From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Document two supplies that are used by this model and the optional
xo-clk signal.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
.../devicetree/bindings/regulator/qcom,qca6390-pmu.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml b/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml
index 11ed04c95542..ca401a209cca 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml
@@ -33,6 +33,12 @@ properties:
vddpmu-supply:
description: VDD_PMU supply regulator handle
+ vddpmumx-supply:
+ description: VDD_PMU_MX supply regulator handle
+
+ vddpmucx-supply:
+ description: VDD_PMU_CX supply regulator handle
+
vddio1p2-supply:
description: VDD_IO_1P2 supply regulator handle
@@ -72,6 +78,10 @@ properties:
maxItems: 1
description: GPIO line indicating the state of the clock supply to the BT module
+ xo-clk-gpios:
+ maxItems: 1
+ description: GPIO line allowing to select the XO clock configuration for the module
+
clocks:
maxItems: 1
description: Reference clock handle
@@ -119,6 +129,8 @@ allOf:
- vddio-supply
- vddaon-supply
- vddpmu-supply
+ - vddpmumx-supply
+ - vddpmucx-supply
- vddrfa0p95-supply
- vddrfa1p3-supply
- vddrfa1p9-supply
--
2.43.0