPPs.
> 
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241019-msm8917-v1-3-f1f3ca1d88e5@mainlining.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.